A/R and M/O qtrs Type IV Type III Type II and Type I and Transit PWD colony Jawahar Park Solan Distt Solan

Amount

Excavation in foundation trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 ( one thousand nine hundred ninety)volum-i (one) and sorting out useful and unuseful materials and transporation of the unuseful material for disposing at dumping site (to be arranged by the contractor) to the satisfcation of Engineer-in-Chargethrough all modes of transporation including head load, animal load or mechnical means alongwith its leveling fine dressing and with all kind of labour, machineries , tools equpmentsand safety measures and incidentals necessary to complete the work by mechnical means and labour (if required). All usefull materials, such as stones, shingles, aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads lifts through all modes of transportation and used/ removed as per the direction of the Engineer-in -Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidental charges.

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4graded stone aggregate 20mm nominal size) mechanically mixed, vibrated and curing complete excluding cost of form work in walls including attached buttresses,pilasters and their caps and basis and string courses etc. upto floor two level as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1:4:8[ One cement isto Four sand isto Eight graded crushed hard stone aggregate 25 (Twenty five) millimeters nominal size] mechanically mixed, vibrated and curing complete , excluding cost of form work in foundation and plinth, as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Bricks work using common burnt clay Second class building bricks in foundation and plinth in cement mortar 1:6 (One cement isto Six sand) in all depths and levels as per drawing and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing fixing 2nd class deodar wood work in frames of doors, windows, clerestory windows and other frames wrought,framed and fixed in position as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 40mm( fourty milimeters) thick 2nd class deodar wood battened and framed door shutters including bright finished or and black enamelled iron hinges with necessary screws as per HP.PWD. Specification 1990 Volume-1, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing White glazed tiles 6 mm (six milimeters) thick in flooring, treads of steps and landing laid on a bed of 12 mm(twelve milimeters) thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement including carriage of all labour, equipment and material to various location through all modes of transportation in all leads and lift, including all incidental charges.

Providing and fixing White glazed tiles 6mm (six millimeter) thick in skirting, risers of steps and dedo 12mm thick cement mortar 1:3(one cement: three sand)and jointed with cement slurry as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge and as per Architectural drawing including hoisting of material in all heights and levels, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In R.S.Joists,channels angles,tees as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Painting one coat (excluding priming coat)on previously painted steel and other metal surfaces with readymixed paint acid resisting brushing to give an even shade including cleaning of all dirt, dust and other foreign matter as directed by Engineer-in- Charge, as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Painting one coat with ready mixed white paint (excluding priming coat) on previously painted wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of all dirt dust and other foreign matter sand papering and stopping:- as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead, lift and all incidental charges.

One extra subsequent coat with ready mixed white paint on previously painted wood wood based with ready mixed paint (white) as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

15mm (Fifteen milimetres) cement plaster in Cement Mortar 1:4 (1Cement:4 Sand) in single coat on the rough side of brick/ concrete/stone walls for interior/exterior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Distempering (one coat) with oil bound washable distemper of approved brand and manufacture and of required shade, on decorated wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papered smooth as per direction of the Engineer-in-Charge. as per drawing, HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

One extra subsequent coat of oil bound washable distemper of approved brand and manufacture and of required shade on freshly distempered wall surface as per direction of the Engineer-in-Charge. as per drawing, HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Repairs to plaster in patches of 2.50 sqm. (two point five zero square meter ) and under and 10 to 15mm (ten to fifteen millimeter) thick with cement mortatr 1:4 (one cement is to four sand) including cutting the patches in proper shape and re-plastering the surface of the wall including disposal of rubbish to the dumping ground within all lead as per direction of Engineer-in-Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying and fixing galvanized steel babed wire (IS 278-1962 type-I) weighing 9.38kg (nine point thirty eight kilogramme) per 100 (one hundred) running meter (minimum ) straining and fixing to any type of standard rails, staing bolts inlcluding screwing with and provision of stapples or steel pinsetc as per direction of Engineer-in-Charge (posts and struts of wooden, concrete, steel etc. and staining bolts shall be paid separately) as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor as per direction of the Engineer-in-Charge and H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

15mm (fifteen milimeter) nominal bore

25mm(twenty five milimeter) nominal bore

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement:one sand (Seat cover tobe measured and paid for separately):-Ordinary closet. as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 10.00/12.50 litres capacity high level C.I. flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as syphonic arrangement, 15mm nominal size brass ball valve with polythene float, unions and coupling for connections with inlet, outlet and overflow pipes etc. including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe chain and pull are not included in the rate). as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 630mmx450mm (six thirty into four fifty milimeters) vitreous China Flat back wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:-as per direction of Engineer in charge and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous china of 600x450x150mm(six hundred into four hundred fifty into one hundred fifty milimeter) size kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings, as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing C.P. brass towel rail complete with C.P brass screws and washers 600x20mm (six hundred into twenty millimeter)including carriage of materials in all leads and lifts. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Providing and fixing 15 (Fifteen) millimeters dia chromium plated brass bib tap with capstan head complete in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Providing and fixing chromium plated brass pillars tap 15mm (fifteen millimeter) dia with capstan, including brass check nut as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm (fifteen milimeters) C.P. brass angle valve without Nuts and pipe as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 15mm (fifteen milimeters) dia CP Brass stop cock as per the direction of Engineer in Charge and as per HP.PWD. Specification i/c carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lifts i/c all incidental charges.

Providing and fixing 15 ( fifteen ) milimeter nominal bore PVC connection pipe with brass unions having 45 ( forty five ) centimeter length in as per direction of Engineer in Charge and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing G.I.or M.I Union of following sizes (where not included in the items as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

15 mm (fifteen milimeter ) dia

25mm (twenty five milimeters) dia

Providing and fixing 32 mm dia P.V.C. waste pipe flexible (Coil type) length not less that 800 mm as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm nominal bore brass ball valve (horizontal plunger type) High pressure with polythene plastic floats complete in all respect as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing & and fixing 110mm*90mm ( one hundred ten into ninety milimeters) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all respects as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixingi high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

110 mm(one hundred ten milimeter) dia.

75 mm(Seventy five milimeter) dia.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

110 mm (one hundred ten milimeters)dia.

75 mm (seventy five milimeters) dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm(three milimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete:- as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

110mm(one hundred ten milimeter)

75mm (seventy five milimeter) dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete:- as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

110 mm (one hundred ten milimeter) dia.

75 mm (Seventy five milimeter) dia.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

110 mm (one hundred ten milimeter) dia.

75 mm (Seventy five milimeter) dia.

Hem Raj

M/s Tanmit Construction

Jitender Sharma

R B Contructions

Arun Sharma