Providing Aluminium windows for common and corridor area in Kalvarayan, Servarayan and Podhigai Tower blocks Ground plus 12 and providing plastic lattice system for plumbing shafts in Panchaksharam Guest house in Anupuram Township.

Amount

Providing and fixing in position Aluminium partitions, doors, windows, ventilators, louvers, fixed glazing, sliding windows north light glazing, sliding shutter 'E' Channel, trellis, etc., using heavy duty standard anodized aluminium extruded sections, anodized aluminium sheets as per relevant IS code of "JINDAL" or approved equivalent make including pivots, approved door and window handles, door stopper, EPDM gasket, neoprene gasket lining, stainless steel screw, mastic filling, weather strips, washers, reinforcing the door shutters at top and bottom with MS rod threaded and fixed to vertical members, etc., as required and as per drawing etc., all complete at all heights and as directed by the Engineer in charge. NOTE:- 1. Payment shall be made on the basis of weight of aluminium members/section fabricated and actually installed in position without extra allowance for wastage no extra payment shall be made for non-aluminium consumable items like screws, gasket, weather strips PVC/Neoprene lining, sliding wheels for windows, in built tower bolt, reinforcing rods, etc., 2. Glazing, particle boards, Aluminium grills, mesh etc., will be paid separately under relevant items. 3. All fittings except under Note-1 will be paid separately under relevant item and the fittings shall be of matching colour anodized aluminium sections. 4. The aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cleat angles at no extra cost. 5. The aluminium section shall be anodized with "MATT FINISH" (15 micron thick) finishing and of approved shade/colour with the approval of Engineer-In-Charge.

Supplying, fitting, fixing in position of 5mm thickness Tinted glass of approved colour of "Saint Gobain" or approved equivalent make for doors, partition, windows, fixed glazing, louvers, etc., including fixing with putty, TW beading, Neoprene gasket, etc., all complete as per drawing and specifications.

Providing and fixing Sliding window latch for sliding windows of make EBCO or other approved make including fixing with necessary screws as directed by the Engineer-in-charge.

Plastering with Cement Mortar 1:5, 12mm thick for brickwork / Concrete on internal faces at all lifts including scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-in­charge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement]

Plastering with Cement Mortar 1:5, 20mm thick for brickwork / Concrete on its external faces at all lifts including scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-in­charge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement]

Painting all internal faces of walls / plastered surfaces with two coats of Acrylic Emulsion paint of make Asian (Tractor) / Berger (Bison) or other approved equivalent make of approved shade over a coat of interior wall primer of make Asian (Professional) / Berger (BP Primer) or other approved equivalent make including preparation of surfaces, applying approved make wall care putty as per manufacturer specification, sanding the surface, making surface smooth without porous, applying the primer coat, scaffolding, etc., all complete at all lifts as per specifications.

Providing Painting over all exposed surfaces at all heights over plain plaster with Two Coats of premium exterior emulsion paint of make Asian (APEX - Dust proof exterior emulsion) / Berger (Anti dustt weather coat) or other approved equivalent make of approved shade over a coat of exterior wall primer of make Asian / Berger or other approved equivalent make including preparation of surfaces, curing, scaffolding etc., all complete as per specifications.

Supplying, fabricating and fixing Steel work welded in built up sections and framed work at all lifts comprising Chequered plates, MS angles, other structural steel sections, etc., of TATA or SAIL or approved equivalent make including cutting, welding, bending to shape, painting exposed faces with two coats of anti-corrosive paint of approved colour over a coat of red oxide zinc chromate primer / zinc phosphate primer, embedding with Cement concrete, if necessary, etc., all complete as per specifications and drawings. [Note: The rate shall be inclusive of lifting arrangements if any required to hoist and concrete embedment's for fixing the steel works. ]

In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works

Providing and fixing M10 expansion anchor fasteners of make Hilti or other approved make in RCC/ brick masonry at all lifts including drilling hole using hammer drilling or diamond core drilling, cleaning the hole using hand pump for blowing out dust, setting the anchor in position, checking the anchor setting, fixing the steel members with approved thickness of washer and nut, checking the installation, etc., complete all as per manufacturer specifications and as directed by the Engineer-in-charge.

M10 x 153 stud anchor with effective anchorage depth of 80mm of make Hilti [HSA-R-(SS316)] or other approved make for RCC members.

Providing and fixing 5mm thick Polypropylene plastic lattice system of approved design, colour and size at all elevations including fixing with Anodized aluminium frame work or other approved frame work, sealing the joints with required sealants, etc., all as per drawing and specification and as directed by Engineer In Charge. (Note: Rate for frame work with Aluminium will be paid for separately under relevant item)

Providing and fixing double scaffolding system (cup lock type) on the exterior side at all height made with 40mm diameter M.S. tube spaced @ 1.5m center to center at both horizontal and vertical tubes, joining with cup and lock system with M.S.tube, M.S.tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc., and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners connection with the building, etc., Wherever required for the inspection of work at required location with essential safety features for the workmen, etc., complete as per directions and approval of Engineer-in-charge. (Note: The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.)

Providing and fixing of Roller blinds of make Chennai blinds or other approved make including providing dual roller blinds, 100% polyster fabric/PVC of approved colour and pattern, fixing easy fit universal brackets for top, side and face fittings, jointing the fabric with weld wherever required, fixing the roller blinds using rust free aluminium roller tube and sidewinder with nickel operating chain, etc., all complete as directed by Engineer-In-Charge. [Note :- Sample shall be got approved by the Engineer before making bulk order.]

Providing and fixing of PVC horizontal blinds for balcony, door, etc., of make Chennai blinds or other approved make with PVC vanes of approved colour, pattern and size which are suspended from rust free aluminium fittings including fixing the blinds with side winder with nickel operating chain, fixing easy fit universal bracket for top and face fittings etc., all complete as directed by Engineer-In-Charge. [Note :- Sample shall be got approved by the Engineer before making bulk order.]

s venkatesan civil & electircal contractor

SRI MARUTHI CONSTRUCTIONS

Bidder Name

s venkatesan civil & electircal contractor

G.Sudhakar

SRI MARUTHI CONSTRUCTIONS