REPAIR MAINT TO WOODEN/ ALUMINIUM JOINERY WORK, WALL PENELING AND FLOORING AND CONNECTED ITEMS IN CERTAIN BLDG IN ZONE A ZONE B AND ZONE C AT BHDC UNDER GE (EAST) DELHI CANTT-10

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M & L Glazed ceramic coloured tiles of 600 x 300 x 7mm thick or 450 x350mm size 7-8mm thick in vertical surfacethick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:4 on wall complete in all respect as specified. Colour and pattern approved by EIC). Make :- Somany or equivalent in Kajaria/Johnsion

M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/rectengular) polished, size of each tiles is 600x600mm as in floors, over 15 mm thick screed bed in CM 1:4 and joint shall be kept as 3mm filled with epoxy. to attain the best result 3mm thick tile spacers to be used, Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immendiatly. complete all as specified and directed.

M&L for joint free non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete of item all as directed.

M&L for joint free non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete of item all as directed.

M&L for heavy duty coloured (approved colour) fully vitrified paving tiles of size exc 0.09 but not exc 0.16 sqm ,12mm thick, set and jointed in neat cement slurry and pointed in coloured or white cement to match the shade of tiles over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

Dismantling of Machine pressed precast conctete interlocking paver block any shape, size and thickness for refixing of good paver blocks complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) and disposal of all bldg Materials to out side MOD land as per NGT guide line complete all as specified & directed.

M&L for 75mm PCC type D -2 (1:4:8) using 40 mm graded crushed stone aggregate as in Sub base complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 using 20mm graded stone aggregate as in coping, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates complete all as specified and directed.