8635 SPL REPAIR TO BLDG NO 96/01 TO 96/14 (ORS MD ACCN) AT ZOZILA LINE UNDER GE (CENTRAL) PUNE

Amount

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area exc 1.50 Sqm but n-exc 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, minimum 03 nos hinges per shutter, lock strike plate, etc.complete all as specified and directed.

-Ditto- as item no 04 but of size 105x60mm complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C1 (20mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete all as specified and directed.

S&F 30mm thick flush shutters, solid core onstruction, with block board core and plywood face panels, commercial type on both sides, both faces to be covered with 1 mm thick factory pasted decorative face veneer with lipping on exposed parts complete all as specified and directed.

Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters(both face is covered wiith venner with lipping) open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11. The width of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11. complete all as specified and directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2004 Part 11 complete all as specified and directed.

S&F aluminium powder coated frame for doors, windows, ventilators any type including joining cleat for fixing etc complete all as specified and directed

S&F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading locking arrangment, screws etc. and including powder coating complete all as specified and directed.

Supply and fixing 4mm thick sheet glass ordinary quality and glazing fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with screw of stainless steel wire staples.including fillet complete all as specified and directed.

Dismantling structural steel work in?cladding doors, gates but excluding framed truss etc

S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe 410-W Gde-E250 complete all as specified and directed.

S&F portions framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles ,fabricated type.complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed complete all as specified and directed.

S&F 100mm, size stainless steel bright finish butt hinges complete all as specified and directed.

S&F for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorcomplete all as specified and directed.

S & F in repairs aluminium anodised powder coated curtain rails 25mm dia with SS brakcet, knobs, etc complete all as specified and directed.

Supply & fixing Aluminium alloy anodised sliding door bolts with hasp and stapple (bolt type and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long complete all as specified and directed.

M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer.complete all as specified and directed.

M&L preparation of old surfaces of steel of any description over 10cm width or girth not otherwise described over applying one coats of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exc 15 cm thick (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land complete all as specified and directed.

M&L for Plain cement concrete type D-2 1:4:8 using 40mm graded aggregate complete all as specified and directed

Demolition of brick work build in cement morter of any description and removing debrise out side defence land complete all as specified and directed.

M&L for block masonry with solid blocks of precast cement concrete class designation D-5 (1:5:8) (using 20 mm graded stone aggregate) exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish outside MD land complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6) type C2 of 75 mm thick as in plinth protection finished even and smooth without using extra cement use of necessary form work complete all as specified & directed.

Non skid ceramic coloured tiles 600X600, 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20mm thick screed bed of CM 1:6 complete all as specified and directed.

-Ditto- as item no 32 but in skirting over and including 10 mm thick baking coat in CM 1:3 including taking down existing plaster complete all as specified and as directed.

M&L Non–Skid Ceramic Coloured Tiles, size 300x300x7 mm, Laid on floor, over and including 15mm thick screed bed in cement mortar 1:6 Laid and Jointed in Neat Cement Slurry and pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed.

M&L Glazed Ceramic Coloured Tiles, 300X450X7mm to in size, laid on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water including removal of debrise outside MD land complete all as specified and directed.

M&L rendering 15 mm thick on other than fair faces of brick work or stone surfaces in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/ stone surfaces finished even smooth with spong finish complete all as specified and directed.

M&L for preparing new plastered surface of walls and applying two coats of cement based paint over a coat of cement primer of same make complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a thin layer of wall care putty including complete removal of existing treatment of any layer on wall complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a thin layer of wall care putty including complete removal of existing traatment complete all as specified and directed.

M&L for preparing old plastered surface of walls and applying two coat of cement based paint complete all as specified and directed.

Dismantling ceiling/boarding of any description, fixed in any position like ceiling, partition etc with nails including frame work complete all as specified and as directed.

M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling on aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as specified and directed.

Dismantling asbestose cement (Corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick(AZ-150) fixed in any position where directed of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws or fixed with L type of J type hook bolts with one corrugation side lap, bent to shape as per site requirement complete all as specified and as directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick colour as in ridge and straight flashing with grade of zinc coating AZ-150 complete all as specified and as directed.

Taking up or down 15 mm dia steel water tubing and connection including cleaning for refixing or removal to store of complete all as specified and directed.

-Ditto-as item no 48 above but of 20 mm dia complete all as specified and directed.

M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade concealed type complete all as specified and directed.

-Ditto- as above item no 50 but 20mm bore complete all as specified and directed.

Dismantling water tanks exceeding 250 and not exceeding 500 litres capacity and removing to store complete all as specified and directed.

M&L for PVC water tank rotational molded polyethylene water storage tank hoisted & fixed in position ( with closed top) of capacity 500 ltr complete all as specified and directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, with and etc. including making good to floor, complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including flush pipe brackets complete all as specified and directed. Make Jaquar cat part no: JAH-WHT-184NL or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair vitreous china pedestal pattern water closet white with including cast iron 'P' or 'S' trap, matching sheet cover and connection to trap including making good to floor, complete all as specified. Make Jaquar cat part no: CNS-WHT-551 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair 15mm bore chromium plated two way bib cock fancy type complete all as specified and directed.Make Jaguar cat part No FLP-CHR-5041PM or equivalent model in KOHLER and ROCA.

S&F in repair Brass CP wall mixer for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.complete all as specified and directed.Make Jaquar cat part no:FLP-CHR-5281PM or equivalent model in KOHLER and ROCA.

S&F in repair 15mm bore chromium plated bib cock fancy type complete all as specified and directed.. Make Jaquar cat part no:FLP-CHR-5037PM or equivalent model in KOHLER and ROCA.

S&F in repair 15mm bore chromium plated angle cock fancy type complete all as specified and directed..Make Jaquar cat part no:FLP-CHR-5053PM or equivalent model in KOHLER and ROCA.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.Make Jaquar cat part no:OHS-CHR-1989 or equivalent model in KOHLER and ROCA.

S&F in repair PVC connection 15 x 450mm with nut on both side complete all as specified and directed.

S&F in repair 15mm bore chromium plated pillar cock fancy type. complete all as specified and directed. Make Jaquar cat part no:FLP-CHR-5011PM or equivalent model in KOHLER and ROCA.

Supply and fixed in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fixed in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china flat back type wash basin, white of size 550 x 400 mm including brackets complete all as specified and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws as fixed in repairs.complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and directed.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 36"x36"x8" and of approved quality of finish complete all as specified and directed.

S&F in repair 100 mm dia chromium plated grating dooms with or without holes (minimum weight 50 gms) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete all as specified and directed.

ditto as item no 74 above but 75mm bore complete all as specified and directed.

S&F PVC (SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description laid in CM in floors, approns etc including removal of debrise outside MD land complete all as specified and directed.

M&L 18-20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms, steps, vertical wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite and including grinding / champhering of exposed / visible edges complete and ensure best adhesion to surface complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as specified and directed.

S&F in repair 18/19mm thick MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as in shutter / shelves of cup boards complete and edges leeped with 6m thick teak wood lipping strips with nails etc complete all as specified and directed.

S&F in repairs magnetic catcher for cabinet shutters with fixing arrangement complete all as specified and directed by engineer-in-charge

S&F continuous piano hinges 30mm flap mild steel bright finish all as specified and directed by Engineer -in-Charge.

S&F in repairs 50mm dia, knobs fixed with screws complete all as specified and directed.

Taking down of existing Ceilling fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by rewiring and repairs such as capacitor replacement, bearing repalcement and painting, complete as per site requirement complete all as specified and as directed. Note : The quoted rate shall include the rates of spares and rewiring of fan mentioned above.

S&F for fan rod upto 4 feet with clamps to iron channel complete all as specified and directed

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), for Phase and neutral, Single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in PVC casing caping 25mm wide ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core FRLSH cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The quoted rate shall include (I) taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims. (II) Circuit wiring from DB to switch box

(a) One light point controlled by one switch complete all as specified and directed.

(b) two light point controlled by one way switch

(c) One fan point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

(d) One Exhaust fan point controlled by one 5 Amps one way modular switch complete all as specified and directed.

(e) One call bell point controlled by push bottom.

(f) One 5/6 Amp socket controlled by one switch same board complete all as specified.

(g) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

All as per item no. 86 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified.

Supply and fix LED building security light 30 W IP 65 pressure die cast aluminium housing with GI bracket of suitable size complete including clamps , screws etc and dia complete all as specified and directed

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F socket out let 5/ 6 Amps 3 pin modular type incl connection complete all as specified and as directed

S&F modular bell push type single pole one way 5/6 amps incl connection complete all as specified and as directed

S&F of modular rotating step type electronic fan regulator, not less than 80W/240 volts two module incl connection complete all as specified and as directed

S&F of modular socket twin type, 5 pin 6/16 Amps flush type incl connection complete all as specified and as directed

S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F of ding dong call bell incl connection complete all as specified and as directed

S&F ceiling rose, surface, three terminals incl connection complete all as specified and as directed.

Supply and fixing LED tube lights 4 feet fitting 1x 20W, 220V, Ac aluminium body connecting up with flexible copper conductor cable of suitable size from ceilingrose complete.

Supply and fixing aluminium housing LED light fitting 2 feet, 10 watt 220 V AC including connecting up with flexible copper conductor cable of suitable size complete

Supply and fixing round shape 15 watt 220 volts AC recessed type sleek design metal base with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

S&F Sub main wiring with 2 runs of single core, 6 sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS H quality) drawn through PVC casing capping with fitting/accessories, fixed on roof, walls, ceiling etc including 6 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note : Rate includes (i) PVC casing capping and its accessories (ii) Two runs of cable and one run of earth wire of size 6 sqmm and including taking down of old U/S submain

S&F Sub main wiring with 2 runs of single core, 4 sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS H quality) drawn through PVC casing capping with fitting/accessories, fixed on roof, walls, ceiling etc including 4 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note : Rate includes (i) PVC casing cappping and its accessories (ii) Two runs of cable and one run of earth wire of size 4 sqmm and including taking down of old U/S submain

S&F of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed

S&F of MCB SPN DB 4 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed

Supply and fix TPN DB vertical 4 way IP 54 with incoming provision for MCCB as incomer and 3 Phase Outgoing, Double door, 415 V bus bar capacity 200A including taking down with MCBs/MCCBs complete Note: Rate of MCCB 80A 16 KA lcs = 100% icu adjustable thermal magnetic type Shall be considered in the quoted rate

Supply and fix TPN DB vertical 4 way IP 54 with incoming provision for MCCB as incomer and 3 Phase Outgoing, Double door, 415 V bus bar capacity 200A including taking down with MCBs/MCCBs complete Note: Rate of MCCB 63A 16 KAlcs = 100% lcu adjustable thermal magnetic type Shall be considered in the quoted rate

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete. Note : The quoted rate shall include protection pipe and wire upto 7.5 mtr

Supply and fixing amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

(a) SP 5 To 32 AMP

(b) SPN 32 AMP

Supply and fixing TPN 63 A 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning.

Supply, laying and testing cable XLPE , galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5 core

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable/poles etc in soft/loose soil and getting out complete all as specified.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of excavation.

M&L for laying of DWC pipe of 63/65 mm dia for cable complete all as specified and directed.

M & L for Cutting of road/hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified.

Supply and fix modular geyser box with MCB 20A C series 10 KA complete all as specified and directed

M/s Asrani and sons (BID ID -3439674)

Gauri Associates (BID ID -3433613)

Agarwal Agencies (BID ID -3439550)

M/S NAVNEET S MORDE (BID ID -3439418)

DURGA CONSTRUCTION & TRANSPORT (BID ID -3439714)