Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹31.7 L
EMD Value
₹63,400
Closing Date
20 Nov 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Corporation Limited
Nitesh Harikantra
Remodeling of UGD and restoration of deteriorated MH and IC of sewerage system of Kadra Colony
KPCL/2024-25/WT/WORK_INDENT2156
KPCL/2024-25/WT/WORK_INDENT2156
Open
Water /sewage treatment tanks
Two Tender Document System(Two Cover)
KPCL Executive Engineer Colony AND RH Office KVP Kadra
11 documents required · 11 mandatory
Work experience: The intending bidder should have satisfactorily completed as a prime contractor in the last five financial years (i,e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24.), any civil construction work to an extent of 50% of the cost of work of value not less than Rs.15.85 lakhs. The work done certificate issued from state / central Government / Government under taking from officers not below the rank of Executive Engineer or equivalent cadre shall be furnished. (Weightage of 10% per year will be given to the cost of completed works of previous years to bring them to the price level of present financial year)
Assessed available tender capacity (AxNx2.5-B) should be greater than the amount put to tender, where, A- Maximum value of works executed in any one year during the last five years (updated to 2024-25) price level taking into account the completed as well as works in progress.N - Number of years prescribed for completion of the works for which tenders are invited for 04 Months (0.33 year).B - Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 04 Months.
Financial turnover: The intending bidder should have achieved in at least two financial years an average annual financial turnover of Rs.31.69 lakhs in the last five financial years i,e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24. Turnover certificate duly certified by the chartered accountant shall be furnished. (Weightage of 10% per year will be given to the financial turnover of previous years to bring them to the price level of present financial year).
Deleted
Deleted
Deleted
Deleted
Deleted
Deleted
Deleted
Deleted
Deleted
GST Registration certificate
Declaration I attached to bid document.
Declaration II attached to bid document.
Declaration III attached to bid document.
Declaration IV attached to bid document
KPWD Class III & above valid registration certificate.
Income tax PAN
Independent PF Code
₹800
₹63,400
5 Nov 2024
5 Nov 2024
22 Nov 2024
19 Nov 2024
Remodeling of UGD and restoration of deteriorated MH and IC of sewerage system of Kadra Colony
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Design, manufacturing, supply, errection, trail running, performance test and commissioning of non clog centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) having specifi...
Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves 80mm dia with Body and cover in Ductile cast iron of grade ...
Providing, Laying and Fixing of GI pipes heavy duty 80mm dia conforming to IS 1239:1990 with latest amendments complete with GI fittings with cuts and threads wherever necessary, including testing for...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...
Dewatering the sewage / storm water by using reqired HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump. Using 5HP pump
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaste...
Providing and fixing SFRC frame and cover (medium duty) conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the op...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approv...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing PVC water stopper of suitable type of 230 mm width and 5 mm thickness for construction joints as per detailed technical specifications and as directed by Engineer-in-charge.
Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW2 Bid UGD.doc
Tender Document • 0.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .