REPAIR TO STEEL AND WOODEN FURNITURE OF GRC, NCC OTA, MH, 414 TA, UNIT 371, SUB AREA AND NCC UNITS, MINOR AND MAJOR UNITS OF KAMPTEE AND NAGPUR UNDER GE KAMPTEE

Amount

LOCKER BED SIDE STEEL (FD-1029):-

Removing of old unserviceable hasp and staple and supply & fixing of new CP Hasp and Staple 75mm long as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable leg of size 600mmx80mmx100mm and supply & fixing of new leg of size 600mmx80mmx100mm made out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per given in drawing and site requirement complete all as specified and directed.

ALMIRAH SMALL STEEL WITH SHELVES (FD-1032) :-

Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. Make:link /Godrej/Standard/Aligarh

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable 3 way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable Base channel of size 485x80x100mm or leg and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per give in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed.

ALMIRAH LARGE STEEL WITH SHELVES (FD-67(M), FD-1031(M), DB-4049):-

Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. Make:link /Godrej/Standard/Aligarh

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable three way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable Base channel of size 485x80x100mm or leg and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made to shape as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

TABLE OFFICE STEEL (CLERK/STEEL) (FD-1004) :-

Removing of old unserviceable legs made of MS conduit/square pipe and supply & fixing new legs made out of MS conduit/square/pipe of size 25mm dia and 1.6mm wall thickness complete all as specified and directed.

Removing of old unserviceable drawers with telescopic channel and lock 6 lever complete and supply & fixing new MS drawers made out of 1mm thick MS sheet with lock of 6 lever, drawer shall run on telescopic channel for which new telescopic channel of appropriate size shall be fixed in the table complete all as specified and directed.

Removing of old unserviceable drawers cabinet shutter and supply & fixing new MS cabinet shutter, shutter made out of 1mm thick MS sheet with groove duly covered with pvc to pull the shutter out complete all as specified and directed

Removing of old unserviceable Pre-laminated particle board top of clerk table and supply & fixinh new Pre-laminated particle board 19mm thick light shade as approved by GE with 6mm thick teak wood beading around the edges of partical board complete all as specified and directed.

Material and labour for welding to broken joints of frame of table complete all as specified and directed,

Supply & fix in repair of hard rubber shoe to the leg of table of standard approved quality complete all as specified and directed.

BOOK CASE STEEL (GLASS DOOR) (FD-1028, FD-237, WDF-2, FD-90(M))

Removing unserviceable MS channel and supply and fixing new MS channel complete including necessary welding and roller all as per drawing and as directed.

Removing unserviceable 3 mm thick plain glass with cleat stopper and S&F new 3 mm plain glass with iron cleat stopper all as per drawing and as directed

Removing unserviceable sliding shutter and supply and fixing new sliding shutter of 1 mm thick MS sheet including glass , lock and two handles all as per drawing as directed.

Removing unserviceable locks and supply and fixing new lock with duplicate keys as per drawing and as directed

Removing unserviceable handles and supply and fix new handles of 100 mm all as per drawing and as directed

Removing unserviceable shelves and supply and fix new shelves of 1 mm thick MS sheet with existing matching colour all as per drawing and as directed

CHAIR VARANDAH (FD-256,359)

Removing of old cane from chair varandah steel (bottom and back) and re-canning with new best quality plastic cane 4mm wide, white colour complete all as specified and directed.

M&L for gas welding to frame of chair varandah including preparation of surface and removing the unwanted welding spot complete all as specified and directed.

S&F in replacement of unserviceable portion of frame of chair varandah with 20mm conduit pipe of wall thickness 1.60mm duly gas welding complete all as specified and directed.

S&F in replacement of hard rubber shoe to the leg of chair varandah of standerd approved quality complete all as specified and directed.

GI PIPE CHARPOY NEWAR INTO GI PIPE PLYTOP (FD-220(M), 227):-

Removing of old unserviceable plytop / newar from GI charpoy and supply & fixing two Nos stiffners made out of MS square pipe size 25mm x 25mm x 1.5mm conforming to IS-2062 of 1999 Grade 'A' (weight of pipe not less than 1.06 kg/mtr). The stiffners shall be welded to the frame of the GI charpoy at equal distance joining the long rail such that they lie parallel to short rails and perpendicular to the long rail.

Removing old unserviceable plywood from charpoy plytop and welding of old broken stiffners pipe and re-fixing plywood in charpoy complete all as specified and directed.

Removing of old unserviceable long rails having both threaded broken end and supply & fixing new long rail made out of GI tubing 32mm bore mediam grade ISI marked including making threaded both ends and fixing as shown on drawing complete all as specified and directed. Make of pipe:-SURYA/SURYA/TATA/JINDAL

Removing of old unserviceable short rails of GI charpoy having both threaded broken ends and supply & fixing new short rails of GI charpoy obtained from Srl Item No 7.30 above, including making threads at the both ends and fixing as shown on drawing complete all as specified and directed.

Removing of old unserviceable leg and supply & fixing new leg made out of short rail of GI charpoy obtanied from Srl item No. 7.40 above, including welding of MS plate at the bottom of leg and making thread other end & fixing in position complete all as specified and shown on drawing.

Removing of old unserviceable GI elbow three way and supply & fixing of new GI elbow three way size 32mm bore with new ISI mark (weight not less than 420 gms each and re-assembling of GI Charpoy after replacement of broken elbow complete all as specified and directed.

Removing old unserviceable check nuts from long rail of GI charpoy and supply & fixing of new check nut of 32mm bore and 10mm wall thick, (Wt not less than gms each) ISI marked and fixing in the same in position complete all as specified and directed.

Supply & fixing new 12mm thick plywood in repairs ISI marked BWR Grade of approximate size 1980mm x 1050mm conforming to IS-303/1989 on top of GI pipe charpoy fixing with 10 Nos new nut, bolt and washer of suitable size after re-tightining of all joints of charpoy all as specified and directed. Make : Kitply/Archid/Greenply/National (Note:- Each corner of plywood should be round shaped).

TABLE BED SIDE (FD/E-6/MAP/15(R))

Removing Old unserviceable top 18 mm thick prelaminated particles board exterior grade and supply & fixing new top including PVC beading all round as per drawing and directed-

Removing old unserviceable sides 18 mm thick prelaminated particle board exterior grade and supply & fixing new sides including PVC beading all round as per drawing and all as directed

Removing old unserviceable top back 18 mm thick prelaminated particle board exterior grade and supply & fixing new top back including PVC beading all round as per drawing and all as directed

Removing old unserviceable drawers and supply & fixing new drawers (including necessary T/W runner ) as per drawing all as directed .

Removing old unserviceable back 6 mm thick plywood and supply & fixing new back 6 mm thick BWR plywood as per drawing and all as directed.

Removing old unserviceable hard rubber shoes of table bed side and supply & fixing in replacement of hard rubber shoes of table bed side all as per drg and as directed.

CHAIR CBA OFFICE STEEL WITH ARMS (FD-75(M))

Dismantling of existing UNSV seat of chair CB office steel with arms and supply and fixing new seat of teak wood duly canning with plastic cane 2mm wide half round providing 3mm wide flat cane border around the seat and french polishing in black Colour on wooden surface all as approved by Engr-in-Charge and as specified and shown in drg canning shall be done in Godrej pattern ( Make- Ajay / Maharastra.)

All as per item Ser No-9.10 above but back.

Dismentling of existing UNSV broken cleats and supply and fixing of new MS flat Iron 25x3mm and 535mm long two Nos by welding all as directed by Engr-in-charge and specified and shown in drg.

Removing of Old/UNSV armrest and supply and fixing new arms rest of seasoned teak wood duly french polish in black colour etc all as approved by Engr-in-Charge and as specified and shown in drg.

Supply and fixing PVC new Plug of approved quality by Engr-in-Charge to chair tubler steel after removing existing UNSV.

TABLE DINING ORs ALUMINIUM TOP (FD-165M)

Removing of old unserviceable plywood, top of table dining ORs and supplying and fixing new 18mm thick commercial plywood top and covered with 1mm thick aluminium sheet complete all as specified & directed and as shown in drg.

M&L for preparation of old/new table dining ORs aluminium top and polishing of high gloss melamine polish of table dining ORs complete all as specified & directed.

REPAIRS TO TABLE OFFICE OFFICER STEEL (FD-1002)

M & L for replacement table top of size 1680mm x 870mm with 18/19 mm thick one side teak faced pre-laminated particle board (exterior grade) with 4 mm thick teak wood edging all round and fixed with screwed with frame all as per drawing & as specified and directed by the Engineer-in-Charge including Taking out old top.

M & L for replacement of top of table office officer steel of size 1800mm x 1200mm with 18/19 mm thick one side teak faced pre-laminated particle board (exterior grade) with 4 mm thick teak wood edging all round and fixed with 40 mm screwed with frame all as per drawing & as specified and directed by the Engineer-in-Charge including Taking out old top.

M & L for replacement damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding including Taking out old drawer all as per shown on drawing & as specified and directed by the Engineer-in-Charge.

M & L for replacement of damaged legs / stiffener by 25 mm square tube of wall thickness 1.6 mm and welding complete including Taking out old Leg / stiffener all as per shown on drawing & as specified and directed by the Engineer-in-Charge.

M & L for replacement of unserviceable lock of drawer with new lock 6 Lever 65 mm long best quality with double lock.

M & L for replacement of hard rubber shoe as per existing.

REPAIRS TO ALMIRAH LARGE STEEL 1/2 SX1/2H (FD-67M & FD-1033)

Taking down old unserviceable locking devise of almirah large steel 1/2SX1/2H and supply and fixing new lock of suitable size provided with duplicate keys as per sample, fixed with screws, all as per drawing & as specified and directed by the Engineer-in-Charge.

M & L for repairing locking device of almirah steel large 1/2SX1/2H including lock bar all as directed by Engr-in-Charge.

M & L for repairing of door shutters by denting and necessary adjustment as required all as directed by Engr-in-Charge.

Taking down old unserviceable handle of almirah large steel 1/2SX1/2H and supply and fixing new chromium plated brass handle, fixed with screws, all as per drawing & as specified and directed by the Engineer-in-Charge.

Taking down old unserviceable legs of almirah large steel and supply and fixing new legs made out of 1 mm thick mild steel black sheet, all as per drawing & as specified and directed by the Engineer-in-Charge.

Taking down old unserviceable shelves of almirah large steel and supply and fixing new shelves made out of 1 mm thick mild steel black sheet made to shape, all as per drawing & as specified and directed by the Engineer-in-Charge.

Taking down old unserviceable hanging aregment of almirah large steel and supply and fixing new Hanging aregment including preparation of surfaces, all as per drawing & as specified and directed by the Engineer-in-Charge.

REPAIRS TO TABLE 3' X 3' STEEL (FD-1009)

M & L for replacement of top of table with 18/19 mm thick one side teak faced pre-laminated particle board (exterior grade) with 4 mm thick teak wood edging all round and fixing with 40 mm screwed with frame all as per drawing & as specified and directed by the Engineer-in-Charge including Taking out old top.

M & L for replacement of UNSV legs by 25 mm square tube of wall thickness 1.6 mm by welding complete all as per shown on drawing & as specified and directed by the Engineer-in-Charge including Taking out old Leg.

M & L for replacement of damaged stiffener and side rail by 25 mm square tube of wall thickness 1.6 mm by welding complete and painting with two coats of Synthetic enamel paint over a coat of red oxide primer all as per shown on drawing & as specified and directed by the Engineer-in-Charge including Taking out old stiffener / side rail.

M & L for replacement of hard rubber shoe as approved.

BED HARD STEEL (FD/E6/MAP/08(R)

Supply and fixing new 18mm thick both sides prelaminated particle board BWR exterior grade confirming to IS in replacement of UNSV 18mm thick both sides pre-laminated particle board of BWR exterior grade confirming to relevant IS shade /colour as approved with PVC edging screwed to MS strip of head board all as per drawing Make : Century/Ecoboard industries ltd/Kitply/National/Associate decor Ltd.

Supply and fixing new 18mm thick both sides prelaminated particle board BWR exterior grade confirming to IS in replacement of UNSV 18mm thick both sides pre-laminated particle board of BWR exterior grade confirming to relevant IS shade /colour as approved with PVC edging screwed to MS strip of foot board all as per drawing Make : Century/Ecoboard industries ltd/Kitply/National/Associate decor Ltd.

Supply and fixing in replacement of 20 mm x45mm of 18 gauge MS Strip with new of same size & thickness (including necessaary Welding) all as per drawing and as directed.

M & L for fixing (only) of long rails (including necessary welding /Nut& bolts) to head board and foot board as direceted.

Supply and fixing in replacement of old unserviceable stiffener with new of size 1974x824 mm (including welding ) made of 25 mm x25mm square MS pipe (18 gauge) all as per drawing and as directed.

Supply and fixing 12 mm tick plywood BWR grade type A ,confirming to IS-303 of 1975 (ISI marked) in replacement of old unserviceable 12 mm thick plywood BWR grade type 'A' confirmimg to IS-303 of 1975 (ISI marked) all s per drawing (Make: Century/National/Greenply)

Supply and fixing in replacement of old unserviceable hard rubber shoes with new of size 38mmx38mm (Inner size) all as per drawing)

M & L for painting to frame of bed hard steel with two coats of synthetic enamel black paints including welding where required and preparation of surfaces all as directed

Chair Revolving steel hydraulic (all type) (TP)

Removing old unserviceable Seat of Revolving (Leather Chair) and supply & fixing New seat of computer chair all as per drawing. Seat shall be made of 50 mm thick synthetic foam of 32 density fixed over 12 mm thick plywood commercial and shall be stitched with superior quality leather of approved as specified and directed.

Removing old unserviceable back of Revolving (Leather chair) and supply & fixing new back of computer chair all as per drawing . Back shall be 25 mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality leather of approved as specified and directed.

Removing old unserviceable leather of (seat and back) from existing Revolving (Leather Chair). S & F of new leather duly approved by GE, shall be used for seat and back of existing chair revolving as specified and directed.

Removing old unserviceable Arms rest of Revolving(Leather Chair) and supply & fixing new arms rest of computer chair all as per drawing and directed.

Removing old unserviceable Revolving wheels of revolving (Leather Chair) and supply & fixing New Revolving Wheel of revolving chair all as per drawing and directed

Removing old unserviceable padestal Assembly and supply & fixing New Steel Padestal Assembly of Revolving (Leather Chair) all as per drawing and directed.

Removing old unserviceable Hydroclic System gas lift (Air soft) and supply & fixing of New Hydrolic System (Air Soft) of Revolving (Leather Chair) all as per drawing and directed.

Charpoy Hard Top (FD/MAP-II/01)

Supply and fixing of stiffener (including welding) made of 25 mm square MS pipe (16 gauge) in replacement of old unserviceable stiffener all as per drawing and as directed.

Supply and fixing of 12 mm thick plywood BWR grade type 'A' of size 1930x850mm confirming to IS -303 of 1975 (ISI marked) in replacement of old unserviceable plywood all as per drawing. Make; Century /National/Greenply)

Supply and fixing of thick hard rubber shoes of size 32 mm square (Inner size) in replacement of unserviceable hard rubber shoe all as per drawing.

M & L for scrapping out old painted (external and internal) surface of following steel furniture and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting including preparation of surfaces and filling cavities with putty as specified and directed :-

Locker steel (TP, FD 1029)

Almirah Small steel all type (FD-67 &FD1032)

Almirah large steel (FD-1031)

Table office clerk steel (FD-1004)

Book Case Steel FD-1028

Chair Verandah ( FD-256 & FD/MAP II/06)

GI PIPE CHARPOY NEWAR INTO GI PIPE PLYTOP (FD-220(M), 227)

TABLE BED SIDE (FD/E-6/MAP/15(R))

Chair CB Steel with Arm (FD-75)

Table dining ORs (FD-165)

Table office Offrs steel (FD-1002)

Almirah large steel 1/2Sx1/2H(FD-1033)

Table 3'x3’ Steel ( FD-1009)

Bed Hard Steel (FD/MAP/08(R))

Charpoy Hard Top (FD/MAP-II/01

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 67972.50]

dhanshree enterprises (BID ID -3319386)

H.M Traders (BID ID -3320133)

Budget Furniture Industries (BID ID -3319154)

NIHAL ENTERPRISES (BID ID -3319821)