REPAIR TO LEAKAGE, SEEPAGE, FLOOR, WALL TILING AND MISCELLANEOUS WORK AT NEW DRDE GWALIOR AND REPAIR TO JOINERY, FALSE CEILING, FLOOR/WALL TILING, SANITARY FITTINGS AND MISC WORKS AT OLD DRDE GWALIOR UNDER GE I RND DELHI

Amount

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 using old size bricks complete all as specified and as directed.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L rendering 15mm thick plaster on concrete/brick masonry surfaces in CM(1:4) finished even and smooth w/o using extra cement complete all as specifiede and directed.

M &L for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:4, including finishing with sagol finish not less than 1mm thick even& smooth without using extra cement complete all as specified and as directed

M&L for rendering 15 mm thick plaster in cement mortar 1:6 on brick walls or concrete surface,finished even and fair without using extra cement. complete all as specified and as directed.

M&L rendering 5 mm thick in cement mortar 1:3 on brick or concrete surfaces in ceiling, finished even and fair without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and appling two coats of cement paint complete all as specified and as directed.

M&L for preparing new plastered surfaces of ceiling and appling two coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over wall care putty of 2mm thick over one coat of primer on walls complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof paint over a coat of primer complete all as specified and as directed.

Demolition of lime concrete in ground floors and pavings exc 15 cm thickness complete all as specified and as directed.

M&L for cement concrete type F2 1:5:10 (40 mm graded aggregate) in filling and mass concrete, complete all as specified and as directed.

M&L for applying evenly two coats of blown type bitumen at the rate of 1.50 kg per square metre each coat complete all as specified and as directed.

M&L for Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50kg per sqm complete all as specified and as directed.

M&L for 25mm bore galvanised steel water tubing medium grade in sunken floor spouts etc including cutting through brick wall and making good complete all as specified and as directed.

M&L for rendering 15mm thick plaster in cement mortar 1:4 mixed with water proofing compound on faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and as directed.

Demolition of cement concrerte of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Removal of existing bituminous felt roof treatment of any description, cleaning the surface and removing the debris out of MoD land complete all as specified and as directed.

M&L for providing, PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in roof kerbs, roof padding, base of tank or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L rendering15 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 and finished even and smooth without using extra cement including mixing of W.P.C. (WPC will be measured & paid seperately) complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M & L for Brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed.

M&L for waterproofing on roof and parapets including flashing and junctions of parapet, kerb, wall etc. as under:- (a) Applying bituminous primer on cleaned and dried surface @ 0.20 Kg/Sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot at the rate of 1.2 kg/sqm. (c) Laying APP based polymeric water proofing membrane (weighing not less than 3 kg/sqm) reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) by theRMo fusion using butane torch with 10 cm longitudinal and 15 cm end overlaps fiRMly bonded and levelled by heating with butane torch. (d) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15 Kg/Sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exceeding 4 sqm each and making good the distrubed surface complete all as specified and as directed.

Taking down shutter of any description not exc 1 sqm each.

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F 30 mm thick solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rails; panelling of plain colour PVC sheet sealed to the stiles and rails with suitable PVC sheet beading, joined together with solvent cement complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt extruded section, 200 mm long complete all as specified and as directed.

S&F Extruded anodised aluminium alloy handles fabricated type 150mm long grip complete all as specified and as directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F 100mm size mild steel butt hinges cold rolled, medium weight complete all as specified and as directed.

S&F 75mm size mild steel butt hinges cold rolled, medium weight complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt extruded section, 100 mm long complete all as specified and as directed.

S&F Extruded anodised aluminium alloy handles fabricated type 150mm long grip complete all as specified and as directed.

S&F Aluminium alloy anodized hooks and eye 150mm size complete all as specified and as directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F Anodised aluminium alloy body door stopper and rubber shoe, overall length of cover plate 140mm complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed in repairs in wooden or metal frames complete all as specified and as directed.

S&F in repair mild steel 300 mm ordinary rat tail rod pattern door spring incl roller & plate including welding on mild steel frames complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4, type B-1 (20mm graded aggregate) as in floors complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces, area of each tile exc 0.08 sqm but not exc 0.16 sqm, 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces, 300x 200x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L for Non - skid joint free ceramic tiles skirting cut out of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for Vitrified ceramic light shade coloured tiles 8 to 10 mm thick, area not exceeding 0.36sqm (square or rectangular) polished, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L for Vitrified ceramic light shade coloured tiles skirting cut out of 8 to 10 mm thick, area not exceeding 0.36sqm (square or rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platefoRMs and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in cement mortor 1:4. complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps and other similar situations complete all as specified and as directed.

Cutting chases in brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Taking up down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up down steel tubing and connections 20mm bore including cleaning for re-fixing or removal from site complete all as specified and as directed.

Fixing only 15mm bore galvanised steel water tubing with all new fittings complete fixed to wall and ceiling or laid in floors complete all as specified and as directed. Note :- Old serviceable pipe retrieved from item srl No. 57 shall be reused.

Fixing only 20mm bore galvanised steel water tubing with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and as directed. Note :- Old serviceable pipe retrieved from item srl No. 58 shall be reused.

S&F 15mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 20mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 250ltr and not exc 500ltr, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500ltr and not exc 1000ltr, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position complete all as specified and as directed.

Dismantling water tanks exc 250 and not exceeding 500 litre capacity complete all as specified and as directed.

Dismantling water tanks exc 500 and not exceeding 1000 litre capacity complete all as specified and as directed.

S&F PVC rotational moulded polythylene water storage tank 500 litre capacity, cylindrical vertical with closed top, hoisted and fixed in position all as specified.

S&F rotational moulded polythylene water storage tank 1000 litre capacity, triple layered cylinendrical vertical with closed top, hoisted and fixed in position all as specified.

S&F in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 142gms) complete all as specified and as directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210gms) complete all as specified and as directed.

S&F in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 455gms) complete all as specified and as directed.

S&F in repairs kitchen sinks made of stainless steel sheet 1.00 mm thick with waste coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel sheet of 1.00 mm thick with wastes coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair 15mm bore chromium plated cast copper alloy sink tap with swan neck type spout with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repair 15mm dia cast copper alloy chromium plated long body fancy type bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15mm dia chromium plated cast copper alloy fancy type pillar taps with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flyuts, screwed for iron pipe complete all as specified and as directed

S&F in repair 15 mm dia chromium plated cast copper alloy stop valves, angle type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs brass chromium plated shower rose with swivel joints, 125mm dia, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs PVC connection 15mm size 450mm long with 2 Nos PTMT end nuts with washer complete all as specified and as directed.

S&F in repair vitreous China wash basin, white, flat back, size 550 x 400mm including CI/MS brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F in repair 32mm waste coupling of PTMT, half or full threaded (minimum weight 45gms) complete all as specified and as directed.

S&F in repairs 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, strached length 90cm with PVC coupling socket complete all as specified and as directed.

S&F in repairs 40mm dia ribbed PVC waste drain pipe for sink, strached length 90cm with PVC coupling socket.

S&F in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white including fixing bolts, connection to drain (or outgoing pipe) and flushing pipe etc complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provn of lean concrete bedding, connections to flushing pipe and making good disturbed portion of floor to match existing surface complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets, PVC flushing pipe inclduing connecting to WC complete all as specified and as directed.

S&F in repair white vitreous china laboratory sink size 450x300x150mm including bedding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe complete all as specified and as directed.

S&F in repair white vitreous china laboratory sink size 600x450x200mm including beding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe complete all as specified and as directed.

S&F in repair 15mm bore chromium plated cast copper alloy three way laboratory cock (deck mount installation type), screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm dia chromium plated cast copper alloy two way stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair PVC lid for PVC water storage tank covers upto 1000 lit capacity complete all as specified and as directed.

S&F in repair acrylic body bath cabinet with single mirror, size 350mmx450mm complete all as specified and as directed.

S&F in repair stainless steel kitchen plate rack of overall size 31" x 36" x 10" complete all as specified and as directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rail 600mm long including brackets complete all as specified and as directed.

S&F in repairs powder coated aluminium alloy drapary (curtain) rod 25mm dia fancy type with and including fixing brackets, end cap studs etc complete all as specified and as directed.

S&F in repair internal fitting of requisite pattern and size for 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description complete all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm in wooden or metal frames complete all as specified and as directed.

S&F 18 mm thick wood plastic composite (WPC) panel fixed in repair with suitable pins, screws and adhessive in cabinets body, shutters and shelves complete all as specified and as directed. .

S&F Mild steel bright finish or electrogalvanised continuous (piano) hinge 40mm width of flaps and fixed to cup board shutters complete all as specified and as directed. .

S&F 40mm dia mild steel bright finished cupboard knobs fixed with nut, screw and washer complete all as specified and as directed.

S&F stainless steel modular cabinet hinges with spring suitable to hold the shutter in open/shut position complete all as specified and as directed. .

S&F stainless steel cabinet handles 75mm size decorative type complete all as specified and as directed.

S&F 35mm size magnetic catches fixed in modular type cabinets with MS plate (bright polished) on shutter complete all as specified and as directed.

S&F 100 mm size aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified and as directed.

S&F in repair chromium plated health faucet with 1 m tube and hanging hook complete all as specified and as directed.

S&F in repairs chromium plated butterfly jet spray for EWC with 1m long brass chromium plated flexible tube provided with end nut and washer complete all as specified and as directed.

Dismantling of cast iron drain pipes and fittings upto 100mm bore, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed. .

S&F 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

S&F 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed. .

Fixing only 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed. .

Fixing only 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed. .

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 75mm bore cast iron bends (any radius), fitted with oval access doors complete all as specified and as directed.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access doors complete all as specified and as directed.

S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access doors complete all as specified and as directed.

S&F Cast iron cowls 100mm bore complete all as specified and as directed.

S&F in repair Cast iron nahani trap 75mm dia of outlet with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Restraining and resecuring 2 strand steel barbed wire fixed to any type of standard rails straining bolts fixed on security wall, including making good staples, tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc. as directed (each line wire to be measured). complete all as specified and as directed.

M&L for Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing in repairs to any type of standard rails, straining bolts on security wall including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc. as directed (each line wire to be measured) complete all as specified and as directed.

Taking down and refixing concertina razor wire coil of any description fixed on security wall with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed.

S & F in repairs on security wall, 450mm dia concertina razor wire 3 clips cross type coil with short blades having barb thickness 0.5 ± 0.05mm, barb length 10.0 ± 1mm, barb width 13 ± 1mm, barb spacing 25 ± 2mm and core wire diameter 2.5 ±0.1mm extended to 6-7 loops per metre complete all as specified and as directed.

Preparing surfaces of old steel and iron swan neck posts etc. fixed on security wall, area excedding 0.1 sqm but not exceeding 0.5 sqm each and treating with tar or coal tar black paint complete all as specified and as directed.

M & L for Post construction Anti TeRMite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Providing and injecting chemical emulsion for Post constructional anti teRMite treatment along external wall below concrete apron using chemical emulsion @2.25 Ltrs/linear metre including drilling and plugging holes etc in apron complete all as specified and as directed. .

Supply and fix Durastrip SBS Bitumen Self Adhesive Bitumen Flashing Tape of Size 1000 cm x 10 cm x 1.6 mm, Silver thickness on roof sheets complete all as specified and as directed.

Dismantling corrugated or plain steel sheeting any gauge,thickness,including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering for flat or arched roof cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any discription not otherwise provided for complete all as specified and as directed.

S&F Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confoRMing to Fe 410 -W (Gde E- 250) quality A as per IS 808(Part V)1976 complete all as specified and as directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, framed and hung as gates, including pintle hinges, stops hand made sliding bolts etc., ladders framed balusters walk ways railings, framework of water tanks and similar work confoRMing to Fe 290 Gde E-165 complete all as specified and as directed.

M&L preparation of new steel surfaces of any descriptions over 10 CM width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed.

M&L for grouting of sunken floor slab with cement slurry by mixing 50 Kg of cement with 18 to 22 litre of water with admixture of FOSROC CEBEX 100 (Plastized expanding grout admixture) about 225 gms per 50 Kg of cement by drilling upto 12mm dia. hole in floor @ 300mm C/C upto required depth and grouting/ pumping the grout with mechanically powered grout mixer upto 10 Kg for each hole as per manufacturer's instructions and sealing the hole after grouting (GROUT= WATER+ CEMENT+ FOSROC CEBEX 100 in proportion) complete all as specified and as directed.

M&L for sealing of floor/wall tile joint with NITOTILE GROUT (Cementing Tile Joint Filler) by unifoRM paste prepared with one part of water to 3 part of powder by volume complete all as per manufacturer's instructions complete all as specified and as directed.

Repairs to low/ high level flushing cistern syphon, washers, handles, float valves, stopping leakage of Down pipe by applying m-seal and other related works or to make the flushing cistern functional complete all as specified and directed. NOTE : Rates quoted by the contractor are deemed to inclusive of necessary tools and plants incl matrials i.e. GI inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia etc required to complete the job.

M&L for repairs to the existing floor trap by demolition of PCC including tiles & screed bed for the floor area of 200x200mm around the floor trap, provision of 110mm dia. PVC (SWR) pipe vertically for the depth of 20 to 30cm from the floor level up to the floor trap embedded in PCC 1:2:4 type B1 and making good with the existing floor finish including proving new squre/ raound as required grating complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar exc. half brick but not exc. one brick in for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 Type B-1 as required and finishing the surface to match with existing complete all as specified and as directed.

S&F Pressed steel frames for doors 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling hollow of frame with plain cement 1:3:6 type C-1 (20mm graded stone aggregate) concrete, supplied and fixed complete all as specified and as directed.

S&F Pressed steel frames for doors 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling hollow of frame with plain cement 1:3:6 type C-1 (20mm graded stone aggregate) concrete, supplied and fixed complete all as specified and as directed.

S&F Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials of any description and girth such as ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each and treated with tar or coal tar black paint complete all as specified and as directed

S&F Mild steel hold fasts confirming to Fe 290 Gde 165 complete all as specified and as directed

M&L Preparing surfaces of small steel or iron articles of any description and girth such as holdfasts etc., area n exc 0.1 sq. m each and treated with tar or coal tar black paint complete all as specified and as directed.

S&F 35mm thick factory made second class hardwood (kiln seasoned and chemically pressure treated) partially panelled and partially glazed or gauged shutters, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (a). complete all as specified and as directed

S&F 35mm thick factory made second class hardwood (kiln seasoned and chemically pressure treated) plain framed panelled shutter (two panel) with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rails and stiles as per IS : 1003 (Part-I) complete all as specified and as directed

S&F 30mm thick factory made second class hardwood (kiln seasoned and chemically pressure treated) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (b) complete all as specified and as directed

M&L Preparing new wood and wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and as directed.

S&F Powder coated aluminium (thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Powder coated aluminium (thickness of powder coating not less than 50 micron) window and ventilator shutters, side or top hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles complete all as specified and as directed.

5.5mm thick sheet glass of any plain or tinted, ordinary quality and glazing with exising snap beading and rubber gasket in aluminium frames complete all as specified and as directed

S&F 18/19 mm thick pre laminated particle board interior grade prelaminated one side with decorative choice lamination provided with 6mm thick (width equal to thickness of board) polished teakwood lipping all around, fixed to timber frame work/ steel frame work as in cup board shutter/ shelves complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3 mm thick sheet glass not exc 0.50 sqm in each pane fixed with wooden beads or putty in wooden or metal frames complete all as specified and as directed.

