PROVN OF STORE ROOM, TOILET, CHAIN LINK FENCING AND REPAIR TO ROOF AT MDC, MH, MI ROOM OF NEW CANTT UNDER GE WEST PRAYAGRAJ

Amount

Surface dressing n exc 15 cm deep in soft / loose soil and getting out exceeding 50 Mtr in soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.50m wide and n.exc 1.50m depth for foundation of walls etc n.exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified & directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Excavating in post holes (or similar holes) in soft / loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

M & L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate in foundations, drain, sub base filling and mass concrete complete all as specified and directed.

M & L for cement concrete 1:5:10 type E2 using 40 mm graded aggregate in foundations filling and mass concrete complete all as specified and directed.

M & L for cement concrete PCC 1:3:6 type C2 using 40 mm graded aggregate in foundations filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete with necessary form work complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

M&L for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts with necessary form work complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

M & L for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregates as in beam including necessary formwork complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

M&L for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like with necessary form work complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

M&L for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregate as in chajja and the like with necessary form work complete all as specified and directed. Note:- Reinforcement & formwork to be measured & paid separately under respective item.

M&L for PCC 1:3:6 type C2 using 20mm graded stone aggregate as in surface channels and drains incl necessary from work complete all as specified and directed.

Extra for forming fair finishing drain channel 30 cm inner girth in cement concrete using extra cement incls forms moulds stopped ends etc all as specified and directed

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for mild steel hollow sections conforming to Fe-410 W (Gde E-250) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Mild steel work conforming to Fe 410-0 or Fe 310-0 in posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only chain link fencing of size 100mmx100mm, 4mm dia complete all as specified and directed

M&L for galvanized 2 strand 2.24 mm dia steel barbed wire, barbed with 2mm dia barbs at 75mm (approx.) spacing and straining and fixing to any type of post, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and as shown on the drawing including straining bolts complete all as specified, directed and shown on drawings. Note:-Each line of wire to be measured separately

S&F concertina coil fencing with punched tape concertina coil 600mm dia with existing angle iron Y shaped, horizontal reinforced barbed wire, stud tied with GI staples and GI Clips to retain horizontal, including bolts or GI barbed wire tied to angle iron all complete all as specified and directed

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed complete all as specified and directed.

Demolition of mud in roof, any thickness including plastering and leaping ( where full thickness recovered or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed complete all as specified and directed

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. Note - Average thickness shall not exceed 40mm

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:3 complete all as specified and directed.

M&L for preparation of existing roof surfaces and roof treatment with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100 micron each layer) having SRI of 1 30, tested as per ASTM E 1980 (with Solar Reflectance and Thermal remittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 00 as per IS: 101 (P-7/Sec-3) 1990 having volatile organic compounds less than 50 gm/litre as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25-40 micron thick transparent Nano modified composite cross linking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc.The work will be done under the supervision of the Engineer-in-charge by Graco airless machine. The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by GE. (Make: Dr. fixit, Pidilite, Sika, Star shield) Note :- Roof treatment shall be carried out by the manufacturer in presence of the Engr-in-charge. The manufacturer shall give a guarantee for the performance & durability for 10 years. Tenderer is deemed to quote the rate accordingly.

M&L for Complete removing of existing treatment by scrapping with Asian Paints TruCareWall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour and one coat of acrylic water based exterior grade primer @ 0.9ltr (undiluted) / 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian paints trucare gracoor equivalent having an electric motor of minimum 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface for painting of subsequent quotes and applying water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & color stay technology , excellent dirt pick up resistance of Asian paints Ltd or its equivalent with low VOC less than 50 , Anti Algai properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. allow 6-8 hrs to dry the surface in both the coats of paint with 6 years performance warranty from manufacture and instructions complete all as specified & directed.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and directed.

Use & waste of form work to sides and soffit of floor or roof beams, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and directed.

Use & waste of formwork to soffits of suspended slabs supported on wall and similar work not exceeding 200mm thick or lintel / beam (Horizontal or sloping) complete all as specified and directed

Use & waste of formwork to chajja complete all as specified and as directed

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per sol item No. 35 above but for 5 mm dia & over upto & including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

Demolition of brickwork masonry built in lime or cement mortar including all quiens arches , pillars etc. but including concrete articles complete all as specified and directed.

M & L Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M & L Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed

All as per Srl item No. 38 above but except bricks complete all as specified and directed. Note:- Brick obtained from demolition shall be reused.

Taking down cement plaster on brick wall or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:3 on ceiling of RCC or brick finished fair and even without using extra cement. complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling of RCC or brick finished fair and even without using extra cement. complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints using extra cement etc complete all as specified.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over & including one coat of primer complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or paving's, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor etc complete all as specified & directed.

M&L for 25 mm thick cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in floor and finished even & smooth without using extra cement complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately

S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: Stainless steel butt hinges and necessary stainless steel screws shall be paid separately)

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed blocks for hold fast complete all as specified & directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

M&L for preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet reinforced with MS tube in opening as per specification and shown in drg in SSR Part -II 2010 complete all as specified and directed

S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:) with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F 150 mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 100 mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 200 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 4 mm thick plain sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.

M&L for joint free non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n exc 0.18 Sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) including the screed bed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 80 mm thick M-40 grade factory made vibratory compacted cement concrete rubber moulded interlocking paver block/tiles Coloured any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25 mm thick sand cushion and joints filled with sand complete all as specified and directed.

Disconnecting existing tanks exc 500 & n exc 1000, setting aside (or tanks, setting aside (or lowering if required) for lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

S&F rotational moulded, multilayer three layer white colour HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F rotational moulded, multilayer three layer white colour HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S & F vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white with seat cover closed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed

S&F PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S & F PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified.

S & F PVC connection 600 mm long, 15 mm size with brass chromium plated nuts complete all as specified.

S&F bib taps fancy type with crutch or butter fly handle, chromium plated with screwed down, screwed for iron pipe or for brass ferrule ,15mm bore complete all as specified and directed.

S&F in repair bib taps fancy type with crutch or butter fly handle, chromium plated with screwed down, screwed for iron pipe or for brass ferrule ,15mm bore ( weight of bib tap should not less than 0.575 Kg/Each) complete all as specified and directed.

S&F CP angle stop valve or cock concealed type fancy type of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.

S & F 15mm bore angle valve (weight should not be less than 0.4kg each) CP wall with half turn flange, brass chromium plated fancy type complete all as specified and directed.

S&F in repair vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling (including CP bottle trap)complete all as specified and directed. Make: Hindware cat part No. 10038 or Equivalent make as specified in P.S

S & F center hole basin mixer without popup waste system with 450mm braided hose, brass chromium plated, fancy type with all accessories and fixed complete all as specified and directed. Make: Jaguar Cat Part No. CON-319KNB or Equivalent or Equivalent make as specified in P.S

S & F Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1111SM or equivalent make as specified in P.S

Supply only Water proofing compound complete all as specified and directed

S & F 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1111SM or equivalent as specified in P.S.

S&F vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spreader with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed.

S&F Health faucet including CP flexible pipe 1.00m long with wall hook with all fittings complete all as specified and directed. Make: Jaguar Cat Part No.ALD-565 or Equivalent make as specified in P.S

S&F in repair CP brass toilet paper holder, superior quality complete all as specified and directed. Make: Jaguar Cat Part No.ACN-1151N or Equivalent make as specified in P.S

Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

Taking up or down 25 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

Refixing old 25 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S&F 25 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S&F 50 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S & F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S & F for 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S & F for 50 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified.

S & F in repairs PVC (SWR) floor trap plain with grating incl joining with solvent cement, dia of outlet 110 mm bore complete all as specified and directed.

Taking down plaster from edges of RCC chajja or corners where steel reinforcement coming outs and filling with 15mm thick rendering in CM 1:3 and apply two coats of cement base paint over a coat of primer to match with the existing shade/colour of buildings complete all as specified and directed. Note :- Necessary scaffolding upto two story will be provided by contractor and unit rate will be deemed to include this aspect.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F aluminium sliding door bolt 250 mm long plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed complete all as specified and directed.

S&F 4mm thick E-boards tiles false ceiling with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6 mm thick GI angle powder coated duly plugged @ 600mm center to center along perimeter of wall. (b) 25x25x1.5 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners plugging in RCC slab placed @ 600mm center to center from perimeter of wall. (c) Fixing of 4 mm thick E-boards tiles of size 595 mm x 595 mm of approved texture and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed conceal surfaces complete all as specified and directed. Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.

One light/fan/bell point controlled by one switch

One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane.

All as per sol item No. 119 above but for one 3 pin socket outlet 15 amps, independent, with cables 2.5 sqmm size on independent board 2.5 Sqmm earth wire complete all as specified and directed.

S&F ceiling rose surface type bakelite 65 X 50 mm two / three terminal complete all as specified and directed.

S&F switch piano, flush type 5 amps, single pole, one way 230 volt complete all as specified & directed.

S&F Lamp holder, PVC/ polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

S&F switch socket combination suitable for 3/ 5 pin , 6 Amp, 230 volt complete all as specified & directed.

S&F switch piano, flush type 16 amps, single pole, one way 230 volt complete all as specified & directed.

S&F socket outlet suitable for 3/ 5 pin , 5 Amp, 230 volt complete all as specified & directed.

S&F socket out let 2-in-1, 3 pin, 5/6 & 15/16 amp modular type complete all as specified & directed.

S&F sheet metal enclosure for MCB's 240 volt 8 way single pole and neutral with 200 amps rated bus bar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.

S&F MCB SPN 40/63 Amps 'B' series, breaking capacity 10 KA of rating & making connection complete all as specified and directed.

S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'B' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F in replacement of LED luminaries 600 mm x 600 mm, 36/40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver with suitable size of wire complete including connecting with three core flexible copper conductor cable of suitable size complete all as specified by Engr-in-charge

S & F surface/ wall mounted light fitting in CRCA powder coated white housing with pre wired suitable for single T-8 LED tube along with S&F one no. LED tube in polycarbonate housing of nominal wattage 18/20 watt, lumen output 2100 Lm, colour temp- 6500 Kelvin, size & length G13/T8/4 feet with integral / in built driver having short circuit and surge protection including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

S&F LED 10 W bulk head light fitting luminaries in high pressure die cast aluminium housing Lumen output- 700 Lm, colour temp- 6500 K having ingress protection -IP 65 for dust, water & IK 08 for external impact including LED light driver including connecting with three core flexible copper conductor cable of suitable size complete all as specified.

S&F Exhaust fan 300 mm sweep Metallic body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan including testing complete all as specified and directed.

S&F ceiling fan with down rod, fan connector/ fan hook, 1200mm sweep, 240 V AC, Energy efficient, 5 star rating with 3 Blade and connecting up including provn of three core PVC insulated multi stranded flexible copper conductor cable of size 1.5 sqmm copper wire from ceiling rose to fan of length not less than 0.5 mtr. all as specified & directed.

S&F sheet metal enclosure for MCB's 240 volt 4 way single pole and neutral with 200 amps rated bus bar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.

M&L (in replacement) for 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.

S&F vertical /horizontal water heater storage type, electrically operated of capacity 25 litres, BEE 5 star rated ABS/ steel body and inner tank made with stainless steel duly thermal insulated with 2 KW heating element complete with and including vent pipe , fusible plug, safety valve, earth connector, PVC connections(hot and cold) and electric connection all as specified and directed. Make:- Havells (Cat Part No GHWAMGTWH025 , Veenus (Cat Part No. AUDRA) , Bajaj (Cat part No. MAJ 25GL (New) as approved by GE.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover reinforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 2.0 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified & directed. Note:- Punned thickness shall be measured for payment.

S&F wall mounted flip up with counter weight design stainless steel 304 grade crab bar rails with anti slip Nylon grip - 24 complete all as specified & directed. Make:- Kosmocare or equivalent as approved by GE.

S&F toilet crap bar of SS 304 grade size 16 inch long 25 mm dia including all fixing accessories complete all as specified & directed. Make:- Kosmocare or equivalent as approved by GE.

S&F SS 304 grade stainless steel railing with 40 mm dia and drill, bracing 25 mm dia and baluster dia 65 mm with cap including all fixing accessories complete all as specified & design as directed by Engr-in-charge.

M/S CHANDRIKA PRASAD AND SONS

Minakshi Construction

Channa Brothers and Co.

Hi-Tech Constructions

KHALSA BUILDER