Procurement of Rubber suction hose pipe for fuel oil pump House for CHD-I DTPS, HTPS, Kasimpur Aligarh

Rubber suction Hose pipe for unloading of FO/LDO from BTPN rake of railway at 80ºC temperature reinforced with two layers of galvanized steel wire and three layers of flexible fabric structure for 8Kg/cm2 hydraulic pressure. Techanical Specification- a. Inner dia- 100mm b. Length of hose pipe (including flanges)-12 mtr c. Flanges Dimensions- OD- 250mm ID- 100mm PCD -200mm No. Of holes- 06 Nos. Dia of flange hole- 18mm Material of flange- M.S. Material- Neoprene rubber

Rubber Gasket for 250NB pipe sleeve joint coupling, OD 310mm, ID 274mm, width 33mm, wedge shaped thickness 14mm to 04mm, circular linings in the inner portion of the gasket (as per sample), heat resistant upto 300deg. C MOC- Silicon Rubber

V-belt 4000C Fenner Make

V-belt 4750C Fenner Make

V-belt 1732C Fenner Make

Square rubber gasket for dummy hole of ESP, Outer LxB: 125x125mm, Inner LxB: 100x100mm, Thickness 05mm (as per sample), Heat resistant upto 300deg C MOC- Silicon Rubber MOC- Silicon Rubber

Rubber sheet 5mm, 1x2 sq. M MOC- Neoprene Rubber

Rubber sheet 3mm, 1x2 sq. M MOC- Neoprene Rubber

Neoprene Rubber Chord 8.00 mm MOC- Neoprene Rubber

Neoprene Rubber Chord 10.00 mm MOC- Neoprene Rubber

Supply of champion style-1100/EquivqlentSpitman/Paccman lubricated and graphite cover on cover braided asbestos Gland packing- Non metallic to withstand temp. 325 deg C to confirm IS-4687/1995 Type-II (in Kg), Size 16 Sq. mm. Make-Champion/Spitman/Paccman

Supply of champion style-1100/ Equivqlent Spitman/Paccman lubricated and graphite cover on cover braided asbestos Gland packing- Non metallic to withstand temp. 325 deg C to confirm IS-4687/1995 Type-II (in Kg), Size 20 Sq. mm. Make-Champion/Spitman/Paccman

Supply of champion style-54/Equivalent Spitman/Paccman super non-metallic compressed asbestos fibre jointing sheet to withstand temp. 550 deg C. And pressure 150 Kg/sq. Cm to confirm IS-2712/1998, grade W/I, standard size 2000mm x 1500mm ±10%, Size 5 mm Make-Champion/Spitman/Paccman

Supply of champion style-54/Equivalent Spitman/Paccman super non-metallic compressed asbestos fibre jointing sheet to withstand temp. 550 deg C. And pressure 150 Kg/sq. Cm to confirm IS-2712/1998, grade W/I, standard size 2000mm x 1500mm ±10%, Size 3 mm Make-Champion/Spitman/Paccman

Supply of champion style-54/ Equivqlent Spitman/Paccman super non-metallic compressed asbestos fibre jointing sheet to withstand temp. 550 deg C. And pressure 150 Kg/sq. Cm to confirm IS-2712/1998, grade W/I, standard size 2000mm x 1500mm ±10%, Size 2 mm Make-Champion/Spitman/Paccman

Supply of champion style-54/ Equivqlent Spitman/Paccman super non-metallic compressed asbestos fibre jointing sheet to withstand temp. 550 deg C. And pressure 150 Kg/sq. Cm to confirm IS-2712/1998, grade W/I, standard size 2000mm x 1500mm ±10%, Size 1 mm Make-Champion/Spitman/Paccman

Supply of champion style-54/ Equivqlent Spitman/Paccman super non-metallic compressed asbestos fibre jointing sheet to withstand temp. 550 deg C. And pressure 150 Kg/sq. Cm to confirm IS-2712/1998, grade W/I, standard size 2000mm x 1500mm ±10%, Size 0.5 mm Make-Champion/Spitman/Paccman

High pressure hose pipe SAE 100, 2.5 inch ID. Working pressure 69 bar/1000 psi, one side 90 degree bend flange size 84 mm, other side straight flange size 84 mm with O-ring groove 68x5 mm, length 13 mtrs. Required for wagon tippler. Make- Parker/Superseal

High pressure hose pipe ID 1.5 inch. Working pressure 1300 psi, threaded swivel type adapter with thread size 52x2 mm, pitch both side, length 13 mtrs. Required for wagon tippler. Make- Parker/Superseal

High pressure hose pipe ID 25 mm. Working pressure 2400 psi, threaded swivel type adapter with thread size 36x2 mm, pitch both side, length 13 mtrs. Required for wagon tippler. Make- Parker/Superseal

V-Belt SPB 1900 Make- ESCON/Fenner/Equivalent

V-Belt SPC 4000 Make- ESCON/Fenner/Equivalent

V-Belt SPB 5300 Make- ESCON/Fenner/Equivalent

V-Belt SPA 3550 Make- ESCON/Fenner/Equivalent

V-Belt SPC 3550 Make- ESCON/Fenner/Equivalent

V-Belt SPC 5600 Make- ESCON/Fenner/Equivalent

HEX HD SCREW M6X16 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD SCREW M 10X25 WITH NUT AND WASHER MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD SCREW M20X80 , WITH NUT AND WASHER MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD SCREW M20X70 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD SCREW M 12X30 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX NUT M20 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW CAP SOC M20X75 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW CAP SOC M20X60 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX SCREW M 10X70 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SOC HD CAP SCREW M24X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SOC HD CAP SCREW M22X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD HT BOLT (HALF THREADED) M18X100 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD HT BOLT( HALF THREADED) M20X100 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX M33X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX M36X100 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX M36X180 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SOC HD CAP SCREW M12X40 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX M36X110 MOC-HT,Grade not less than 8.8,60 make-LPS/TVS/UNBRAKO

SPRING WASHER DIA 36 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HDM 12X120 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

BOLTS, HALF FINE THREADED (1MM PITCH) M18X100 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX P M 16X50 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M16X80 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M12X40 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M12X120 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M10X80 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M16X60 MOC-HT,Grade not less than 8.8,

SS NUT M16 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

Allen Bolt, quarter thread M10X200 required for clamping cylinder head Make- TVS/Unbrako

HT Coupling Bolts, with bush and nut, size M16X80 required for apron gear box Make- TVS/Unbrako

HT Hex Bolt, 10.9 Grade, Half Threaded along with Nylock nut M16X70 required for clamping pad, section gear and cylinder guard Make- TVS/Unbrako

Hex Nylock nuts M-16 required for section gear Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded along with matching nuts M24X120 required for apron foundation bolt Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X80 required for apron gear box coupling Make- TVS/Unbrako

HT 8.9 Grade Bolts, Full threaded along with matching nuts M10X70 required for tippler stand Make- TVS/Unbrako

HT 8.9 Grade bolts, Half threaded along with matching nuts M16X100 required for support of rubber pad Make- TVS/Unbrako

HT 8.9 Grade bolts, Half threaded along with matching nuts M16X40 required for servo motor of tippling Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M40X320 required for main housing of tippler Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M30X150 required for coupler of SAC boom and rack & pinion Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X200 required for SAC rail fixing Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M30X200 required for apron hausing base Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X70 required for guide roller fixing Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X180 required for apron hausing Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X130 required for apron foundation Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X130 required for apron foundation Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X100 required for tippler support beam Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X70 required for rack pinion of side arm charger and plateform locking Make- TVS/Unbrako

Indian Machine Tools