REPAIR TO AC SHEETS MANGALORE TILES AND ROOF TREATMENT JOINERY FLOORING SUNKEN FLOOR PLASTERING PLUMBING SANITORY FITTINGS AND SERVICE TANK CLEANING UNDER GE S SECUNDERABAD

Amount

Demolition of cement concrete of any description any thickness and in any position not otherewise specifically provided for including removal of old treatment of any description complete all as specified and as directed.

Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in padding concrete (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even with out using extra cement. complete all as specified and as directed. (Note : Supply of water proofing compound will be measured and paid separately .

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in base of water tank on roof surface, edging, kerbs etc complete all as specified and as directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3.complete all as specified and as directed.

Matrial & labour for water proofing treatment with APP based standerd membrane over PCC padding of roof with the following courses of treatment :- (a) Applying of bituminous primer @0.30 kg/Sqm as per IS-3384 including cleaning the surfaces complete all as specified and directed (b) Applying of minimum 3mm thick APP based polymeric membrane (mineral finished) weighing 3.5 Kg / Sqm reinforced with polyster non woven fabric (wt not less than 150 gm/Sqm) with 10cm overlaps and tourch bounded at joints including surface preparation before and after application of treatment as per manufacturers instructions complete all as specified and directed.

Supply only integral water proofing compound.

M&L PCC1:2:4 using B0 (using12.50mm graded aggregate) for coping, corner of roof and similar work complete all as sepcified and directed.

M&L for making good of the fallen/broken portion of the RCC roof/ceiling with proper reinforcement binding & application of anti corrosive paint for avoiding rusting of old steel reinforcement complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description.complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement.complete all as specified and as directed.

M&L for prepartaion of new plastered surfaces of wall, and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered or un- plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Disconnecting existing tanks of exc 250 but n exc 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks of exc 500 but n exc 1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position with cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling of existing damaged water tanks.complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling of existing damaged water tanks.complete all as specified and as directed.

S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed to iron pipes.complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore complete all as specified and directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,15mm bore.including taking down old pipe complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.

Demolition and beaking up drain AC pipes/PVC pipe set in cement mortar complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed.

Dismantling timber scantlings in unframed work 40 sq. cm and over in section fixed in any position complete all as specified and as directed.

S&F Rolled sections of grade Fe 410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.

S & F 6mm thick AC corrugated sheets in roofs walls etc fixed with J- type hooks & bolts complete all as specified and as directed.

All as per item 29 here-in-before but Except AC Sheet

S & F 6mm thick Ac two piece serrated Ridge for corrugated sheets fixed with J-type hooks and bolts complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqn each complete all as specified and as directed.

All as per item 34 here-in-before but area exc. 1.5 Sq.m but not exc. 4 Sq.m each.complete all as specified and as directed.

Taking down shutters of any description not exc. 1.00 Sq.m each complete all as specified and as directed.

All as per item 36 here-in-before but exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each.complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F of pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

S&F of pressed steel frames of size 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-0 (Using 12.5 mm graded stone aggregate) as in filling in pressed steel frame complete all as specified and as directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410W (Gde E-250) Quality'A' with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and as directed.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint complete all as specified and as directed.

S&F mild steel flat iron hold fast of any size and similar articles confirming Fe 290 Grade E-165 complete all as specified and as directed.

M & L for PCC (1;3:6) type C1 using 20mm graded stone aggregate as in bed blocks, copings, etc including necessary form work complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and as directed.

S&F 30 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed.

S & F, steel windows with side hung shutters including projecting or box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as per item 49 here-in-before but with out glazing bar complete all as specified and as directed.

S & F, steel ventilators with pressed steel frame and top hung shutter including projecting/box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F Anodiesed aluminium frame for doors, windows ventilators with one or more rebats including jointing cleats for fixing etc complete all as specified

S&F Anodised aluminium door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S & F anodised aluminium window shutters, sliding type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such a peg stays 150mm long (1No) hinges type D-21 100mm long (2No) suitable handle (1No) complete all as specified.

S & F brass Mortice lock 4 leavers vertical type size 100mm complete all as specified and as directed.

All as per item 55 here-in-before but supply and fixed in repairs. complete all as specified and as directed.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed. complete all as specified and as directed.

S & F 100mm long butt hinges extruted alluminium alloy with galvanised Mild steel hinge pin anodised and fixed type B21 complete all as specified and as directed.

S & F 150mm long floor door stopper of aluminium alloy body and tongue anodised with hard steel spring fixed in floor complete all as specified and as directed.

S & F Aluminium (Die cast ) body door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs. complete all as specified and as directed.

All as per item 60 here-in-before but Supply and fixing in repairs complete all as specified and as directed.

S & F 12 mm thick prelaminated particle board interrior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips

All as per item 62 here-in-before but supply and fixed in repairs complete all as specified and as directed.

S & F sheet glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips of any description. complete all as specified and as directed. Exc 0.5 Sq.m in each pan

All as per item 64 here-in-before but supply and fixed in repairs. complete all as specified and as directed.

S&F 125mm long MS butt hinges, medium weight cold rolled. complete all as specified and as directed.

S&F 75mm long MS butt hinges, medium weight cold rolled. complete all as specified and as directed.

S & F 200mm long aluminium anodised Tower bolts of extruted section and fixed complete all as specified and as directed.

S & F 150mm long aluminium anodised Tower bolts of extruted section and fixed complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised. complete all as specified and as directed.

S&F300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. complete all as specified and as directed.

S&F in repair 2nd class hard wood in fillets,square, rectangular in section wrought, secured with nails sectional area exc 13 Sqcm and n.exc 25 Sqcm fixed in repairs. complete all as specified and as directed.

S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design Fe 290 Grade E-165. complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples in repairs complete all as specified and as directed.

S&F second class hard wood 30mm thgick Glazed and ske- leton shutters, open rebated and prepared to receive glass, gauze, etc. (w/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. complete all as specified and as directed.

All as per item 78 here-in-before but figured glass, pin head type. complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer. complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S & Fin repair 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete.as in repairs complete all as specified and as directed.

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed.

S & F in repairs anodised aluminium snap grid frame work for false ceiling including supporting wire all as specified of size of grid 605 x 605mm. complete all as specified and as directed.

S & F 4mm thick non-asbestos fibre cement building boards fixed or laid/inserted to aluminium / wooden frame work with screws including two coats of OBD over a coat of alkali resistant primer and preparation of new surfaces of ceiling. complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 100 mm dia complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 75 mm dia complete all as specified and as directed.

S&F in repair 75 mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2:4, type B1, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F in repairs 20mm dia ball brass valves high pressure with polyethelene float and fly nuts complete screwed for iron pipe or brass ferrule and fixed. complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc for tanks exc 250 and n.exc 500 ltrs. complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc for tanks exc 500 and n.exc 1000 ltrs. complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and as directed.

S&F in repair bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore Stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type), complete all as specified and as directed.

S&F 300 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S&Fin repair vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S & F in repairs, vitreous china bowl urinal, white, flat back, size of 465x355x265mm, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs 10 ltrs capacity PVC valvless syphonic action type low level flushing cistern white colour with inlet, ball valve, float and handle complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, incl. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S, CP or aluminium hinging device, complete all as specified and as directed.

S & F in repairs water closet (squatting pan) complete incl provison of lime concrete bedding ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including 10 ltr capacity PVC flushing cistern and flush pipe,15mm PVC connection of size 450mm , complete all as directed and as specified by Engineer-in-charge.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

M & L for brick work with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with fly ash brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as directed and as specified by Engineer-in-charge.

M & L Rendering 15mm thick in CM 1:6 on brick or concrete surfaces including finihsed the surface smooth and even without using extra cement complete all as specified and as directed.

M & L for applying two coats of OBD including priming with alkali resistant primming paint and prepatation of new surface complete all as specified and as directed.

M & L for applying two coats of colour wash over one coat of white wash on walls including preparation of new surface complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick, PCC 1:2:4, type B0, using 12.50 mm graded aggregate as in sub base of floor complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m in floors, set and jointed in neat cement slurry and pointed in colour cement to match and including laying over 15 mm thick screed bed in CM 1:6 , complete all as directed and as specified .

M & L Non skid caramic coloured tile 7 to 8 mm thick (square/ rectangular ) area of eachtile exceeding .11 sqm but not exceeding .18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M & L Non skid caramic coloured tile 7 to 8 mm thick (square/ rectangular ) area of eachtile exceeding .11 sqm but not exceeding .18 sqm as in skitting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick bedding in layer of CM 1:3 complete all as specified and directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in skirtting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick bedding in layer of CM 1:3 f complete all as specified and directed.

M & L granite work of any type 20mm thick ( of any type) work table rubbed & polished in steps , jambs , pillar, widow cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of in CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified.

M&L Cement Concrete (chequered tiles of size 250 X 250 X 22mm jointed with white cement & pigment and pointed in colour / white cement to match the shade of tile over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and as directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over 15mm thick screed bed or bedding in layer of CM 1:6and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. .

M & L Glazed ceramic coloured tiles in vertical surface 450x300mm x 7mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick screed in cm 1:3 on wall , complete all as specified and as directed.

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

M&L for PCC 75mm thick type C1 1:3:6 (20mm graded aggregate) as in plinth protection laid in panels including finishing the surface feven and smooth without using extra cement complete all as specified and as directed.

M&L in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

S&F hasp & staple 100mm size aluminium anodised fixed with screws. complete all as specified and as directed.

S&F continous (Piano) hinges , mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 Kg/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding as in sunken floor (bottom and vertical) complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L for PCC 1:5:10 type D-2 (using 40 mm graded aggregate) as in filling of sunken portion etc complete all as specified and directed. .

ATUL ENTERPRISES

NEWS CONSTRUCTIONS

MAHALAKSHMI INFRA PROJECTS

VENKATA PRABHAVATHI CONSTRUCTIONS

BEEGEE DESIGN SYSTEMS

PAVAN ENTERPRISES

STANDARD AGENCIES