RENOVATION OF CHAMBER OF CHAIRPERSON & MEMBER, CAMPUS DEVELOPMENT, SUPPLY OF FURNITURE AT BSSC OFFICE, PATNA FOR THE YEAR-2026-27.

B.O.Q FOR THE WORK OF- RENOVATION OF CHAMBER OF CHAIRPERSON & MEMBER, CAMPUS DEVELOPMENT, SUPPLY OF FURNITURE AT BSSC OFFICE, PATNA FOR THE YEAR-2026-27.

Sanctioned Amount 28620115 Date of Saling B.O.Q. :

B. O. Q. Amount : Rs. Date of Receiving Tender :

Earnest Money Amount : 572500 Time of completion : Months

Sl. No. SOR. No. Item of Work Unit Campus Dev Total Qty Rate (in Rs.) Amount (in Rs.)

1 0L01 PROVIDING LABOR FOR SITE CLEANING TO DO ALL COMPLETE JOB. AS PER DIRECTION OF E/I. PER NOS. 20 0 20 504.74 10095.00

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. PER M3 384.556 1.982 386.538 287.30 111052.00

3 11.72 Providing designation100A one brick flat soling joints filled with localsand inclubuilding specification and direction of E/l PER M2 1261.958 26.022 1287.98 283.30 364885.00

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) PER M3 126.903 126.903 3998.10 507371.00

5 11.21.1.1 Providing and fixing 10 mm thick acid and / or alkali resistant tiles of approved make and colour using acid and / or alkali resisting mortar bedding, and joints filled with acid and / or alkali resisting cement as+C81per IS : 4457, complete as per the direction of Engineer-in-Charge.Acid and alkali resistant tile. PER M2 1261.958 1261.958 1295.70 1635119.00

6 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, PER M 60.976 60.976 1087.90 66336.00

7 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. PER M2 144.238 144.238 21.70 3130.00

8 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement PER M2 144.238 144.238 203.60 29367.00

9 5.3 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). PER M3 7.08 5.091 12.171 5335.90 64943.00

10 5.9.5 Centring and shuttering including strutting,propping etc. and removal of form for.Lintels, beams, plinth bams, griders, bressumers and contilevers. PER M2 92.937 92.937 404.70 37612.00

11 5.22.7A Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars TMTC-500-8mm dia. PER KG 531 183.273 714.273 94.50 67499.00

5.227B Thermo-Mechanically Treated bars TMTC-500-10mm dia. PER KG 274.909 274.909 92.60 25457.00

6.1.12/1 Brick work with bricks of class designation 100A in foundation and plinths in Cement ,Mortar 1:4 (1 cement:4 coarse sand) PER M3 23.03 23.03 5017.90 115562.00

12 18.37.1 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside)with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 100A PER NOS. 15 3 18 6849.90 123298.00

13 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110 mm diameter. PER M 130 40 170 257.50 43775.00

14 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

15 12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete.110 mm PER NOS. 110 20 180 182.72 32890.00

16 14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement :4 fine Sand) PER M2 173.954 173.954 237.20 41262.00

17 13.74 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete PER M2 773.954 773.954 7.70 5959.00

18 13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete PER M2 2239.04 2239.04 9.70 21719.00

19 13.80A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. PER M2 903.897 903.897 81.10 73306.00

20 14.66.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade.Old work (one or more coats).Applying one coat of cement primer of approved brand and manufacture on wall surface.Cement primer. PER M2 773.954 773.954 81.70 63232.00

21 13.77.3+ 13.78.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade.Old work (one or more coats).Applying one coat of cement primer of approved brand and manufacture on wall surface.Distemper primer PER M2 2239.04 2239.04 71.90 160987.00

22 13.82.3+4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade.Old steel work (one or more coats).Old wood work (one more coats) PER M2 269.36 269.36 54.10 14572.00

23 14.5.1 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty.Float glass panes of thickness 5.5 mm PER M2 20 20 723.80 14476.00

26 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. PER M2 7.987 7.987 1775.30 14179.00

27 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All Kinds of soil PER M 79.298 79.298 360.70 28603.00

33 5.9.20 Centring and shuttering including strutting,propping etc. and removal of form for.Suspended floors, roofs, landings, balconies and access platform with water proofply 12 mm thick. PER M2 25.39 25.39 544.60 13827.00

34 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement. PER M2 122.156 122.156 203.60 24871.00

39 N/S SUPPLYING, FITTING AND FIXING 150 MM DIA P.V.C. PIPE OF APPROVED BRAND AND QUALITY TO.DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER M 20 20 960.00 19200.00 19200.00

40 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.Size of Tile 60x60 cm PER M2 172.545 172.545 1638.80 282767.00

41 14.28.2 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter. PER M 100 100 351.70 35170.00

42 N/S REMOVING OLD TERFELT AND DISPOSEL OF GARBAGE ETC. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER M2 723.048 723.048 6.40 4628.00 4628.00 531 183.273 714.273

43 13.13.1+13.36.5 20 mm cement plaster of mix.1: 3(1 cement: 3 coarse sand).Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: PER M2 723.048 723.048 240.40 173821.00

44 22.20.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.3 mm thick. PER M2 723.048 723.048 472.50 341640.00

45 9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Local wood PER M3 0.286 0.286 54628.90 15624.00

46 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including stainless steel butt hinges with necessary screws PER M2 4.44 4.44 2845.60 12634.00

47 15.23.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and upto 40 mm PER M2 632.0745 632.0745 47.50 30024.00

48 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottlegreen, blackof any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Motar 1:3( 1cement: 3 coarse sand )and jointing with grey cement slurry @3.3kg per sqm including pointing PER M2 492.96 492.96 795.00 391907.00

49 11.39 Providing and laying Ceramic glazed floor tiles 300 x300 mm (thickness to be specified by the manufacturer ) of1st quality conforming to IS : 13755 of NITCO, ORIENT, SOMANY ,KAJARIA or equivalent make in colours such as white, Ivory ,Grey ,Fume ,Red ,Brown , laidon 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the jointswithwhite cement andmatching pigments etc, complete. PER M2 139.1105948 139.11 1329.80 184989.00

50 9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. PER NOS. 25 25 108.10 2703.00

51 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete PER NOS. 12 12 979.50 11754.00

52 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete PER NOS. 12 12 733.10 8797.00

53 9.92.1 Providing and fixing chromium plated brass handles with necessary screws etc. complete.125 MM PER NOS. 10 10 223.50 2235.00

54 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete.300x16 mm. PER NOS. 10 10 235.50 2355.00

55 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.1 15 mm nominal outer dia Pipes. PER M 65 65 151.40 9841.00

18.9.2 20 mm nominal outer dia Pipes. PER M 79 79 205.30 16219.00

18.9.3 25 mm nominal outer dia Pipes. PER M 145 145 294.70 42732.00

56 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. Per Nos. 5.00 5 4470.90 22355.00

57 17.28.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe.32 mm dia PER NOS. 8.00 8 91.00 728.00

58 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid. PER NOS. 10.0 10 5504.30 55043.00

59 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end).

18.19.1.1 Horizontal PER NOS. 8.0 8 506.60 4053.00

60 18.21. Providing and fixing uplasticised PVC connection pipe with brass ions :

18.21.1.1 30 cm length.15 mm nominal bore PER NOS. 20 20 74.80 1496.00

18.21.1.2 45 cm length. 15 mm nominal bore PER NOS. 20 20 81.50 1630.00

62 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : PER NOS. 20 20 434.20 8684.00

63 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore. PER NOS. 20 20 715.10 14302.00

64 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore. PER NOS. 20 20 708.40 14168.00

65 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore. PER NOS. 22 22 594.80 13086.00

66 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks PER NOS. 25 25 198.50 4963.00

67 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge

18.7.1 15 mm nominal outer dia Pipes PER M 25 25 172.00 4300.00

18.7.2 20 mm nominal outer dia Pipes PER M 45 45 233.90 10526.00

68 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. PER NOS. 20 20 2764.40 55288.00

69 CARRIAGE OF MATERIALS.

70 EXTRA COST OF MATERIALS

71 RATE APPROVED BY S.E. SBC, PATNA SUPPLYING, FITTING AND FIXING MODULAR FULL HEIGHT PARTITION TITLE BASED SYSTEM MADE OF ALUMINIUM EXTRUSION DULLY POWDER COATED WITH 40 TO 60 MICRON OF YOUR COLOUR CHOICE. THE FRAME IS FIXED WITH THE CHOICE OF PRE-LAMINATED PARTICLE BOARD, FABRIC BOARD, MAGNETIC BOARD & WHITE BOARD.DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER M2 17040.918 17040.918 885.00 15081212.00 15081212.00

72 12.52X.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. PER M2 748.115 748.115 1706.60 1276733.00

73 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). PER M2 30.878 30.878 5143.00 158806.00

