PRESS NIT NO. 14 (M-3) ITEM NO. 3

S/O submersible pump set fitted with dynamical balanced S.S. impellor mounted on S.S. shaft with protection sleeve C.I. stage bowls of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM, suitable for operation on 4 stage, 3 phase, 415-volt 50 Hz AC supply with efficiency 70% at duty point of following duties: - Discharge in LPM – 1600 – 3000 LPM on 66 - 38 Mtr Head, 40 HP.Make: BS/SU / Skope or any other make approved by DJB

S/o submersible cable with copper conductor having three core sizes 16.0mm Sq. working on 1100V SOR 18.10.5Make: -Gloster/ Grandlay/ CCI/ ICC/ Universal/ Havells/ Kalinga/ Finolex/ Polycab

S/o of PVC insulated aluminum conductor armored cable 50 sq.mm having 4 core SOR 18.6.7 Make- Finolex/ Polycab/ Havells/ Grandlay/ Gloster/CCI/ ICC/Universal

Making and supply of 125 MM Dia M.S. orifice assembly suitable Make of pipe: -Jindal/Ganesh/ Prakash/ ISI marked

Making and supply of MS clamp of 600 mm long 12mm thick complete with nut and bolts and washers for holding the 125mm dia pipe including bending and shaping etc. as required

S/o NRV 125 mm dia CI double flanges PN1.0 SOR 4.9.6 Make: - Kirloskar/ IVC / DJB approved make

S/o CI sluice valve,non-rising S.S. spindle, D/F P.N 1.0 of size 125 mm Make:- Kirloskar/ IVC / DJB approved make

Making & Supply of GI bend 125mm dia 90 deg. Double flanged heavy class

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and up to 95 sq. mm SOR 37.1.2

S/o of GI pipe 125 mm dia size, medium class with GI flange welded in both sides 3 Mtr long with MS strips complete with threading work on each side of pipe each flange should have 4 holes and cuts for cables. Make: - Jindal / TATA or any other make approved by DJB.

S/o 10 mm size steel wire rope Usha/ISI Make to hold the pump

S/o required off size threaded nut-bolts of good quality

Supply of MS bore cover 4 mm thick suitable for bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 80mm dia hole in the center.

Making and Supply of G.I tail piece of 125 mm dia., one mtr. Long size made out of Jindal/Parkash/Tata/DJB approved make medium class pipe complete with one end threaded and other end fitted with G.I. flange heavy and cut for submersible cable

Supply of neoprene rubber sheet having 50% neoprene, 3 mm thick Make Jyoti/Worth/DJB approved

Supply of 200 AMP main Switch Make:- Havells / Standard / Bentax

Making and Supply of outdoor type feeder pillar of size 900 X 600 X 350 mm made of 14/ 16 SWG MS sheet 35 X 35 X 3 mm thick angle iron and 25 X 3 mm thick flat iron frame sloping at top cover hang for protection against rain/ weather, pad lock arrangement, breather mesh on both sides with louvers, including connections, interconnections with copper conductor cables, suitable for 1 No. 40 HP motors, painting the feeder pillar with 2 coats of red oxide primer and two coats of superior quality synthetic enamel paint, danger notice plate, sign writing, earthing etc. i/c mounting the feeder pillar on brick masonry pedestal of ammonium 45 cm height above ground level with 3" (75 mm) bed of 1:3:6 cement concrete and cement plaster on the brick portion, providing & fixing following accessories etc. there on as required. 100 AMP ELCB FP 100ma 1 No.250 AMP 50 Ka MCCB 1 No. Extended Rotary Handle 1 No.Rotary Changeover Switch of suitable rating 1 No. Spreader Link 1 Set75 A, TP, Power Contactor 3 Nos.32 A, TP, Power Contactor 2 Nos.1 NO + 1 NC Add-on Aux. Contact Block 1 No. 40 - 60 A, Over Load Relay 1 No.Motor Protection relay 200 MPR 1 No. Star Delta Timer 1 No.24 hour Timers 1 No.Single Phasing Preventer 3 Nos. Push Button 6 Nos. Contact Block 6 Nos.Heavy Duty Capacitor 7.5 KVAR 440 V 63 A, 10 kA, TP MCB 1 No.10 A, 10 kA, TP MCB 1 No.Volt Meter 1 No.CT 100/ 5 A 3 Nos.TP LED Ammeter 1 No. LED Indicating Lights R-Y-G 3 Nos.LED Indicating Lights B 1 No.6 A SP MCB 3 Nos.32 A DP MCB 1 No.ASS & VSS 2 Nos.Phase sequence relayOther material required like insulators, heat shrinkable sleeve, Bakelite, nuts & bolts, aluminum thimbles, ferrules, rubber packing etc. as required.Make of insertions/switchgears: -L&T/BCH/ SCHNEIDER/ MINILEC/AE

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. SOR 35.1.4

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required

Installation of all E&M Equipment, lowering pump set in to the bore all piping work fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size I/C watch and ward cartage, taking all safety measures all tools an tackles testing and commissioning of all E&M equipment at no load and full load conditions as per standard from full satisfaction of Engineer-in-Charge.

Shakti Trading Co.