CE CHZ PAT T 16 2024 25 PROVISION OF DEFI MD ACCN FOR OFFICERS AND OTHER RANKS At PATIALA UNDER GE S PATIALA

Amount

Total amount of Sch 'A' Sec-I ( BUILDING WORKS ) Lump sum price worked out by the contractor for " BUILDING WORKS " as listed in schedule 'A' Part-I

Total amount of Sch 'A' Sec II (SITE CLEARANCE, SITE DEVELOPEMENT & MISC. EARTH WORKS) Lump sum price worked out by the contractor for " SITE CLEARANCE & Earth Works " as listed in schedule 'A' Part-II

Total amount of Sch 'A' Sec III ( INTERNAL WATER SUPPLY WORKS ) Lump sum price worked out by the contractor for " BUILDING WORKS " as listed in schedule 'A' Part-III

Total amount of Sch 'A' Sec IV (INTERNAL ELECTRIFICATION WORKS) Lump sum price worked out by the contractor for " BUILDING WORKS " as listed in schedule 'A' Part-IV

Total amount of Sch 'A' Sec V (SEWAGE DISPOSAL WORKS) Lump sum price worked out by the contractor for " SEWAGE DISPOSAL WORKS " as listed in schedule 'A' Part-V

Total amount of Sch 'A' Sec VI (AREA DRAINAGE WORKS) Lump sum price worked out by the contractor for " AREA DRAINAGE WORKS " as listed in schedule 'A' Part-VI

Total amount of Sch 'A' Sec VII (FENCING & GATE WORKS) Lump sum price worked out by the contractor for " SECURITY WALL/FENCING WORKS " as listed in schedule 'A' Part-VII

Total amount of Sch 'A' Sec VIII (ROAD, PATH, CULVERTS AND HARDSTANDING WORKS) Lump sum price worked out by the contractor for " ROAD/PATH/CULVERT WORKS " as listed in schedule 'A' Part-VIII

Total amount of Sch 'A' Sec IX (EXTERNAL WATER SUPPLY WORKS) Lump sum price worked out by the contractor for " EXTERNAL WATER SUPPLY WORKS " as listed in schedule 'A' Part-IX.

Total amount of Sch 'A' Sec X ( EXTERNAL ELECTRIC SUPPLY WORKS) Lump sum price worked out by the contractor for " EXTERNAL ELECTRIFICATION WORKS " as listed in schedule 'A' Part-X.

Total amount of Sch 'A' Sec XI (RAIN WATER HARVESTING WORKS) Lump sum price worked out by the contractor for " RAINWATER HARVESTING WORKS " as listed in schedule 'A' Part-XI.

Schedule 'A'Section-XII(Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

EXTERNAL ELECTRIFICATION Supply and laying sand river for cushioning with layers of sand 8 cm before laying of cable and 15 cm after laying of cable (total 23 cm) in trenches ,duly punning to a thickness of 18 cm including watering and consolidation complete all as specified & directed. (Note: Thickness after punning shall be measured for payment )

Supply, laying, testing & commissioning of HT 11 KV (Earthed) XLPE insulated, screened, PVC inner sheathed, electric power cable, galvanized steel strip or wire armoured (heavy duty) with multistranded aluminium conductor 11000 volts grade confirming to IS 7098 Part II amended upto date, of size 3 core , cross sectional area 95 sqmm, ISI marked, including suitable size of cable glands, cable lugs etc., laid in trenches, fixing on poles with clamps or laid under floors or passing through pipes/ductscomplete all as specified & directed. Note: 1. Excavation & Earth work, GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respective items of the schedule 2. Cable length exceeding one drum length (exceeding 500 RM length) shall be tested at FACTORY Premises before dispatch in presence of Rep of Accepting Offr within overall cost coated. 3. All the cable shall be embossed with year of manufacturing, meterage at every metre in addition to its own standard makings as per IS i.e. Size, voltage etc. Cable shall also be tested in the presence of Engr-in-Charge after laying in the trench before returning filling in the trench.

Supply, Laying, Testing & Commissioning of LT XLPE cable insulated, screened, PVC inner sheathed, electric power cable, galvanized steel strip or wire armoured (heavy duty) with multistranded aluminium conductor 1100 volts grade confirming to IS-7098 (Part-1) 1988 amended upto date , of size 400 sq mm 3½ core, ISI marked, including suitable size of cable glands, cable lugs etc., laid in trenches, fixing on poles with clamps or laid under floors or passing through pipes/ducts complete all as specified & directed. Note: 1. Excavation & Earth work, GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respective items of the schedule

All as per description of Serial item No. 15 above, but size of cable 240 sq mm 3½ core.

All as per description of Serial item No. 15 above, but size of cable 185 sq mm 3½ core.

All as per description of Serial item No. 15 above, but size of cable 95 sq mm 3.5 core.

All as per description of Serial item No. 15 above, but size of cable 70 sq mm 3.5 core.

