REPAIRS TO CHAJJA, PLASTERING, FLOORS,WATER PIPE LINE,DOOR/WINDOWS AND OTHER CONNECTED B/R RELATED WORK IN RP COLONY AREA UNDER AGE B/R-I (W) AGRA

Amount

Demolition of PCC of any description and in any position not otherwise specially provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with CM 1:3 or PCC 1:2:4 type B0 complete all as specified and directed.

Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in benching, coping , roof kerbs, mud stop etc and similar work including all necessary form work complete.

S&F mild steel joist channel, angle, I sections or tee sections fixed independently with out connecting plates as in water tank plat form, supports for staircase, chajjas etcof grade fe-410-0 & fe 310-0 complete all as specified and directed..

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed.

M&L PCC 1:3:6 C-1 (using 20 mm graded crushed stone aggregate) as in providing, cement concrete in lintels/chajjas upto 1.5m clear span, cills, steps; seismicand other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, bed blocks for fixing hold fasts, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

M&L for brick work with sub class 'B' bricks,old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Dismantling floor ,hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for glazed ceramic coloured tiles joint free of size 300 x 200 x 7 mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar over and including and including 10mm thick rendering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .06 Sqm but not exc 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor and including over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non-skid coloured ceramic jointfree tiles (1st quality/premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles as in floor over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ manufacturers instructions finished fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

Supply only integral water proofing compound complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of average 1mm thick Birla putty on new plastered surfaces complete all as specified and directed.

M&L for applying two coats of cement base paint on wall over a coat of priming paint including preparation of new plastered surfaces,complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new plastered surfaces, complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new plastered surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated plastered or unplastered surfaces including preparation surfaces of walls and applying two coat of distemper oil emulsion over and including a coat of 1mm thick wall care putty complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered surfaces of wall and applying one coat of cement base paint (snowcem) white or tinted complete all as specified and directed.

M&L for preparation of old decorated plastered or un-plastered surface of wall and applying one coat of white wash complete all as specified and as directed.

All as per item No.26 above but one coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old deocrated plastered surfaces and applying one coat of weather proof paint in different tint as in band/strips in narrow width and similer works complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc. brick walls complete all as specified and directed.

S&F in repair 15 mm bore pillar taps copper alloy with capatan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S & F in repairs 15 mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs angle valve in repairs cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union, bore of pipe 15 mm, complete all as specified and directed.

S&F in repairs 15mm concealed stop cock, cast copper alloy, chromium plated fancy type with long shank and cup complete all as specified and directed.

S&F in repairs CP brass shower rose with Or without swivel joints,any size including fixing to steel pipe or union complete all as specified and directed.

S & F in repais Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

S&F in repairs Internal kit including flush handle & float for low level flushing cistern complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed

S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets incl CP pillar tap 15mm bore, complete all as specified and directed. .

S&F in repair waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms) of 32mm bore suitable for wash hand basin complete all as specified and directed.

S&F in repairs 32 mm bore PVC pipe as in waste pipes for sinks & WHBs complete all as specified and directed.

S&F 32 mm dia PVC waste pipe for wash basin /sinks 800mm long complete all as specified and directed. Make Prayag Cat No 327

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall/floor complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S&F in repairs 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair plate rack of 1mm thick stainless steel of size 900x600mm with three shelves complete all as specified and directed.

S&F solid PVC frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening as specified in clause No. 8B.3 at Sl page No. 145 and shown in drawing on sl page No 160 of SSR 2010 respectively and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repair Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed

S&F in repairs mild steel PVC coated drapery rods, 25mm internal diameter including decoratine type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed

M&L for removing of trees of girth not exc 30 cm each from brick/concrete wall/ceiling, digging out roots , filling holes , leveling and finished the surface with PCC 1:2:4 matching with other surfaces complete all as specified and directed.

M&L 18-20mm thick polymer modified mortar (CEMSCRED 'R') over polimer modified primer (CEMSCRED primer) on concrete as in ceiling, beams, chajjas & facia surface etc incl preparation of surface and incl chiseling existing surface as per manufactures instructions complete all as specified and directed. Make: Fairmate/pedilite/Fosroc

Cutting holes into or through brick wall superficial area exc 150 sqcm but n'exc 400 sqcm built in cement mortar and making good in cement mortar 1:3 of cement concrete 1:2:4 type B1 as required complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L Machine cut kota stone slab 20-25 mm thick as in steps/stairs, laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and mirror polishing over and including 15mm thick screed bed in CM ( 1:6) complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as specified and directed.

M&L for providing Precast Cement Concrete louvers and jallies type B0 1:2:4(12.5mm graded aggregate) set in cement mortar 1:4 ,25mm thick (measured solid),incluing all mouldings but excluding frame complete all as specified and directed.

M&L for welding in repairs, length n.exc 2.5 cm and n. exc 6mm complete all as specified and directed.

ditto- but length exc 2.5 cm but n.exc 5.0 cm complete all as specified and directed.

Re-securing or easing and adjusting without taking down shutters of any description area of each leaf n. exc 1.0 sqm each complete all as specified and directed.

ditto- but area of shutter leaf exc 1.0 sqm but n.exc 2.0 Sqm each complete all as specified and directed.

S&F in repair 2nd class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.complete all as specified and directed.

Taking down chowkhat frame (without taking of shutters), area of opening n.exc. 1.5 sqm each complete all as specified and directed.

Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment as follow :- (i) Applying bitumen primer @ 0.40Kg/Sqm (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3.50 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat. (iii) 40mm bore GI pipe for spout pipe length 0.75m complete all as specified and directed.

Lime concrete with brick aggrgate in lime mortar 1:2 as filling in sunken floor as in any situation complete all as specified and directed.

Cement concrete (50mm thick) type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate as in pre-cast slab and manhole/drain covers complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bend to shape as reqd and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No.84 above but 8mm dia complete all as specified and directed.

N.K. ENTERPRISES

M/S Solanki Brothers

VASUNDHARA AND COMPANY