Construction of various residence in the campus of SDO (C) complex at Kalayat in Kaithal District (Hon ble CM Announcement Code No. 13764 dated 03.08.2016) (Pdg. Street Light, Campus Lighting in SDM Residence etc.)

Amount

HSR Items

23.5 Coppper Wiring in existing PVC / MS Conduit Pipe Surface / Recessed

23.5.6 Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated copper conductor cable 1100 volts grade in existing MS / PVC conduit etc. as required

23.5.6.1 1 Run of Size 1.50 Sqmm (1/1.40 mm)

23.22 MCCB, Distribution Boards, MCB's, RCCB's, Change Over etc.

23.22.1 Supply and erection of moulded case circuit breakers single pole / 4 pole on existing wall /pedestal/Panel including bonding to earth and making necessary connections required to complete the job in all respect upto the entire satisfation of the Engineer-in-Charge of the work.

23.22.1.3 Triple Pole MCCB 16 Amp. to 100 Amp., 25 Ka

23.22.3 Supply and erection of Sheet steel enclosures 1pole/2 pole/4 pole on wall/on existing pedestal complete as required.

23.22.3.3 TPN Enclosures suitable for single pole MCB

23.22.5 Supply and erection of miniature circuit breaker 240/415 V in the existing distribution board including making necessary connections.

23.22.5.1 6 Amp. to 32 Amp. Single Pole

23.22.5.5 6 Amp. to 32 Amp. Triple Pole

24.1 Earthing and Lightening Arrestor

24.1.1 Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. (but without charcoal or coke and salt) as required .

24.1.2 Extra for using salt and charcoal / coke for pipe earth electrode as required.

24.1.11 Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required.

24.4.8 Supply and erection of Hot Dip Galvanized octagonal pole of 3 mm thickness with base plate including cost of nut and bolts, earthing studs integral cable termination arrangement 5 mm thick bakelite base plate on suitable welded MS/GI bracket 32 amp 4 way connector 2 nos. 10 Amp SP MCB, end cover and all accessories as supplied by the manufacturer including providing RCC foundation of M25 grade (1 Cement: 1 Stone Aggregate: 2 Coarse sand) i/c exacavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respect and nas per direction of Engineer-in-Charge. Make: GE/PHILIPS/VIPIN ST/SKIPPER

24.4.8.5 7 metre long pole with top dia 75 mm and bottom dia 150 mm with base plate os size 300 x 300 x20 mm.

24.4.16 Supply and erection of weather proof M.S. box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S. sheet hinged cover, locking arrangement, housed in wall, including the cost of 1 no. 16 amp. 415 volts SP MCB and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board/10 mm Bakellite sheet in the M.S. box including painting and necessary connections..

24.5.2 S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2, laid 0.75 metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfactuion of the Engineer-inCharge of the work.

24.5.2.3 DWC /HDPE pipe 63/50 mm outer dia / inner dia.

M.R. Items

N.S-1 Supply and Erection of LED street light lumanaries of Havells make Endura PLEARL NEOSL 60W LED or its equivalent specifications of Crompton/WIPRO/Bajaj/Phillips make with die cast housing, toughened glass IP66 with all acessories as supplied by the manufacturer with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work.

N.S-2 Supply & Erection of LED flood light fitting of Havels make JETA PRO FL 70W LED 757 LTG or its equivalent specifications of Philips/WIPRO/Bajaj/Crompton make with pressure die cast alluminium housing, reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

N.S-3 Supply & Erection of bracket made of 40mm dia G l pipe B class lSl 1.25mtr. Long with coller pipe (Gl) 75mm dia 60 cm Long top covered with ornamental cap duly welded painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work.

i) Single Arm Bracket

ii) Double Arm Bracket

N.S-4 Supply & Erection of Underground cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work

i) 10 Sqmm. 4 Core cable (Armoured)

ii) 16 Sqmm. 4 Core cable (Armoured)

N.S-5 Supply and Erection of Post Top lantern Havells make RUBY PT 35 W or its equivalent specification of Philips/Crompton/WIPRO/Bajaj Make with all other accessories as supplied by the manufacturer. The fitting duly fitted on gate / pole / piller with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

N.S-6 Supply and Erection of Crompton Make, Model: LBLSN-10-CDL inverted Pyramid Tripod type LED Bollard with soft 360 degree light distribution with all accessories or its equivalent specifications of Philips / Bajaj / Havells / WIPRO/Bajaj as supplied by the manufacturer including the cost of C.C. platform of size 300 x 300 x 450 mm deep for fixing the pole as per requirement and pipe for incoming and outgoing cable including the cost of 3 Nos. nuts and bolts of suitable size with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

N.S-7 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. (Based on old HSR 31.48)

N.S-8 Supply and erection of MS stand made of 50mmx50mmx6mm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below ground level including the cost of cement sand, welding, painting & fabrication charges etc. up to the entire satisfaction of Engineer - in - charge of the work. (Based on old HSR 31.51)