All as per description of Serial item No. 15 above, but size of cable 50 sq mm 3.5 core.

All as per description of Serial item No. 15 above, but size of cable 35 sq mm 3.5 core.

All as per description of Serial item No. 15 above, but size of cable 25 sq mm 4 core.

All as per description of Serial item No. 15 above, but size of cable 16 sq mm 4 core.

All as per description of Serial item No. 15 above, but size of cable 10 sq mm 4 core.

Supply, install, commissioning testing of transformer, energy efficient as per IS-1180 Part-1: 2014 and BEE certified Level-2, step down 11KV/433V outdoor type copper wound 160 KVA Capacity with necessary, standard fittings of capacity 3 Phase, 4 wire, 50 cycles vetor group Dyn-11 having primary (HT) voltage of 11 KV and secondary (LT) voltage of 433 V off load tap changing gear to provide volts with tapping on primary side having steps of + 2.5% from (+) 5% to (-) 7.5% in equal steps of 2.5% each so as to vary voltage on secondary side connected externally and hand operated OFF circuit tape changing switch including first fill of transformer oil, the transformer shall be delta connected on 11KV side & star connected on secondary side with neutral brought out including provn of HT busing on HV (delta connection) side & LT cable box on LV (star connection) side complete all as specified and directed .Note : 1. Pre dispatch inspection shall be carried out by the rep of Accepting Officer and Transformer shall be dispatched directly from the factory. 2. Pre commissioning test shall be carried out by IEM/SrEI. 3. Drawing of platform must got approved from GE before execution and including suitable size of platform (1.2 metres high, unless specified otherwise) as recommended by the OEM. 4.Drawing of Transformer shall be approved by GE Before placing order.5. Cost of Platform will be included in rate quoted by the contractor for this item.

Supply, install, commissioning testing of transformer, energy efficient as per IS-1180 Part-1: 2014 and BEE certified Level-2, step down 11KV/433V outdoor type copper wound 315 KVA Cap with necessary, standard fittings of capacity 3 Phase, 4 wire, 50 cycles vetor group Dyn-11 having primary (HT) voltage of 11 KV and secondary (LT) voltage of 433 V off load tap changing gear to provide volts with tapping on primary side having steps of + 2.5% from (+) 5% to (-) 7.5% in equal steps of 2.5% each so as to vary voltage on secondary side connected externally and hand operated OFF circuit tape changing switch including first fill of transformer oil, the transformer shall be delta connected on 11KV side & star connected on secondary side with neutral brought out including provn of HT busing on HV (delta connection) side & LT cable box on LV (star connection) side complete all as specified and directed .Note : 1. Pre dispatch inspection shall be carried out by the rep of Accepting Offr and Transformer shall be dispatched directly from the factory. 2. Pre commissioning test shall be carried out by IEM/Sr,EI. 3. Drawing of platform must got approved from GE before execution and including suitable size of platform (1.2 metres high, unless specified otherwise) as recommended by the OEM. 4.Drawing of Transformer shall be approved by GE Before placing order. 5. Cost of Platform will be included in rate quoted by the contractor for this item.

Supply, installing, testing and commissioning of Air-break, gang operated, triple pole switch with drop out fuses, outdoor, horizontal mounting type (ISI marked), mechanically operated, mounted on 12 Nos insulators for current rating upto 200 Amps complete with operating mechanism fabricated from 25mm bore GI pipe (light grade) with steel frame worked from ground level, with locking arrnagments including 65mm pad locks with two keys, complete suitable for HT 11 KV, 50 Hz AC supply and making necessary electric connections, complete all as directed.

Supply & Fixing of HT 11KV Lighning arrestors explusion type for out door type use complete with all fittings and fixing arrangement ,transmission class, discharge capacity 65 kilo amps including bracket clamps, nuts , washers and connecting with earth wire complete all as specified and directed .

Supply, transporitng to site and erecting in true vertical position steel tubular swaged welded pole complete with Cast Iron/MS base plate 6mm thick and of size 300x300mm, final taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S. tubing conforming to IS-2713 part-II type 410 SP-55 (11.0 metre long) including of holes of required Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bends at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole with black paint by stenciled letters/figures of 8cm height ,complete all as specified and directed. Note:1. Excavation, earthwork, PCC foundation shall be measured and paid separately.

Supply & Fixing Cable jointing kit for 11 KV (earthed) grade cable for out door termination heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured Al conductor cable of size 95 sq mm 3 core complete all as specified and directed .

Material &Labour for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections confirming to relevant IS including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of onezinc primer coat, one under coat and one finishing coat of synthetic enamel paint, complete all as specified and directed.

Material &Labour for Anti climbing devices ,spikes type,fabrictaed out of MS bars(round ,square or flat) including nuts,bolts and washers and welding in two halves made to shape to suit the cross section of pole including provision of two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

Material &Labour for Danger notice boards/plate of size 250 mm x 200mm x 1.6 mm thick, mild steel sheet, vitreous enamelled white with letters, figures and conventional skull and bones in signal red colour and fixed with and including MS clamps made out of MS Flat 25x 3 mm, bolts and nuts of approved size for HT poles,transformer chain link fencing , complete all as specified and directed.

Supplying and laying unreinforced precast concrete cable cover, class HV, Type I , Flat size 300mm x 180mm x 40mm, ISI marked for protection of HT cable 11000 V of size 120 sqmm 3core complete all as specified and directed.

Supplying and laying unreinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm ISI marked for protection of LT cable 1100 V complete all as specified and directed.

Supply, transporitng to site , erecting and fixing in truly verticle position, steel tubular swaged pole, type 410 SP-22 (8.5 metre long) complete finial taper plug, bolts, nuts, screws as specified, CI base plate including drilling holes and painting with two coats of black bituminous paint externally and internally, providing 30cm wide alternate strips with yellow and black synthetic enamal paint upto 1.2m height from ground level and numbering the pole (with black and white paint), underground part of the pole shall be painted with black bituminous paint complete all as specified and as directed. Note:. Excavation, earthwork, PCC foundation shall be measured and paid separately.

Supply, Installation, commissioning and testing of LED street light fitting of 35 Watts rating enclosed in high grade aluminum pressure die-cast housing with High efficiency polycarbonate UV stabilized cover suitably gasketed including high power LEDs, having secondry optics for uniform distribution of light, Ingress protection IP-66, class I operating voltage range 120 V - 270 V, 50 HZ, AC heat/thermal management compliance & system light efficacy of fitting should not less than 110 lumen/Watt, easily adjustable for different mounting pipes, luminaire safety compliance to IS-10322, dust and water proof cabinet, Effeciency of driver electronic not less than 90%, power factor of complete fitting not less than 0.95 and including PVC pipe 20 mm dia with clamps for passing through the wire 1.0 sqmm 3 core copper conductor approximate length 08 RM from street light to junction box with connection complete all as specified & directed. Note: Make of driver shall be same as that of luminaries.

Material & Labour for Street light bracket made out of GI tubing 40mm dia, light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50mm wide 5mm thick flat iron with M.S nuts, bolts 75 mm long 12 mm dia - 4 Nos & flat washer (3mm thick) 01 No for each including painting with two coats of aluminium paint over one coat of red oxide to the M.S clamps & brackets etc complete all as specified and directed.

Supply & Fixing of Junction box of size 250x200x150 mm, made out of PVC , heavy grade having aluminium bus bar strip 4 Nos mounted on insulators and 1 Nos outgoing MCB 6 Amps SP 240 Volts, the juction box should front openable and lockable hinged shutter with self closing arrangement, outdoor type weather and vermin proof including fixing lamp, provision of entry for incoming and outgoing cables complete duly painted with two coats of silver paint over a coat of red oxide primer complete all as specified and directed

Supply, installing, testing and commissioning, factory made and tested (incl CPRI type test certified), LT feeder pillar box (KIOSK) of appropriate dimensions (as per Indian Electricity rules) to accommodate following components, outdoor type, platform/floor mounted front and back openable, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having 01 No bus bar chambers on porcelain insulators and cable alley for cables. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm thick CRCA MS sheet and 50x50x6mm thick angle iron frame work, powder coated finish over one coat of red oxide primer, front & rear opening type, with aprons for cable entry, with removable door shutter and locking arrangement {including provn of 65mm lock with 2 keys} mounted on four legs 90cm high (30 cm below ground level and 60 cm above ground level), internal wiring with PVC insulated, multistranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 4 sqmm. complete all as specified and directed.

Incoming (a) Aluminium bus bar of rating 1000 Amps for four pole including PVC heat shrink sleeves (RYB & N) : 01 Set (b) MCCB four pole 630 Amp 415 Volts, DPX 250 with microprocessor release and rupturing capacity 36 KA at 415 V AC , 50 Hz, adjustable, Including rotary handle and one additional DPX spreader 4 links set - 01, Ics=100%Icu, complete all as specifed - 01 No. (c) Three phase (3 Ph) multifunctional meter with communication , LCD display, dimensions 96x96mmx50mm, 3 phase true RMS(Voltage, current) supply voltage : 100 to 240V Ac, 50/60 Hz with all necessary connection complete all as specified and directed – 01 Nos. (d) CTs of ratio 400/5 - 01 set of three. (e) Indication lamps R,Y,B ( LED type) - 01 Set. Outgoing :- (a) MCCB four pole 200 Amp with microprocessor release and rupturing capacity 25 KA at 415 V AC , 50 Hz, Including rotary handle and one additional DPX spreader 4 links set - 01, Ics=100%Icu complete all as specifed - 04 No (b) Timmer Astronomical 32A, 3 pole with MCB complete. (c) Wiring of above accessory with suitable size of copper conductor cable

Supply, installing, testing and commissioning, factory made and tested (incl CPRI type test certified), LT feeder pillar box (KIOSK) of appropriate dimensions (as per Indian Electricity rules) to accommodate following components, outdoor type, platform/floor mounted front and back openable, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having 01 No bus bar chambers on porcelain insulators and cable alley for cables. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm thick CRCA MS sheet and 50x50x6mm thick angle iron frame work, powder coated finish over one coat of red oxide primer, front & rear opening type, with aprons for cable entry, with removable door shutter and locking arrangement {including provn of 65mm lock with 2 keys} mounted on four legs 90cm high (30 cm below ground level and 60 cm above ground level), internal wiring with PVC insulated, multistranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 4 sqmm.

Incoming (a) Aluminium bus bar of rating 300 Amps for four pole including PVC heat shrink sleeves (RYB & N) : 01 Set (b) MCCB four pole 200 Amp 415 Volts, with microprocessor release adjustable and rupturing capacity 25 KA at 415 V AC , 50 Hz, Including rotary handle and one additional DPX spreader 4 links set- 01, Ics=100%Icu complete all as specifed - 01 No (c) Three phase (3 Ph) multifunctional meter with communication , LCD display, dimensions 96x96mmx50mm, 3 phase true RMS(Voltage, current) supply voltage : 100 to 240V Ac, 50/60 Hz with all necessary connection complete all as specified and directed – 01 Nos. (d) CTs of ratio 400/5 - 01 set of three. (e) Indication lamps R,Y,B ( LED type) - 01 Set. Outgoing :- (a) MCCB four pole 40 Amp confirming to IEC 60947-2 & IS – 13947-3 thermal magnetic release and adjustable over load setting 0.8 – 1.0 x In and adjustable short circuit setting 6 – 10 x In and rupturing capacity 16 KA at 415 V AC , 50 Hz, Including rotary handle and one additional DPX spreader 4 links set - 01, Ics=100%Icu complete all as specifed complete - 06 No (b) Wiring of above accessory with suitable size of copper conductor cable

Supply, installing, testing and commissioning, factory made and tested (Incl CPRI type test certified), LT feeder pillar box (KIOSK) of appropriate dimensions (as per Indian Electricity rules) to accommodate following components, outdoor type, platform/floor mounted front and back openable, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having 01 No bus bar chambers on porcelain insulators and cable alley for cables. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm thick CRCA MS sheet and 50x50x6mm thick angle iron frame work, powder coated finish over one coat of red oxide primer, front & rear opening type, with aprons for cable entry, with removable door shutter and locking arrangement {including provn of 65mm lock with 2 keys} mounted on four legs 90cm high (30 cm below ground level and 60 cm above ground level), internal wiring with PVC insulated, multistranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 4 sqmm complete all as specified and directed.

Incoming:_ (a) Aluminium bus bar of rating 400 Amps for four pole including PVC heat shrink sleeves (RYB & N) : 01 Set (b) MCCB four pole 250 Amp 415 Volts, with microprocessor release, adjustable and rupturing capacity 36 KA at 415 V AC , 50 Hz, Including rotary handle and one additional DPX spreader 4 links set - 01, Ics=100%Icu complete all as specifed complete - 01 No (c) Three phase (3 Ph) multifunctional meter with communication , LCD display, dimensions 96x96mmx50mm, 3 phase true RMS(Voltage, current) supply voltage : 100 to 240V Ac, 50/60 Hz with all necessary connection complete all as specified and directed – 01 No make: Selec Model : MFM384-C-CE or other equivalent make. (d) CTs of ratio 250/5 - 01 set of three. (e) Indication lamps R,Y,B ( LED type) - 01 Set. Outgoing :- (a) MCCB four pole 63 Amp confirming to IEC 60947-2 & IS – 13947-3 thermal magnetic release and adjustable over load setting 0.8 – 1.0 x In and adjustable short circuit setting 6 – 10 x In and rupturing capacity 16 KA at 415 V AC , 50 Hz, Including rotary handle and one additional DPX spreader 4 links set - 01, Ics=100%Icu complete all as specifed - 05 No (b) Wiring of above accessory with suitable size of copper conductor cable

Material &Labour for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe upto150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply, testing and commissioning of 150 kVAR APFC panel Compartmentalized free standing floor /Wall mounting, outdoor type LT DB of 1300 MM(width) x 500 mm(Depth) X 1800 mm(height) made by 2mm sheet steel, powder coated fitted with aluminium bus bar of suitable size for minimum 400A, three phase 415 V AC and Suitable for mounting of following components:-

Supply, testing and commissioning of 75 kVAR APFC Panel Compartmentalized free standing floor mounting, Outdoor type LT DB of 1000 MM(width) x 350 mm(Depth) X 1250 mm(height) made by 2mm sheet steel, powder coated fitted with aluminium bus bar of suitable size for minimum 160A, three phase 415 V AC and Suitable for mounting of following components:-

Supply &Fixing of Disc type insulator, porcelain, vitreous 145 mm high and 255 mm dia ball and socket type, white, brown or green, with tension clamps for conductor, working pressure 11000 volts, complete all as specified and directed.

Material &Labour for Aluminium Conductor, Steel Reinforced off sizes including binding wire and jumper connect with PG clamp made out of aluminium alloy accodring to IS-617 complete all as specified and directed.

Supply &Fixing of Bus Bar Chamber 4 way with 63 Amp MCCB, Busbar made of ETP Grade Copper, wall mounted Indoor type mounted on porcelain insulator, complete with all necessary connection complete all as specified and directed.( For Offrs Block).

Supply &Fixing of Cable route indicator shown "HT UG cables" painted in brown colour and root of cable with aero made of CI in suitable elliptical shape and fixed in MS flate 50X6mm ,70cm long ( all words embosed) and embaded in PCC block of size 30 x 30 x 60cm in ground complete all as specified and directed.

RAIN WATER HARVESTING WORKS Supply, assembling, jointing, lowering and fixing in position PVC plain casing pipe, heavy duty of size 150mm dia with wall thickness 7.5 to 8.5 mm conforming to IS-4985 having male threads at splgot end and female threads at socket endscrewd and socket type in all jointing accessories complete all as specified and directed.

Supply assembling, jointing, lowering and fixing in position PVC screen casing pipe, heavy duty of size 150mm dia having slot of size 1.5 mm wall thickness 7.5 to 8.5 mm conforming to IS-4985 having male threads at spigot end and female threads at socket endscrewed and socket type in all jointing accessories complete all as specified and directed.

PVC bail plug assembly suitable for 150mm nominal bore PVC casing pipe internally threaded and jointed with casing pipe complete all as specified and directed.

Mild steel housing clamps 1050mm long 200mm wide made out of 12 mm thick MS plate made to shape for 300mm bore casing pipe with necessary bolts , nuts and washers at ground level complete all as specified and directed.

PVC well cap 8mm thick, Suitable for 150 mm bore , having internal threads complete all as specified and directed

Development of injection bore well by using air compressor of suitable capacity and with 25% extra pump capacity removing the drilling mud and finer sediments in the surrounding of borewell screens complete all as specifed and as directed (6 hours for each well)

Supply and packing pea gravel of size 2 mm to 4 mm all around casing pipe and slotted pipe complete all as specified and directed.

PVC cross of size 150mm with 100mm branches heavy duty having internal thread complete all as specified and directed

PVC screened collector pipe having slot of 1.5mm size heavy duty of size 100mm dia complete all as specified and directed.

Drilling pilot bore hole of 150 mm dia by rotary method (Direct/reverse) through rig machine for injection well in any kind of soil strata or rock including disposal of surplus soil/rock to a distance not exceeding 50 metre complete all as specified including depolying required rig machinery , T&P , equipment etc, complete including transporting of all materials like rig machine , tools & plants , collection of log samples (drilling /cutting ) and to maintain drill time log book (for 03 bore holes) complete all as specified and directed.

Reaming of 150mm pilot bore hole to 300 mm bore with direct circulation rig machine / reverse rotary circulation method in any kind of strata of soil /rock from ground level to 100 Metre depth below ground level (for 03 bore holes) complete all as specified and directed.

Precast Cement Concrete Grade M 30 manhole cover SFRC (Steel Fibre Reinforced Cover) factory made including suitable precast RCC frame/collar as per manufacturer's instructions, heavy duty as approved by GE as in cover slabs 100 mm thick and similar articles complete as per site requirement, all as specified and directed .

PVC(SWR) pipes single socketed of 200mm bore ,in any length with rubber ring joints,laid in trenches or floors complete all as specified and directed.

Loose filling with aggregates of broken stone or boulders of gauge 10 to 25 mm in soakage pits, soakage well and in other similar situation complete all as specified and as directed.

INTERNAL ELECTRIFICATION Supply & Fixing of modular fan step regulator 2 module , 120 W suitable for BLDC fans with all accessories including nuts, bolts, clamps etc,all as specfied and as directed

Supply & Fixing for ceiling fans complete with blades, down rods and accessories 230V, 1200mm sweep, five star rated with brushless direct current motor (BLDC) complete in white colour with remote control ,canopy and hanging rod with all accessories including nuts ,bolts, clamps etc, complete all as specfied and directed.

Supply & Fixing Exhaust fan 300mm sweep metal body, heavy duty, Single Phase AC 230/240V with energy efficent motor pre lubricated double wall bearing , min speed 900 rpm copper winding complete with louvers for wall mounting including grouting making hole in the the wall and holding down bolts,nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan complete all as specifed and directed

Vertical Loadline DB 4 ways double door 415 Volts 200 Amps, MCCB as incomer standard bus bar of suitable size and common neutral link all enclosed in standard steel flush mounting type, drilling holes for incoming and out going cables complete with IP-54 all as specified and directed.

RCBO-A type (SPN-2M) 32 Amps 30 mA (In accordance with IS 12640-2 & IEC61009-1) 240 V/415V, 50 Hz with 10 KA short circuit capacity, RCBO is designed for use in domestic, commercial and industrial distributution system at the most downstream circuit for ensuring protection from lakage current short circuit & over load to the user for a particular circuit. In normal use, it is safe to use and free of threat to user as well as to environment complete all as specified and directed.

Supply and fixing 230V, 6 KA 'B' curve miniature circuit breaker (MCB) of single poles SPN current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. complete all as specified and directed.

Supply and fixing 230V, 6 KA 'B' curve miniature circuit breaker (MCB) of single poles SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning. complete all as specified and directed.

Supply & Fixing MCCB, FP, 63A,415 V,16 KA, ICS 50 % and ICU as per IEC 60947-II fixed type complete all as specified and directed.

Material &Labour for inverter type LED bulb 12 Watt 230 Volts AC 50 HZ Retrofit B22 base complete all as specfied and as directed.

Supply & Fixing Exhaust fan 300mm sweep sturdy engineering plastic complete with louver shutter , heavy duty single phase AC 230/240 V with energy efficent motor, pre lubricated double wall bearing , min speed 1200 rpm copper winding complete with louvers for wall mounting including grouting making hole in the the wall and holding down nuts washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan complete all as specifed and directed .

Supply & Fixing new generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluinium housing with high power LED as light source and lense embedded PC Cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bend to shape , including MS clamp of size of required size and PVC cable 1.5 sqmm twincore from ceiling rose to light fittings , complete all as specfied and directed.

Supply and fixing LED light fitting 1x 20W,220V , AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specfied and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2feet, 10 watt 220V AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specfied and directed.

Supply & Fixing telephone socket complete all as specfied and as directed.

Supply & Fixing TV socket complete all as specfied and as directed.

Supply & Fixing electric water storage heater (vertical type geysers) 25 Ltr, 2.0 KW, BEE 5 star 230 volts AC single Phase, including MS glass lined inner tank, glass coated heating element , high density PUF insulation Anode rod protection heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolt, such as safety value, NRV thermostat , plug top & wire fabric at pressure 6Kg/cm2 both side, CP brass 15mm bore coupling or nuts etc as directed as per site requirement , making necessary inlet/outlet water connection and electric connection, testing on load for full satisfaction of Engineer-In Charge. Note: Portable residual current device (16 Amps, 30 mA) shall be provided with each Geysers in lieu of Plug Top. Cost of which is included in overall coated cost by contractor. Any item left out for completion of job is deemed to be included in overall rates quoted.

Supply and fixing kitchen chimney made out of stainless steel working on AC 230V, 50HZ of size 60 cm and with motor of suitable capacity 1000 cum/hr with baffle filters alongwith exhaust pipe of 150mm dia of suitable material (Aluminium /UPVC) for exhaust pipe of chimney including all necessary arrangements for fixing of chimnay complete all as specified and directed.

Material & Labour for earthing complete with galvanised steel earth plate electrode 600mmx600mm x6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.15 meters deep below normal ground level and filled with alternate layers of charcoal and salt with 15 cm thick layer, connected to galvanised wire earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron, 20mm bore GI pipe (medium grade) for watering, 15 mm bore GI pipe (light grade) for protection of earth lead including necessary earth work in any type of soil, earth pit of PCC (1:3:6) type C1 and precast earth pit cover made of RCC (1:1 1/2:3) type A1 duly rein forcement with 8mm dia TMT bar @150mm c/c both ways, one lifting handle made of 8mm dia TMT bar embedded in cover slab complete all as specfied and as shown in Electrical Plate No 3 of SSR Part-1 including testing on completion complete all as specified and directed.

SEWAGE DISPOSAL WORKS H.D.P.E Double wall Corrugated(DWC) pipes (ISI marked) 150 mm bore SN-8 Class as per IS 16098 part II for non pressure underground drainage and sewerage applications with specials including cost of special O rubber ring couplers etc. ,laid intrenches on concrete bed to level/gradient jointing with appropriate class fittings as per manufacturer's instructions including jointing accessories and fittings complete, all as specified and directed. Note- Excavation and Earthwork for this item will be paid separately.

H.D.P.E Double wall Corrugated(DWC) pipes (ISI marked) 200 mm bore SN-8 Class as per IS 16098 part II for non pressure underground drainage and sewerage applications with specials including cost of special O rubber ring couplers etc. ,laid intrenches on concrete bed to level/gradient jointing with appropriate class fittings as per manufacturer's instructions including jointing accessories and fittings complete, all as specified and directed by Engineer-in-Charge. Note- Excavation and Earthwork for this item will be paid separately.

Supplying, aligning & Installation of Precast circular reinforced concrete (M-40) manholes complete with and including S.F.R.C. cover (heavy duty, HD-20 grade designation),conical top (Top portion) of internal dia 0.56 metre at top,internal dia 1.0 metre at bottom,0.80 metre internal depth and bottom solid cylindrical portion 0.30 metre deep, with wall thickness of 200mm Type-I manhole conforming to I.S. 12592, collector for DWC inlet 150/200, DWC outlet 150/200 pipes & future pipes connecting arrangements all as specified and shown on drawing no.SK-1054 Sheet 1/3 . The manholes shall be precast with M-40 concrete grade building in with end caps where shown or necessary, including cost of all materials labours and T&P including Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS :10910 on 12mm dia bar conforming to IS :1786 having minimum cross section as 23X25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification marks to be visible even after fixing including fixing in manhole complete all as directed and specified.

All as per item No 86 here-in-before but having conical top (Top portion) of internal dia 0.56 metre at top,internal dia 1.2 metre at bottom,1.00 metre internal depth and bottom solid cylindrical portion 0.30 metre deep, Type-II manhole conforming to I.S. 12592 with wall thickness of 200mm complete all as directed and specified.

All as per item no. 86 here-in-before but for circular precast reinforced manhole rings only for increase of manhole depth of manhole type-II but for depth more than 1.0 metre upto 2.8 metre complete all as directed and specified. Note:- Various manholes of different depths are to be provided at site as per site requirement .The tenderer shall quote rates for depth beyond 1.0 metre top portion. Actual payment shall be made based on actual depth provided at site for increase in depth for each manhole beyond 1.0 metre depth top portion. Tenderer should note this aspect while quoting rates against this item.

AREA DRAINAGE WORKS Material and Labour for pre-cast factory made SRFC manhole and drain covers/slab of size 600x1200X100 mm thick including reinforcement and MS frame set in cement mortar 1:4 complete all as specified and directed.

ROAD AND PATH WORKS Rolling and consolidating road formation surfaces in cutting with 8 to 12 tonne capacity power roller, watering as necessary including filling in hollows and depression and consolidating to the required level, gradient and camber, complete all as specified and directed.

Providing, Laying, compaction of granular sub-base(GSB) by providing close graded Material confirming to specifications i.e Grading II, conforming to Clause 401 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), mixing in mechancial mixplant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller of capacity 8 & 12 tonne to achieve the desired density, 150 mm thick compacted thickness , complete all as specified and directed.

Providing, Laying, compaction of wet mix macadam (WMM) conforming to Clause 406 of MORT&H Specifications for Road and Bridge Works (Fifth Revision),250 mm thick (compacted thickness, 125 mm thick in two separate layers) with mechanically crushed graded stone aggregates and granular material (size range 53 mm to 0.075 mm), grading of aggregates as per Table 400 -13 of MORT&H specification for road and bridge works (fifth Revision) ,including premixing the material with water at OMC in for all leads &lifts laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and comfacting with vibratory roller of 8 to 12 tonne capacity to achieve the desired density , required gradient and camber etc.,complete all as specified and directed. Notes : 1 . The WMM shall be laid in two layers i.e each of 125 mm thick (Compacted thickness). 2. For payment purpose, both layers shall be considered as one unit.

Preparation of un-surfaced Wet mix maccadam (WMM) surfaces by sweeping clean by power broom or mechanical sweepers and removing completely all loose material and other foreign ad finally fanning the cleaned surface with air compressors to remove all loose dirt etc. and applying evenly a priming coat on un-surfaced mix macadam surfaces conforming to Clause 502 of MORT&H Specifications for Road and Bridge Works (Fifth Revision), with cationic bituminous emulsion SS1 grade,confirming to IS 8887 (latest edition) @ 7.5 kg per 10 sq metres using primer distributor which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed.

Providing, laying & compaction of Bituminous Macadam (BM) 50 mm compacted thickness conforming to clauses 504 of MORT&H specification for Road and Bridge Works (Fifth Revision), using mechanically crushed stone aggregates and granual material etc. of grading II as per table 500-7 of MORT&H specifications for Road and Bridge Works (Fifth Revision) premixed with bituminous binder, bitumen grade VG-30 @ 3.50% (percentage by wait of total mix)prepared in Batch Type Hot Plant of 100-120 TPH capacity transported to site by tippers , laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density complete all as specified and directed. Notes : (i) The contractor shall quote the rate against Item considering 3.5% VG-30 bitumen content. Mix Design for bituminous macadam shall be got designed from NIT/CTL/ Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less than 3.4% by weight of total mix as per clause 504.2.4 of MORT&H specifications (Fifth Revision). (ii) If qty of binder contents is less than the qty as specified in respective items of BOQ , it shall be adjusted at supply only rates of paving bitumen @ Rs 55.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.

Preparation of Bituminous surfaces & applying evenly tack coat of cationic bitumen emulsion (RS-1) conforming to IS 8887 (latest edition) at a rate of application of 2.5 kg/ 10 sqm on bituminous surface as specified in Clause 503 of MORTH specification for road and bridge works 2013 (fifth revision) ,primer distributor which shall be self propelled or towed bitumen pressure sprayer complete,all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Road studs ( Cat eye) of alloy metal body of size 100mm x 100mm x 20mm with PMMA stripiens reflector fitted with epoxy resin and 12 mm dia size 125 mm long pointed nails as per manufacturer instructions complete all as specified and directed.

Preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction and glass beads as per Clause 803 of MORTH specification for road and bridge works 2013 ,complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete, all as specified and directed.

EXTERNAL WATER SUPPLY WORKS Supply and laying centrifugally cast ductile iron pressure pipe 200 mm (8”) bore , spigot and socket ends ISI marked with IS 8329/2000 , Classification K-7 ,in standard length of 5.5-6 metres suitable for and including push on tyton joint with cement mortar lining in the pipes complete all as specified and directed. Note:- Ductile iron fittings will be measured and paid separately.

All as per Serial item 101 above but 150 mm (6”) dia.

All as per Serial item 101 above but 100 mm (4”) dia.

Construction of masonry pits of following size (internal size) sluice valves with sub Class 'B' class bricks straight or curved on plan exc 6 mtrs mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40X40X6 mm frame with fixing hinges, locking arrangement hold fast and handle etc duly paintyed with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation& earthwork complete, all as specified and as shown on drawings.

(a) 1200 mm X 1200mm X 1200 mm

(b) 900mm X 900 mm X 900 mm

( c) 600mm X 600 mm X 600 mm

Supply and fixing of sluice valves CI flanged both ends of size 200 mm dia PN 1.6 complete all as specified and directed.

Supply and fixing of sluice valves CI flanged both ends of size 150 mm dia PN 1.6 complete all as specified and directed.

Supply and fixing of sluice valves CI flanged both ends of size 100 mm dia PN 1.6 complete all as specified and directed.

Taking up DI water mains for 250 mm dia pipe (including all fittings), cutting DI pipes in position and reducing to required length for insertion of new tees of 250X250X200 mm size , branches including all fittings complete all as specified and as directed.

Taking up DI water mains for 200 mm dia pipe (including all fittings), cutting DI pipes in position and reducing to required length for insertion of new teesof 200X200X150 mm size , branches including all fittings complete all as specified and as directed.

Taking up DI water mains for 150 mm dia pipe (including all fittings), cutting DI pipes in position and reducing to required length for insertion of new tees of 150X150X100 mm size , branches including all fittings complete all as specified and as directed.

DI fittings upto 300 mm dia and DI bends (any type, radius and angle) tapers and type, (Straight, bend, increasing decreasing, or double socket etc), reducer, Tee pieces single branch, "Y" junction, double branch, collars, caps plugs and any fittings as required complete all as specified and as directed.

INTERNAL WATER SUPPLY Supply &Fixing wall mixer with L bend compatible for 3 in 1 wall mixers, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe complete all as specified and as directed.

Supply &Fixing sink wall mixer with long swivel spout, fancy type,connecting legs and wall flanges, cast copper alloy, chromium plated, screwed down, high pressure,for 15mm bore of iron pipe complete all as specified and as directed.

WPC MODULAR KITCHEN Supply and fixing of factory made 18 mm thick solid WPC (Wood Polymer Composite) board of density 600 Kg/cum,lead free, plain white colour, as in cup board shelf/ door, fixed with screws, solvent cement/ adhesive to make kitchen /bed room cabinet sides, top & bottom and shelves inside the cabinets complete all as specified and directed.

Supply and fixing of 18 mm thick with min density 600 Kg/cum ,lead free, WPC board of single side rigid laminate of approved color and other side plain white colour fixed with stainless steel screws and solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

Supply and fixing of 5 mm thick with min density 600 Kg/cum ,lead free, WPC board of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

Supply and fixing of auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

Supply and fixing of Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed.

Supply and fixing of D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified and directed.

Supply and fixing of ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified and directed.

Supply & Fixing Stainless Steel 304 grade Basket Cutlery of size 370X485X100 mm premium quality with minimum stainless steel wire 6 mm dia , complete fixed in position complete all as specified and directed.

Supply & Fixing for chrome plated food grade stainless steel wire in any baskets of a moduler kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley, plain basket, bottle pull out etc), min loading capacity 65 KG, made by min 6 mm dia stainless steel round bars, proper welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per design approved, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, SS screw etc complete all as specified and directed. Note : 1. Weight of fitting/fixtures like handles, hinges, ball bearing runners, telescopic channels etc will not be measured. 2. Only weight of SS wire basket will be measured before fixing.

Saru Enterprises Pvt Ltd (BID ID -3334692)

Sood Enterprises (BID ID -3332379)