Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC NEAR SVN UNIVERSITY NARSINGHPUR ROAD SIRONJA SAUGOR MP 470228 | SAUGOR | SAGAR | MP | 470228 | L1 | Accepted-AOC Approved by Accepting officer | |
| 2 | L2₹8.1 L+₹1.5 L (23.2%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹8.8 L+₹2.3 L (34.7%)Rejected-Finance ANAND NAGAR ROAD NO 4 RAJAKHEDI MAKRONIA SAUGOR MP | SAUGOR | SAUGOR | MP | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹9.4 L+₹2.9 L (43.8%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder |
| Sl No | Description | Qty | Unit | M/S JAINENDRA KUMAR JAIN L1 | Pandey Construction and Engrs L3 | SUNIL KUMAR KORPAL L2 | m/s mahendra kumar khare contractor L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each, complete all as specified and as directed. | 12 | Each | 5 ₹60 Lowest | 40 ₹480 | 50 ₹600 | 70 ₹840 |
| 2.00 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each, complete all as specified and as directed. | 30 | Each | 5 ₹150 Lowest | 40 ₹1,200 | 50 ₹1,500 | 50 ₹1,500 |
| 3.00 | Taking down wooden shutter of any description area exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and as directed. | 10 | Per Leaf | 5 ₹50 Lowest | 20 ₹200 | 50 ₹500 | 30 ₹300 |
| 4.00 | Supply and fixing 2nd class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkhats with coal tar/ black paint etc, complete all as specified and directed. | 0.25 | Cum | 12,000 ₹3,000 Lowest | 40,000 ₹10,000 | 25,000 ₹6,250 | 38,000 ₹9,500 |
| 5.00 | Supply and fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed. | 25 | Rm | 300 ₹7,500 Lowest | 400 ₹10,000 | 500 ₹12,500 | 440 ₹11,000 |
| 6.00 | Supply and fixing 165 x 60 mm size Pressed steel frames 1.25mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed. | 25 | Rm | 280 ₹7,000 Lowest | 410 ₹10,250 | 500 ₹12,500 | 550 ₹13,750 |
| 7.00 | Material and labour for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. | 16 | Sqm | 630 ₹10,080 Lowest | 1,800 ₹28,800 | 2,200 ₹35,200 | 2,050 ₹32,800 |
| 8.00 | Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of Ist class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkats, complete as specified and directed. | 16 | Sqm | 900 ₹14,400 Lowest | 1,800 ₹28,800 | 1,300 ₹20,800 | 2,150 ₹34,400 |
| 9.00 | Supply and fixing 30 mm thick Flush shutters, solid core construction, and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in Charge | 6 | Sqm | 900 ₹5,400 Lowest | 1,800 ₹10,800 | 1,800 ₹10,800 | 1,950 ₹11,700 |
| 10.00 | Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyster paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder up to 50-60 microns thick outer frame section 72x55 mm, centre mullion section 72x50 mm, shutter section 47x20 mm, fly mesh section 40x20 mm and the fixed glass beading section 12x12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for gaurd bars/grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete/stone or brick masonary wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (Minimum 4 nos for 1600mm high windows, 3 Nos for 1200 mm less window and 2 nos in ventilator ), including 10 mm square bars welded to 6x12 mm flat at a distance 125 mm c/c etc as per direction of engineer in chaege. | 15 | Sqm | 6,400 ₹96,000 Lowest | 7,500 ₹1,12,500 | 7,800 ₹1,17,000 | 9,000 ₹1,35,000 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
7 Aug 2025, 6:00 pmClosed
Madan Lal Beniwal, IDSE, AEE Civil
AGE I DHANA PIN 470228, DIST SAGAR, MP
REPAIR / REPLACEMENT OF JOINERY, PLUMBING FITTINGS ETC, AND ALLIED B AND R MD ACCN OF NCO ACADEMY AT DHANA MIL STN.
2025_MES_718159_1
8300/DH/13/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) DHANA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Assistant Garrison Engineer (I) Dhana
₹20,000
Yes
10 Oct 2025
7 Jul 2025
9 Aug 2025
7 Jul 2025
7 Aug 2025
21 Jul 2025
Amount
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each, complete all as specified and as directed.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each, complete all as specified and as directed.
Taking down wooden shutter of any description area exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and as directed.
Supply and fixing 2nd class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkhats with coal tar/ black paint etc, complete all as specified and directed.
Supply and fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed.
Supply and fixing 165 x 60 mm size Pressed steel frames 1.25mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed.
Material and labour for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of Ist class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkats, complete as specified and directed.
Supply and fixing 30 mm thick Flush shutters, solid core construction, and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in Charge
Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyster paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder up to 50-60 microns thick outer frame section 72x55 mm, centre mullion section 72x50 mm, shutter section 47x20 mm, fly mesh section 40x20 mm and the fixed glass beading section 12x12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for gaurd bars/grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete/stone or brick masonary wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (Minimum 4 nos for 1600mm high windows, 3 Nos for 1200 mm less window and 2 nos in ventilator ), including 10 mm square bars welded to 6x12 mm flat at a distance 125 mm c/c etc as per direction of engineer in chaege.
Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates, grill including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron complete all as specified and directed by Engr in Charge
Supply and fixing aluminium anodised powder coated window and ventilator shutters side hung type or sliding type with or without sash bars of aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading , screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no ) , hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt ( 2 nos) complete all as specified and directed by Engr in Charge
Supply & fixing tinted / coulered floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 5 mm thick complete all as per specified and directed. Make:- Modiguard/ saintgobin / Hariyana glass complete all as specified and directed by Engr in Charge
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
Material & labour mild steel work in framed work such as grills, gratings, guard bars etc., including angle frame and hinges where required with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confiRming to Fe 290.Gde-E-165, complete all as specified and directed.
Material & labour in Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round haded screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitered angles etc as requires complete all as specified and directed by Engr in Charge
Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified and directed by Engr in Charge
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr in Charge
Supply & fixing tinted / coulered floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 4 mm thick complete all as per specified and directed. Make:- Modiguard/ saintgobin / Hariyana glass complete all as specified and directed by Engr in Charge
Supply & fixing Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.
Supply & fixing in repair Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.
Supply and fixing in repair Harrison rail/mild steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length complete all as specified and directed by Engr in Charge
Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete as specified and directed.
Material & labour 150mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engr in Charge
Supply & fixing 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engr in Charge
Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and directed by Engr in Charge
Demolition of brick / stone masonry built in cement mortar, all as directed.
Material & labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.
Material & labour for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), including preparing new plastered surface of wall and applying two coats of white wash complete all as specified and directed.
Material and labour for for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including preparing new plastered surface of wall and applying two coats of white wash complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed by Engr in Charge
Material and labour for for 15 to 18 mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing in cooking plateform complete over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 complete all as specified and directed by Engr in Charge
Rounding to edges of the stone slabe on edge such as cooking plateform and other similar work complete all as specified and directed by Engr in Charge
Material and labour for15 to 18 mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing complete in skirting over and including backing coat in cement mortar 1:4, 10 mm thick complete all as specified.
Virified Ceramic tiles 10 mm thick (square/ rectangular) light shed polished, area of each tiles exc 0.18 sqm and not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 complete all as specified and directed by Engr in Charge
Material and labour for vetrified tiles 10mm thick (square or rectangular ) light shed, polished area of each tiles not exceeding 0.36sqm in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or cloloured cement to match including backing coat 10mm thick in CM 1:4 complete all as specified and directed by Engr in Charge
Material and labour Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.09 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.
Material and labour for for glazed coloured ceramic, designer/ concept patern tiles 300mmx600mm/ 300mm x 450mm x7mm thick set and jointed in neat cement slurry in vertical surfaces and jointed in white cement with pigment to match colour over 10mm thick rendring in CM (1:4) including taking down old dado/skirting/wall finishes of any description, complete all as specified and directed.
Material and labour for Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick cement screed 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr in Charge
Material and labour for Bees-wax polishing on kota stone/ granite or any other surfaces of any description, width or girth including cleaning and preparing the surfaces as directed and speicifed by engr in charge
Material & labour machine cut cudappah stone slabe 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr in Charge
Rounding to edges of stone slabs one edge, such as in cooking plateform etc. and other similar situation complete all as specified and directed by Engr in Charge
Material & labour for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in floor,sub base complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr in Charge
Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 15mm bore complete all as specified and directed.
Supply & fixing in repair 15mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed.
Supply & fixing in repair vitreous china wash basin white flat back size 550x400mm with padestal including PVC waste pipe , CP pillar tap Sawn neckCP waste coupling brackets , PVC conncetions 15mm dia 450mm long complete all as specified and directed.
Supply & fixing in repair Bib tap 15mm standerd of cast copper alloy with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and directed.
Supply & fixing in repair 15mm stop valve standerd of cast copper alloy with crutch or butterfly handlehigh pressure screwed for iron pipe and fixed complete all as specified and directed.
Supply & fixing in repair 15mm dia shower rose of PTMT any colour high pressure screwed for iron pipe and fixed (min wt 40 grms ) complete all as specified and directed.
Supply & fixing in repairs vitreous China squatting pan, 'Orrissa' pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and direrected.
Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern ) white including plastic water closet set black closed pattern with flat bottom and cover with mild steel chromium plated hinging devices and chromium plated Jet arrengement with 1.00 mtr long flexible pipe for fixed with suitable system complete all as specified and directed.
Supply & fixing as in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, and PVC connection 15mm dia complete all as specified and directed.
Supply and fixing 20mm dia brass CP tubular towel rail D type 60 cm long fixed with bracket complete all as specified and directed.
Supply and fixing 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete as directed.
Supply and fixing in repair kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed.
Supply and fixing kitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over all size 1050mm x 750mm x250mm complete all as specified and as directed.
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level), as directed.
Material & labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth with using extra cement, complete all as specified and directed.
Supply & fixing glass dividing strips, 38 x 3 mm thick and inserted in position, confirm to design, complete all as specified and directed.
Material & labour for 50mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone agg finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m in forming and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.
Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed.
Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.
Material and labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.
All as per item No. 18 above but one coat of synthetic enamel paint over old steel surfaces and -ditto-
Supply and fixing in repair 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed.
Supply and fixing in repair 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed.
NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 14252.00 /- ]
SUNIL KUMAR KORPAL (BID ID -3382327)
Pandey Construction and Engrs (BID ID -3385444)
m/s mahendra kumar khare contractor (BID ID -3382110)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .