REPAIRS TO JOINERY AND OTHER MISC REPAIRS AT ZONE II AND CLEANING OF SEWAGE LINE MANHOLE AND HARD STANDING IN MD ACCN AT ZONE I UNDER GE ARMY JAISALMER

Amount

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specifed and directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specifed and directed.

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete.

Refixing of shutter of any description n exc 1 sqm in same opening complete.

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

S & F 30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as spd in SSR Part -I, Sec 8, clause 8.24 (b).

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F factory made solid panel PVC moulded door shutter, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat complete all as specified.

.-Ditto-all as per item No 12 above but size of frame 125x60mm complete.

S&F flush shutter, 30 mm thick, solid core construction with block board core, and ply wood face panels but one face is covered with decorative laminate face veneer with lipping complete all as specified. Make : Century Plywood/Kit Ply

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

Supply and fix factory made partly wire gauzed and partly panelled PVC door shutter, 30 mm thick (styles), consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; The wire gauze shall be wrapped on an additional square 8 mm M.S Solid tube and this tube shall be welded to M.S Tubes. The wire gauge shall be stretched and tighten firmly

M&L PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works.

Material and labour for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame all as specified and as directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0

Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Supply and fix in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S & F of 100 mm Size stainless steel hinges fixed with screws medium weight complete all as specified.

S&F 150mm long stainless steel barrel tower bolts as specified.

S&F 100 mm long stainless steel barrel tower bolts as specified.

S&F stainless steel handles 150 mm size comp ISI Marked

S&F stainless steel sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long.

S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type E-22 50mm long, articles n exc 200 Cu cm each of Ist class soft wood.

S&F mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with rubber beading exc 0.5 Sqm each pane complete all as specified.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm

S&F in repair 12 mm thick preliminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame work, complete all as specified.

S&F in repair preliminated particle board of 18/19mm, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame work, complete all as specified.

S&F 6 mm thick teak wood lipping to 12 mm thick particle board

S&F 6 mm thick teak wood lipping to 18/19 mm thick particle board

S&F 100 mm size hasp and staple, safety type stainless steel including bolt to hinge plate and fixed to screw.

S&F in repairs continous (piano ) hinges ,mild steel ,bright finish or electro galvanised width of flap 30 mm complete all as specified.

S&F in repairs 40 mm dia cub board knobs fixed with nut screw and washer of mild steel bright finished

S&F 300 mm long stainless steel sliding door bolt with hasp & staple (bolt type) & fixing clips of sheet cast or extruded section and fixing bolt & sliding bolt of extruded section or cast aluminium alloy complete all as specifed.

Demolition of brick work built in CM including all quoin arches etc.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6.

–Ditto- all as per item No 44 above but except bricks.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Supply only water proofing compound (liquid),ISI marked.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint

M&L for two coats of OBD on newly plaster wall surfaces over a coat of primer incl applying with 3 mm thick wall care Putty all as directed by Engr-in charge.

M&L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer.

M&L Preparation of old decorated surfaces of wall by complete removing of existing treatment and applying roller application two coats Oil bound distemper incl applying with 3 mm thick wall care Putty over a coat of primer of surfaces filing or cracks, holes on wall by putty etc complete.

S & F in repairs double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting and making good to floor as per existing complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

Supply and fixing powder coated aluminium grill of 6mm thick with 'F'/'U' type channel for windows complete all as specified.

S&F in repair 100 mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified.

S&F rubber beading to aluminium window/doors of best quality for securing glass panes including removal of glass from the existing aluminium frame carefully and refixing in the same opening complete all as specified.

M&L Plain Fillets n.exc 3 sq.cm of 2nd class hardwood in Square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all spd and as directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing complete all as specified. (Make :- Gareware or equivalent make)

S & F in repair 0.71 mm thick plain, Aluminium sheeting, Alloy 31000 H4 in crumple joint, ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)

S & F in repairs 25 mm thick PVC window/ventilator glazed and skelton shutters with frame including 75 mm size stainless steel hinges 2 Nos, 100 mm aluminium handle 2 Nos, 100 mm size aluminium tower bolt 2 Nos and making good disturbed portion in CM 1:4 including matching with existing finishes complete all as specified.

Taking down steel rolling shutters gear operated or manual operated rolling shutters replacement of weared parts spring laths etc, crank handle ,bearings,crank shaft etc suitable sizes including any welding required where required and refixing at any height including greasing.(replacement parts measured seperately)

M&L for providing and fabricating mild steel 1. 0 mm thick black sheet as in top cover of rolling shutter fixed to wall in proper size ,shape & position suitable for rolling shutter complete all as specified .

S&F in repairs MS spring for rolling shutter size of spring 300mm long inner dia not less than 65 mm and MS wire 6mm as approved .

All as per item No 69 but size of spring 450 mm long inner dia not less than 65mm and dia of MS wire 8 mm as approved by Engineer-charge.

S&F in repairs MS pipe heavy duty of 40 mm dia as in shaft of rolling shutter complete all as approved.

S&F lath section formed from cold rolled strip 1.25mm thick and width as required all as approved .

S&F guide channel 25mm width, depth of channel 65mm not less than 1.0mm thick as required.

S & F in repair for Mild steel 125mm handles for steel window, stove enamelled black

S & F in repair for Mild steel peg stay for steel window, stove enamelled black

Demolition floor hearth or wall tiling including cement mortar bedding and removing unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L for Glazed ceramic jointless tiles dark shade in vertical surface 450X300X7mm thick,jointless tile set and jointed in neat cement slurry and pointed in white or coloured cement, set in 10mm thick backing coat in CM 1:4

M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

S&Fin repair vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs.(Cera Cat part No-53010102, Hindware Cat Part No.- 20042)

S&Fin repair wash hand basin vitereous china flat back size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete fixed in repairs.

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete fixed in repairs. Make Prayag,Cera Cat Part No-B1010102, Hindware)

S&F in repair 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including taking down of old unserviceable water storage tank all as directed by Engg-in-Charge

Cleaning of septic tank, man holes and inspection chamber etc. by means of removing the silt, sludge, excreta etc. or other materials, manually or mechanically and depositing the same, where directed at a distance not exceeding 150m including excavation of pits of required size to accommodate the foul materials taken out from septic tank, manholes, soakage pits and covering of the same with soil, not less than 30cm thick layer and making good all excavated site as required and as directed by Engineer-in-Charge. Note for item No. 82.00 :- (i) Depth of silt, sludge, excreta, etc shall only be measured and paid. (ii) Dewatering/pumping out of foul water shall be measured and paid separately.

Pumping out foul water from soakage wells/septic tank mechanically and removing sludge of capacity 10 users complete all as directed by Engineer-in-charge.

---- ditto --- all as per item No. 83.00 above but 20 users

---- ditto --- all as per item No. 83.00 above but 50 users

---- ditto --- all as per item No. 83.00 above but 100 users

---- ditto --- all as per item No. 83.00 above but 250 users

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3.00m depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed.

Supply only integral water proofing compound in sealed pack (ISI marked) complet all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick on stone masonry surface in cement mortar 1:4 including water proofing compound and finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-charge (Note :-Supply only water proofing compound shall be measured and paid separately).

Demolition of cement concrete reinforced of any description and in any position not other wise specifically provided and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm bore set in cement mortar including demolition of packing under and hauching against sides of pipes complete all as directed by Engineer-in-charge. (Note :- Excavation and earth work shall be measured and paid separately.

--- ditto --- all as per item No. 95.00 above but of 200mm bore.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm bore pipe all as specified & directed by Engineer-in-charge.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm bore pipe all as specified & directed by Engineer-in-charge.

M&L for 150mm bore salt glazed stoneware drain pipes (ISI marked) laid in trenches and jointed in CM (1:1) and tested complete all as specified & directed by Engineer-in-charge.

M&L for 200mm bore salt glazed stoneware drain pipes (ISI marked) laid in trenches and jointed in CM (1:1) and tested complete all as specified & directed by Engineer-in-charge.

S&F, 100mm bore (sand cast pipe) soil, waste and vent pipes in any length with or without ears and jointing with cement & fixed to walls complelte all as specified & directed by Engineer-in-charge.

Dismantling of cast iron or reinforced concrete drain pipes 100 mm dia jointed in cement mortar

Dismantling of cast iron or reinforced concrete drain pipes 75 mm dia jointed in cement mortar

S&F , 75mm bore (sand cast pipe) soil, waste and vent pipes in any length with or without ears and jointing with cement & fixed to walls complelte all as specified & directed by Engineer-in-charge.

S&F in repair 100mm bore cast iron cowl (sand cast) all as specified & directed by Engineer-in-charge.

Demolition of precast concrete block walling built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in solid block masonry exceeding 10cm width and setting in cement mortar 1:6 all as specified & directed by Engineer-in-charge.

S&F in repair, 110mm bore PVC (SWR) single socketed in any length with rubber ring joints & fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F in repair, 75mm bore PVC (SWR) single socketed in any length with rubber ring joints & fixed to walls all as specified and directed by Engineer-in-charge.

S&F in repair, 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge.

S&F in repair, 125mm/110mm dia PVC (SWR) gully trap, setting & jointing with solvent cement complete all as specified & directed by Engineer-in-charge.

S&F 100mm cast iron sanitary connection socket to fit WC outlet complete all as specified & directed by Engineer-in-charge.

Cleaning of choked sewage line of 100 mm bore of pipe including drains by rodding and well flushing with water, taking out waste materials any quantity and depositing where directed including covering the same with at least 30cm thick layer of soil all as directed by Engineer-in-Charge.

---- ditto --- all as per item No. 113.00 above but 150mm bore sewage line

---- ditto --- all as per item No. 113.00 above but 200mm bore sewage line

---- ditto --- all as per item No. 113.00 above but 250-300 mm bore sewage line

---- ditto --- all as per item No. 113.00 above but 300-600 mm bore sewage line

Cleaning of manholes not exceeding 1.5m deep by means of removing the silt, sludge, etc & bailing out foul water complete manually or mechanically and covering of the same with soil, not less than 30cm thick layer and making good all excavated site as required and as directed by Engineer-in-Charge.

Cleaning of manholes exceeding 1.5m but not exceeding 3m depth by means of removing the silt, sludge, etc & bailing out water complete manually or mechanically and covering of the same with soil, not less than 30cm thick layer and making good all excavated site as required and as directed by Engineer-in-Charge.

Note for item No. 113.00 to 119.00:- T&P or other machinery required for cleaning or dewatering are deemed to be included in the quoted rate of the respective items as in septic tank, soakage well, manhole, sewage line etc.

Cleaning of floor trap, gully trap in any size by means of removing the silt, sludge, etc & bailing out water complete manually or mechanically and removing the same out side MD land complete and making good all as directed by Engineer-in-Charge.

Blockage of WC/EWC in any type floor by means of removing the silt, sludge, etc & bailing out water complete manually or mechanically and removing the same out side MD land complete and making good all as directed by Engineer-in-Charge.

Blockage of urinal in any type floor by means of removing the silt, sludge, etc & bailing out water complete manually or mechanically and removing the same out side MD land complete and making good all as directed by Engineer-in-Charge.

Blockage of WHB in any type floor by means of removing the silt, sludge, etc & bailing out water complete manually or mechanically and removing the same out side MD land complete and making good all as directed by Engineer-in-Charge.

BHAGWATI CONSTRUCTION

Vinay Traders

Dadhich Engineers

M/S SHRI HARI CONSTRUCTION COMPANY

Bhawani Constructions

M/s Shree Construction Company

S R ENTERPRISES

deepaktraders