Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹59.2 LAccepted-AOC SUBHADARSAN PARK NO 3 VEERIYAMPALAYAM KALAPATTI COIMBATORE 641 048 | COIMBATORE | TAMIL NADU | 638459 | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹62.7 L+₹3.5 L (5.98%)Rejected-AOC | L2 | Rejected-AOC REJECT |
Tender Value
₹72 L
EMD Value
₹72,000
Closing Date
26 Feb 2024, 3:00 pmClosed
The Commissioner, Coimbatore Corporation
Big bazaar street, Town hall, Coimbatore-1
Construction of compound wall and providing paver block at knowledge and study center permises at Auddis street in ward no.83, central zone.
2024_MAWS_427322_7
E16/2024
Open Tender
Civil Works
Works
120 days
Coimbatore corporation-
As per the tender condition attached
3 documents required · 3 mandatory
₹0
₹72,000
13 May 2024
19 Feb 2024
27 Feb 2024
19 Feb 2024
26 Feb 2024
19 Feb 2024
Amount
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification
Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as RCC COLUMN FOOTING, PLINTH BEAM, STAIRCASE STEPS etc., in all floors using mild steel sheets of size 90cm X 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarina props at suitable intervals etc., complete complying with standard specfication and as directed.
Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RECTANGULAR COLUMNS, TOP AND BOTTOM SLABS OF BOXING, SILL SLABS, SUN SHADES etc., in all floors using mild steel sheets of 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25mm X 3mm for boarding laid over countrywood joists of size 10cm X 6.50cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete as directed
Reinforced CEMENT CONCRETE 1:1½:3 (One cement one and half sand and three aggregate) using machine crushed / Hand Broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall, at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 (One cement and three sand) and Kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers.
Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
BRICK WORK in cement mortar 1:5 (One cement and five sand) using second class chamber burnt bricks of size 9" x 4½" x 3" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost).
PLASTERING with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications.
Painting with two coats of cement paint (first quality) over a base coat and white cement including cleaning, curing etc complete complying with standard specification
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 12mm thick
Providing steel gate size Mild steel angel 50x50x6mm party iron works for truss straps (18 gauge) MS sheet etc complete as directed by the departmental officers
Providing and laying Road edge Kerb (upto size of 0.45mx0.30mx0.10 thickness), Manufactured by M - 20 grade of concrete by using vibro compaction process with jointless FRP moulds, so as to get shuttering finish, Color & shade as per Architect's approval.
Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
Supplying and filling in foundation and basement and trenches with QUARY DUST FILLING in layers of not more than 10cm thick, well watered, rammed and consolidated complying with standard specification etc., complete.
Supplying and fixing of HI-TECH type of interlocking colour paved block of 80mm thick minimum compressive strength 40N/mm2 in unipaver shape of approved make to be laid in herring bone pattern with approved non-sticking surface in top including curing etc complete complying with standard specification and as directed by the departmental officers.
Supply and fixing pre streesed precast slab in using m 30 grade concrete etc
Supply and Fixing of Diacast brass Letters and Empalams as per direction of departmentel officials,etc
letters
Empalam
Supplying and fixing of Elevation HI-TECH type of interlocking bricks of size 230 mm X 100 MM X 80mm thick minimum compressive strength 40N/mm2 in unipaver shape of approved make to be laid in herring bone pattern with approved non-sticking surface in top including curing etc complete complying with standard specification and as directed by the departmental officers.
Daddoing walls with Glading tiles of sizes 205mm x 100mm x 6mm size
A K CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .