Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-AOC 150 TUNDA MARG JOHRIPUR DELHI 110094 | DELHI | NORTH EAST DELHI | DELHI | 110094 | ₹4.4 L | L1 | Accepted-AOC Lower rates as compared to other bidders |
| 2 | L2₹4.4 LRejected-Finance DELHI | ₹4.4 L | L2 | Rejected-Finance Higher rates as compared to L1 |
| 3 | L3₹4.4 LRejected-Finance | ₹4.4 L | L3 | Rejected-Finance Higher rates as compared to L1 |
| Sl No | Description | Qty | Unit | KAPIL SARASWAT L3 | RD ENTERPRISES L1 | sai sharadha agency L2 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 3 | cum | 16,800 ₹19,824 | 16,800 ₹19,824 | 18,000 ₹21,240 |
| 2.00 | Dismantling of brickwork/RCC by hydraulic or mechanical means including disposal of unserviceable material within 50 m lead as per direction of engineer in charge. | 2 | cum | 1,600 ₹1,888 | 3,050 ₹3,599 | 1,600 ₹1,888 |
| 3.00 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) | 2 | cum | 12,400 ₹14,632 | 13,700 ₹16,166 | 13,000 ₹15,340 |
| 4.00 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | 20 | sqm | 4,300 ₹5,074 | 6,600 ₹7,788 | 5,000 ₹5,900 |
| 5.00 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) | 20 | sqm | 4,300 ₹5,074 | 7,200 ₹8,496 | 5,000 ₹5,900 |
| 6.00 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., Glazed Vitrified high gloss/Anti-skid tile size as specified by engineer in charge | 50 | sqm | 65,000 ₹76,700 | 51,250 ₹60,475 | 65,000 ₹76,700 |
| 7.00 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | 25 | sqm | 4,000 ₹4,720 | 2,125 ₹2,507.50 | 1,375 ₹1,622.50 |
| 8.00 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 25 | sqm | 3,250 ₹3,835 | 2,125 ₹2,507.50 | 1,500 ₹1,770 |
| 9.00 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the sides of wall with suitable arrangement as per approval of engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 220 | kg | 1,21,000 ₹1.4 L | 70,400 ₹83,072 | 90,200 ₹1.1 L |
| 10.00 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.), trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc., size as specified by engineer. | 300 | kg | 48,000 ₹56,640 | 30,600 ₹36,108 | 30,000 ₹35,400 |
Tender Value
₹5.3 L
EMD Value
₹10,522
Closing Date
21 Jan 2026, 3:15 pmClosed
Principal
Rajdhani College Raja Garden
Construction of Open Terrace over the Canteen roof adjacent to staffroom
2025_DU_892033_1
RC/RG/BUILDING/TERRACE
Open Tender
Civil Works - Buildings
Rajdhani College Raja Garden
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Principal Rajdhani college
₹10,522
Yes
21 May 2026
31 Dec 2025
22 Jan 2026
31 Dec 2025
21 Jan 2026
31 Dec 2025
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Dismantling of brickwork/RCC by hydraulic or mechanical means including disposal of unserviceable material within 50 m lead as per direction of engineer in charge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., Glazed Vitrified high gloss/Anti-skid tile size as specified by engineer in charge
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the sides of wall with suitable arrangement as per approval of engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
Steel work in built up tubular (round, square or rectangular hollow tubes etc.), trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc., size as specified by engineer.
Providing and fixing bolts including fasteners, nuts and washers complete.Note: plates of different size also including
Providing and fixing polycarbonate sheet of thickness 5mm design and shade as specified by the engineer in charge.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 65 x 125 mm
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) . 30 mm thick
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
Shifting of 1.5 ton AC outdoor unit and mounted it over steel framed structure including necessary fitting and fixing as required complete. (note copper pipe shall be paid separately)
Providing and fixing 75mm PVC drain pipe including necessary accessories and clamps as required for fittings complete as per the direction of engineer in charge
Providing and fixing necessary fittings coupler, tee, bend 87.5 degree including fixing complete as required.
Providing and fixing 18mm thick gangsaw cut mirror polished granite of required shade as approved by engineer in charge.
Disosal of malba outside cmapus by trolley
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.77 MB
BOQ_937608.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid