Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹58.5 L
EMD Value
₹1.2 L
Closing Date
23 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engine Division, Koraput
HINDUSTAN AERONAUTICS LIMITED Engine Division, Koraput, Sunabeda- 763002
REPAIR AND RENOVATION WORKS INSIDE ADAV HIGH SCHOOL IN HAL TOWNSHIP.
6850
e TN NO-W-03/24-25
Works
Mig Complex- Engine Divn-Koraput-Civil
₹0
₹1.2 L
23 May 2024
6 Apr 2024
6 Apr 2024
23 May 2024
Supplying carrying to site all approved materials & providing Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).using Medium shade pigment using 50% white cement 50% Grey cement , all complete as per specification and direction of EIC.
Labour charges for dismantling/ taking out of existing old damaged concrete, PCC, tiles tarfelt layer including base plaster of any thickness / description, including haking for key, cleaning of bitumen/ primer over the surface with wire brush, scrubbing down with water etc. to receive new plaster etc. The work also includes disposal of debrises upto a lead distance of 50m or nearer, all complete as per specification and direction of EIC.
Supplying carring to site all approved material providing and laying PCC (1:2:4) using 20 mm and down hard granite graded stone aggregates in roof , kerbs or mud stops, rounded or chamfered on edges,over RCC roof with a proper slop towards nearest rain outlet pipe and curing etc. all complete as per specification and direction of E.I.C.
Supplying carring to site all approved material providing and laying 25mm thick, PCC (1:2:4) using 12.5mm down hard granite graded stone aggregates over RCC roof with a proper slope towards nearest rain outlet pipe and curing etc. all complete as per specification and direction of E.I.C.
Supplying and carrying to site all approved material, Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt of approved make. The work consists of applying 1st coat of bitumen primer applied @ 0.4 ltr / Sqm of the surface area. The bitumen primer for bitumen membrane manufactured by the same manufacture shall have density at 25°C in the range of 0.87 – 0.89 Kg/Ltr and viscosity 70 – 160 CPS. The primer shall confirm to the requirement laid down in IS-3384.. The second coat of bonding material of blown type bitumen 85/25 conforming to IS : 702 heated to the required temperature applied @ 1.20 kg/ smt of the surface area. The work also includes cutting grooves in brick wall of required width and depth and shapiing horizontol face of groove with cement mortar 1 :3 after laying of APP membrane into it. In the third course the APP modified membrane of specified thickness shall be laid over the blown type bitumen using buten torch and sealing all joints etc, and preparing the surface complete. Each strip of APP membrane shall overlap the preceding one by one at least 10cm at the longitudinal edges and 15cm at the ends.
All overlaps shall be firmly bonded with bitumen primer / blown grade bitumen & levelled by heating the overlaps with butane torch. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The work to be carried out through authorised applicator of manuufacturer complete all as specified and as per direction by Engineer in charge.The treated area of water proofing shall be tested for any leakages by pond test. The rates include for necessary end and side laps and work in any position and in any shape etc.
Labour charges for taking down old cement plaster on wall surface which includes raking out joints,hacking for key,scrubbing down with water of any description and any thickness. The work also includes erection of safe and rigid scaffolding and disposal of debrises upto a lead distance of 50m or nearer all complete as per specification and direction of E.I.C.
Supplying and carrying to site all approved materials and providing 15mm thick plastering with CM (1:4) and mixing of integral water proofing compound as per manufactures guidelines per bag of cement of 50 Kg of approved make. The work includes erection of necessary scaffolding including rendering, floating,drip couse,border in chajja finishing the surface even and neat curing etc. all complete as per specification and direction of Engineer-in-charge.
Demolishing brick work (built in cement mortar) by manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead etc all complete as per specification and direction of Engineer-in-charge.
Supplying carrying to site all approved materials & providing Brick masonry work with common burnt clay F.P.S (non-modular bricks of class designation 7.5 in super structure in CM(1:4). The work also includes erection of safe and rigid scaffolding, curing etc. all complete as per specification & direction of EIC.
Supplying carrying to site all approved materials & providing, Finishing walls with ready mixed Premium acrylic emulsion Exterior paint,( company depot tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. The paint shall be applied with two or more coats applied @ 1.43 litre/ 10 sqm. over and including priming the surface with one coat of exterior primer applied @ 0.90 litre/10 sqm. in all heights..The work shall include the preparation of wall surface by using sand paper, wire brush, removal of scales and peeled surface, filling the pits / depression, nail-holes by putty and painting uniformly without any patches and brush marks including erection of safe scaffolding, cleaning, washing the areas after painting etc. all complete as per specifications and directions of Engineer in charge.
Supplying carrying to site all approved materials & providing, Distempering with 1st quality acrylic distemper ( ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour,The distemper shall be applied over the wall surface with two or more coats of painting and including one coat of water thinable priming coat with cement primer having VOC content less than 50 gram/liter in all heights. The work shall include the preparation of wall surface by using sand paper, wire brush, removal of scales and peeled surface, filling the pits / depression, nail-holes by putty and painting uniformly without any patches and brush marks including erection of safe scaffolding, cleaning, washing the areas after painting etc. all complete as per specifications and directions of Engineer in charge.
Supplying,carrying to site all approved material and painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with Two or more coats on existing wall, wood, steel or any other surface over an under coat of suitable shade with ordinary paint of approved brand etc. at all heights neatly without brush mark. The work shall include preparation of the surfaces by using sand/ emery papers, cleaning, removal of the scales, peeled surfaces, filling the pits/ depressions, nail – holes, knots etc. by putty and applying paint by using brush/ spray to get uniform finish without any patches including erection of safe/ rigid scaffoldings, cleaning the area after painting etc. all complete as per specifications and directions of Engineer-in-charge.
Supplying, carrying, providing & fixing fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 etc. all complete as per specifications and directions of Engineer-in-charge.
Supplying and carrying to site all approved material and providing, mixing and applying 12mm average thickness SBR Polymer ( of approved make) modified cement mortar in proportion of 1:4 with polymer minimum 2% by weight of cement used as per specification and direction of EIC.
Total
I / We hereby quote percentage above (+) or below (-) the Estimated cost
Sub Total Works Amount
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable
ADD CESS @ 1%
GRAND TOTAL
The defect liability period for the above contract shall be for the period of Five years for Special nature of work (Water proofing- For item no 02,03,04,05 ) and One year for other items ..During this period the contractor will be responsible to rectify all the defect noticed and pointed out by the Department in respect of works executed by him against above contract. 10% of executed amount for special nature / items of Work will be considered as defect liability deposit for such items of Work . This amount will be withheld for a period of 05 years. A guarantee on non-judicial stamp paper of Rs.200/- or as specified against an item in the BOQ has to be furnished by the Contractor along with the final bill.
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT03.pdf
TENDER_DOCUMENT • 1.26 MB
AM.pdf
TENDER_DOCUMENT • 5.21 MB
EPS.pdf
TENDER_DOCUMENT • 0.02 MB
NEWGCC.pdf
TENDER_DOCUMENT • 2.92 MB
UPBOQ371-1.pdf
TENDER_DOCUMENT • 0.24 MB
PBO03.xlsm
TENDER_DOCUMENT • 0.03 MB
UNDERTAKING.pdf
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .