CONSTRUCTION OF PROCESSING UNIT (267.027 Sqm) AND WAREHOUSE (2070 MT)

Amount

Civil Work

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and all lifts stacking and spreading as directed, dewatering, shoring, strutting and preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and strutting) including all leads and lifts etc.complete.

Excavation for foundation in hard murum including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting including all leads and lifts etc.complete.

Excavation for foundation in soft rock and old cement and lime masonry foundations including removing the excavated material upto a distance 50 meters, beyond the building area and stacking as directed including dewatering, preparing the bed for the foundation and necessary back filling, with available earth murum, ramming, watering including shoring and strutting including all leads and lifts etc.complete.

Filling in plinth and floors with approved excavated materials in 15cm to 20cm layers including watering and compaction including all leads and lifts etc.complete.

Filling in plinth and floors with contractors soil sand or murum in 15cm to 20cm layers including watering and compaction including all leads and lifts etc.complete.

Providing soling using 80mm size trap metal in 15cm layer including filling voids with sand / grit ramming, watering including all leads and lifts etc.complete.

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted / bolted / welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting including all leads and lifts etc.complete.

Providing and laying in situ, cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including dewatering, formwork, compacting, roughening them if special finish is to be provided, finishing if required and curing with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer including all leads and lifts etc.complete.

Providing and laying in situ cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, compaction and finishing, curing with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer including all leads and lifts etc.complete.

Providing and casting in situ cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, compacting, finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer including all leads and lifts etc.complete.

Providing and casting in situ cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork of plywood / steel, compaction and roughening the surface if special finish is to be provided and curing etc. complete (excluding steel reinforcement) with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer including all leads and lifts etc.complete.

Providing and casting in situ cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. slabs and landings as per detailed designs and roughening the specified as directed including centering, formwork, roughening if special finish is to be provided and curing with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer including all leads and lifts etc.complete.

Providing and casting in situ cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. chajja as per detailed designs and drawings or as directed including centering formwork of steel, compaction, roughening if special finish is to be provided and curing with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer including all leads and lifts etc.complete.

Providing and fixing in position T.M.T. bar reinforcement (Produced from iron ore and made through blast furnace route as per IS 1786-2008) of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajja, lintels, pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required including all leads and lifts etc.complete.

Providing second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, racking out joints on exposed faces and watering including all leads and lifts etc.complete.

Providing second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding including all leads and lifts etc.complete.

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing including all leads and lifts etc.complete.

Providing sand faced plaster externally in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1 Kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6mm to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffoldingincluding all leads and lifts etc.complete.

Providing and laying in situ cement concrete M-20 with tremix treatment for 100mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen including all leads and lifts etc.complete.

Providing and laying polished Kotah stone slabs 20mm to 25mm thick for treads and risers of steps and staircases, in one piece upto 1.35m width with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning including all leads and lifts etc.complete.

Providing and applying two coats of synthetic enamel paint of approved colour to the new / old structural steel work and wood work in building, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) including all leads and lifts etc.complete.

Providing and applying two coats of water proof cement paint of approved manufacture and approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surfaces, watering for two days including all leads and lifts etc.complete.

Providing and applying one coat of seal cement primer of approved manufacture and shade including scaffolding, preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding including all leads and lifts etc.complete.

Providing and applying white wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down complete.

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces including all leads and lifts etc.complete.

Providing and fixing of colour coated zincalume (R) AZ 150 (Minimum 150 grams per square metre total on each sides) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre base metal thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with minium 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55 percent aluminium, 43.4 percent zinc, 1.6 percent silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. The end rib shall be designed for anti capilary groove and return leg. The feed material should have coil manufacturer's product details marked at regular interval. Including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, including all leads and lifts etc.complete.

Providing and fixing of colour coated Zinc aluminium(R)AZ 150 (min 150 gms/sq.mt.total on each side)profiled sheets for roofing.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT)(0.5 mm TCT),Hi-strength steel with min. 550 M Pay ield strength, metallic hot dip coated with Aluminium -Zincalloy (55%aluminiumm 43.4 % zinc 1.6 % silicon)with COLOR BOND(R)steel quality super durable polyster paint coat (with in organic pigment).The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25 mm exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five panat nominal 180-250 mm center-to-center.Theen drib shall be designed for anti-capacity groove. and return leg.The feed material should have coil manufacturers product details marked a regular interval. including fasteners withmin .fastened with min.25 um Zinc-Tin alloy coated, Hex head,self-drilling screw including all leads and lifts etc.complete.

Providing and fixing rolling shutter fabricated from 18 gauge steel laths with side guides, bottom rail, brackets, door suspension shaft including rolling springs, locking arrangement and housing box at the top including mechanical gear operation arrangement and one coat of red lead primer including all leads and lifts etc.complete.

Providing and fixing in position, powder coated with approved shade aluminum windows / ventilators of various size with openable / sliding aluminum frame 5mm thick plain sheet glass shutter glazing clips / rubber / PVC gasket of approved quality chromium plated brass wigs, other aluminum fixture and fastening handle, stopper etc. complete including making the damaged structure to its original condition including all leads and lifts etc.complete.

Providing and fixing steel ventilator of variuous sizes as per detailed drawing fabricated from IS standard sections without hot dip zinc coating including fabricating glazing with reinforcement panels of approved type and quality, all fixtures and fastenings without teak wood boxing, and architraves and finishing with one coat of primer complet with guard bars 12mm square 10cm c/c.including all leads and lifts etc.complete.

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kg./ Sq.Mt. as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting including all leads and lifts etc.complete.

Providing pre-constructional antitermite treatment by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrates at 0.5 percent of Chicropyriphox per square meter of surface area with ten years guarantee bond as per IS 6313 (Part III) 1971 including all leads and lifts etc.complete.

Turbo Ventilator

Conveying materials obtained from excavation including all lifts,laying in layers of 20cm. to 30cm.breaking clods,dressing to the required lines,curves,grades and section,watering and compacting to not less than 97%of standard proctor density for a lead of 300m.to500m. inclusive,from the site of excavation to the site of deposition as directed including all leads and lifts etc.complete.

Royalty Charges

For Murum

Soling

Laboratory test

BASIC TEST OF AGGREGATE

Water Absorption, Specific Gravity,Impact Value, Crushing Value.

Sieve Analysis.

Abrasion Value.

Flakiness Index & Elongation Index.

BRICKS

Water Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

CONCRETE

Compressive Strength OF C.C. Cube (Set of 3 cubes).

STEEL

Steel bar testing upto 16 mm (set of 3 bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct.

Ms. Rasika Construction, Miraj