S&F 3 mm thick figured glass not exc 0.50 sqm in each pane fixed with wooden beads or putty in wooden or metal frames complete all as specified and as directed.

S&F 0.80mm thick plain, galvanised, mild steel sheeting fixed in repairs on crumple joints with screws (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Dismantling leaves of main entrance steel gates of DRDE new campus technical area including roller guide rail/ channel, adjusing height by relocating hinging/ locking arrangement, repairing worn out and corroded parts of gate and guide rail/ channel by welding, refixing the gate and embedding roller guide rail/ channel in cement concrete 1:1½:3 complete all as specified and as directed

Repairing and easing of rolling shutter push and pull (manual type), any size without taking down of rolling shutter but by opening top cover and refixing, cleaning guide channels, replacement of rusted parts by welding, grinding; greasing and oiling etc. for smooth operation and painting both sides and top cover with one coat of synthetic enamel paint after preperation of surface complete all as specified and as directed

Repairing and easing of collapsible gate, any size without taking down, cleaning guide channels, replacement of rusted parts by welding, grinding, greasing and oiling etc. for smooth operation complete all as specified and as directed

M&L for 75mm thick PCC type 1:3:6, C-2 (40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment 30cm x 30cm x 25mm thick, with rubber moulded glossy finished surface, laid in floors over and including 20mm thick cement mortar screed bed in cement mortar 1:6, set jointed and pointed in neat cement slurry complete all as specified and as directed.

Dismantling interlocking paver blocks of any description, laid dry complete all as specified and as directed.

Providing and laying 60mm thick factory made cement concrete M-35 grade paver blocks made by table vibratory method using PU moulds, glossy finish of approved colour, design & pattern, laying by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and as directed.

Laying only 60mm thick paver blocks any description, by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and as directed.

Providing and laying factory made M-25 grade cement concrete kerb stone fixed in position to the required line, level and curvature including necessary earthwork, jointed with cement mortar 1:3, making joints with or without grooves, thickness of joints not more than 5 mm (except at sharp curves) complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp or insulation etc) or insulation boards/ slabs/ blankets, any thickness, including framework of any description complete all as specified and as directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/inteRMediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the inteRMediate channel with connecting clips across the inteRMediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L for PVC coated gypsum ceiling board/ tiles for insulation and acoustic purpose 60x60 cm in size fixed in position complete all as specified and as directed.

Cutting of berms and clearance of rubbish, debris and organic deposits by surface excavation not exceeding 30 cm deep including cutting and uprooting of shrubs and bushes and removing and deposining where directed out of MoD land at a distance not exceeding 1 km complete all as specified and as directed.

S&F 32mm dia waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and as directed.

Taking down PVC soil, waste and rainwater pipes (any size or pattern), including all fittings, shoes, bends etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bends any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed

S&F 110mm bore PVC (SWR) bends provided with access door any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bends provided with access door any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 110mm bore PVC (SWR) branch piece provided with access door, single (single Y) equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 75mm bore PVC (SWR) branch piece provided with access door, single (single Y) equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single (Single T), provided with access door, equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 75mm bore PVC (SWR) junction single (Single T), provided with access door, equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and as directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F PVC (SWR) floor trap plain with grating including skirting with solvent cement 75mm dia of outlet, fixed in repairs complete all as specified and as directed

Taking up down steel tubing and connections 25mm bore including cleaning for re-fixing or removal from site complete all as specified and as directed

Fixing only 25mm bore galvanised steel water tubing with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and as directed

S&F 25mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and as directed

M/s Mahesh Engineering Works

M/S J P ENTERPRISES

ASW ENTERPRISES

M/s Subhash Construction Co.