GE(S) BTD 47 OF 20-21 REPAIR REPLACEMENT OF INTERNAL UNSERVICEABLE POINT WIRING REWIRING REWIRING FITTINGS FIXTURES DBs SUB MAIN WIRING SWITCHES AND CONNECTED ACCESSORIES ZONE G AND H WORKS UNDER AGE EM IV OF GE(S) BATHINDA AT BATHINDA MIL STN

Amount

Taking down carefully to existing copper/Aluminum point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing surface complete all as specified and directed.

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia medium duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' /BOQ ).

All as per srl item No. 2.00 (here-in-before) but socket 3 pin 5 Amp 230 volt flush type on same board complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for one socket point out let 3 pin 5 Amp in independent board complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for call bell point complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for one light point controlled by two two way switch complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed.

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in existing conduit, and existing sunken boxes but including 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed.(Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' ).

All as per srl item No. 8.00 (here-in-before) but socket 3 pin 5 Amp 230 volt flush type on same board complete all as specified and directed.

All as per srl item No. 8.00 (here-in-before) but for one socket point out let 3 pin 5 Amp in independent board complete all as specified and directed.

All as per srl item No. 8.00 (here-in-before) but for call bell point complete all as specified and directed.

All as per srl item No. 8.00 (here-in-before) but for one light point controlled by two two way switch complete all as specified and directed.

All as per srl item No. 8.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed.

S&F Switch piano, flush type single pole, two way 5 Amp complete all as specified and directed.

S&F bell push 5/6 Amps 230 V AC complete all as specified and directed.

S&F Socket outlet 3 pin, 5A, flush type complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 230v AC on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F call bell ding dong type AC 230 V complete all as specified and directed. Make-Anchor, Havells

S&F wall mounted extruded Aluminium/polycarbonate LED batten fixture T8(G13 holder) 1.2 m, including one LED retrofit tube 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete complete including making connection complete all as specified and directed. Note:- Batten and tube must be compatible and of same make. Make of LED tube:- Havells Maxoled(tube) of cat part No LHLDDCXCML8Q020 of Havells or Glaze tube of Surya or equivalent make of crompton/philips Make of Batten:- Maxoled batten of Cat Part No LHFXCENNTN1W020 of Havells or Glaze batten of surya or equivalent make of crompton/philips

S&F wall mounted LED batten fitting 10 (±10%) watt, 6500K, 0.6m, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete includign making connection complete all as specified and directed. MakeE-Lite LED pride plus Cat Part No LHEXACP7IN1W010 of Havells or LED Sleek of surya or equivalent make of crompton/philips

S&F LED 25(±10%)watt light fitting, 6500K, efficacy not less than 90 lumen/watt, pressure die cast aluminium housing with toughened glass cover with IP66 protection complete inbuilt driver & accessories including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection. Make of LED fitting cat part No- ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or Lexon Cat Part No UL25WIP65LXN of Surya or eqvt make in Crompton/Philips.

S&F Lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F LED 5W Lamp, 6500K, base B-22 efficacy not less than 90 lumen/watt complete all as specified and directed. Make :- Adore Cat Part No LHLDEUEEMK8R005 of Havells or Neo Plus of Surya or equivalent make of Syska/Philips.

S&F in 'replacement' sub main two single core PVC copper conductor unsheathed wire multi stranded 6.0 sqmm FRLSH including 20 mm dia concealed PVC conduit, medium grade, ISI marked including Tee, Elbow, Bend etc and including 6.0 sqmm copper conductor multi stranded single core unsheathed wire FRLSH connected by common earth complete all as specified and directed. (Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable along with concealed PVC conduit etc will be measured as one running length)

S&F in 'replacement' sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm in existing PVC conduit pipe and including 6.0 sqmm copper conductor single core wire connected by common earth acomplete all as specified and directed.(Note:- Three lengths of 6 Sqmm cable will be measured as one length).

S&F in 'replacement' sheet metal encloser double door 8 way SPN 230V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed. Make-Legrand/L&T/Scheinder/havells

All as per item No 30 above but 04 way TPN 415 V with provision of FP isolator as incomer and SP MCB's as outgoing complete all as specified and directed

S&F in 'repair' MCB 6-32 Amp SP 10 KA ‘C’ series complete all as specified and directed. Make- Cat Part No 408587-408595 of Legrand or Cat Part No DHMZCSPF006-032 of Havells or equivalent make of L&T/Scheneider

S&F in 'repair' MCB 20-32 Amp SPN 10 KA ‘C’ series complete all as specified and directed.Make- Cat Part No 408615-17 of Legrand or Cat Part No DHMZCSNF020-032 of Havells or equivalent make of L&T/Scheneider

S&F in 'repair' Isolator 415V 63Amp TPN 10 KA ‘C’ series complete all as specified and directed.