74 9.3.2 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position.Kiln seasoned and chemically treated hollock wood. PER M3 0.758 0.758 58540.10 44373.00

75 RATE APPROVED BY S.E. SBC, PATNA P/F DOUBLE SKIN LAMINATED BOTH SIDE PARTITION UP TO SPECIFIED HEIGHT WITH 1 MM MICA OF GREEN PLY OOR EQUAVALIENT ETC. DO ALL COMPLET JOB AS PER DIRECTION OF E/I. PER M2 861.425 861.425 750.00 646069.00 646069.00

76 RATE APPROVED BY S.E. SBC, PATNA WORK STATION SIZE (1200X600X1200)MM 67 MM THICK SLIDING TILE BASED PARTITION. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 16.000 16 27295.00 436720.00 436720.00

77 RATE APPROVED BY S.E. SBC, PATNA MEDIUM BACK CHAIR SIZE (W) MM X (D) 670 MM X H(1110MM) 1ST CLASSIC ALL BLACK LOOK WITH SOFT BLACK FABRICUPHTSTERY MAKS.DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 25.000 25 18500.00 462500.00 462500.00

78 RATE APPROVED BY S.E. SBC, PATNA OFFICE TABLE WITH UNIT TABLE SIZE (W) 1800 MM X(D) 1690 MM X(H) 760 MM TABLE TOP THICKNESS 80 MM OUR DANBURG OFFICE COLLECTION IS A STUDDY IN BLEDING WITH PRACTICAL DESIGN. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 10.000 10 65276.00 652760.00 652760.00

79 RATE APPROVED BY S.E. SBC, PATNA VISITOR CHAIR, CHAIR SIZE (W) 590 MM X(D) 490 MM X(H) 980 MM ITS MOULDED SEAT AND INTERNAL BACK PROVIDED. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 22.000 22 15000.00 330000.00 330000.00

80 RATE APPROVED BY S.E. SBC, PATNA SUPPLYING, FITTING AND FIXING HIGH BACK CHAIR WITH REMOVING OF DRAIN USHA CERCUS ETC. E/E (SEAT 510X480. BACK 660X570 HEIGHT MIN. 470 MM ANAX. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 14.000 14 35960.00 503440.00 503440.00

81 RATE APPROVED BY CHIEF ENGG. (NORTH) THREE SEATER SOFA OF SIZE 1810X800X850X425 COMPANY SHOULD BE BIPMA GREEN. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 4.000 4 25385.00 101540.00 101540.00

82 RATE APPROVED BY CHIEF ENGG. (NORTH) ADMIRE OF SIZE 1981X916X486 MM MULTI BEND CONSTRUCTION AND INTER LOCKING DESIGN AND FULL LENGTH OVER APPLYING DOOR AND SIDES. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 20.000 20 30576.00 611520.00 611520.00

83 RATE APPROVED BY CHIEF ENGG. (NORTH) MID BACK CHAIR THE SEAT AND BACK ARE MADE UP OF 1-2 CM THICK HAT PRESSED PLYWOOD. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 24.000 24 12762.00 306288.00 306288.00

84 RATE APPROVED BY CHIEF ENGG. (NORTH) CENTER TABLE OF SIZE 1200WX600DX378 H BUILT WITH THE EXTREMELY DURABLE RUBBER WOOD THE TABLE CAN HOLD WEIGHT UPTO 25 KG WITH VERY SUITABLE COPPUCCION COLOR. THE TABLE WILL BE. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 4.000 4 12879.00 51516.00 51516.00

85 RATE APPROVED BY CHIEF ENGG. (NORTH) PENTA WORKSTATIONS EXPRESS OFFICE OF SIZE 1500X1500X 600X1200MM H WITH PEDESTAL+KBPT+CPU TRDLY. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 10.000 10 95165.00 951650.00 951650.00

86 RATE APPROVED BY CHIEF ENGG. (NORTH) TABLE MODEL TRIDENT MIDDLE MAIN DESK WITH ERW SIZE 1650X700X743 (MAIN DESK) 1000X450X743 (ERU) UNDER STRUCTURE. DO ALL COMPLETE JOB AS PER DIRECTION OF E/I. PER NOS 6.000 6 60198.00 361188.00 361188.00

TOTAL N/S ITEM COST TOTAL RS. 20501031.00

TOTAL SCHEDULE ITEM COST TOTAL RS. 7847291.00

Applying 0.982 7706039.76

EXECUTIVE ENGINEER,

PATNA WEST BUILDING DIVISION,

DANAPUR, PATNA.