S&F in 'repair' Isolator 415V 100Amp TPN 10 KA ‘C’ series complete all as specified and directed.

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable complete all as specified and directed.

ARMAAN COMPLAINT/DAY TO DAY/DOOR TO DOOR COMPLAINTS (From Item No 38.00 to 59.00):- Complaints regarding repair/replacement to these items to be attended unconditionally. All in cost incurred upon deemed to be included in respective items

S&F in 'repair' Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

S&F in 'repair' Switch piano, flush type single pole, two way 5 Amp complete all as specified and directed.

S&F in 'repair' Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed.

S&F in 'repair' Bell push 5/6 Amps 230 V AC complete all as specified and directed.

S&F in 'repair' Socket outlet 3 pin, 5A, flush type complete all as specified and directed.

S&F in 'repair' Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S&F in 'repair' Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

S&F in 'repair' Stepped type electronic fan regulator flush type 230v ACon the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S&F in 'repair' Call bell AC 230 V single pole ccomplete all as specified and directed.

S&F in 'repair' Lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F in 'repair' wall mounted extruded Aluminium/polycarbonate LED batten fixture T8(G13 holder) 1.2 m, suitable for T8 retrofit tube complete including making connection complete all as specified and directed. Make Maxoled batten of Cat Part No LHFXCENNTN1W020 of Havells or Glaze batten of surya or equivalent make of crompton/philips

S&F in 'repair' LED tubelight 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete all as specified and directed. Make Havells Maxoled(tube) of cat part No LHLDDCXCML8Q020 of Havells or Glaze tube of Surya or equivalent make of crompton/philips

S&F in 'repair' Wall mounted LED batten fitting 10 (±10%) watt, 6500K, 0.6m, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete includign making connection complete all as specified and directed. MakeE-Lite LED pride plus Cat Part No LHEXACP7IN1W010 of Havells or LED Sleek of surya or equivalent make of crompton/philips

S&F in 'repair' LED 25(±10%)watt light fitting, 6500K, efficacy not less than 90 lumen/watt, pressure die cast aluminium housing with toughened glass cover with IP66 protection complete inbuilt driver & accessories including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection. Make of LED fitting cat part No- ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or Lexon Cat Part No UL25WIP65LXN of Surya or eqvt make in Crompton/Philips.

S&F in 'repair' decorative wall light fixture made of polycarbonate suitable for retrofit 9W LED lamp(base B-22) complete with PC diffusor & including one 9W LED lamp(base B-22), 6500K, not less than 90 lumen/watt efficacy including making connection complete all as specified and directed.Make of LED lamp:- Havells adore 9W CDL of cat part No LHLDEUEEML8R009 of Havells or Neo plus of Surya or equivalent make of crompton/philips Make of Fixture:- CITY-1 of Havells or HLWB-01-B22 of Halonix or equivalent make of crompton/philips

S&F in 'repair' LED bulkhead light fitting 10(±10%) watt, 6500K, efficacy not less than 90 lumen/watt, complete with & including PC diffusor and inbuilt driver & LED lamps complete all as specified and directed. Make Endura Rugby 10W of cat part No LHEOAOP7PP6W010 of Havells or Sunrise 10W of Cat Part No LBHE-10-CDL of crompton or equivalent make of surya/philips

S&F in 'repair' Hylam sheet cover 3mm thick of size 125mmx125mm complete with machine screw/ washer etc complete all as specified and directed.

S&F in 'repair' Hylam sheet cover 3mm thick of size 125mmx200mm complete with machine screw/ washer etc complete all as specified and directed.

S&F in 'repair' Hylam sheet cover 3mm thick of size 200mmx275mm complete with machine screw/ washer etc complete all as specified and directed.

S&F in 'repair' MS Sunken box of size 100mmx100mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified and directed.

S&F in 'repair' MS Sunken box of size 100mmx175mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified and directed.

S&F in 'repair' MS Sunken box of size 175mmx250mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit of Rs. 1,17,835.00.

unique power & control system

M/S SODHI ASSOCIATES

NASIB ENGINEERS AND CONSTRUCTION

Aman Enterprises

M/s Verma Construction Company