Work of enhancement of 200KVA Communidade plots DTC to 400 KVA to release total load of 84.46KW to Mrs.Reema J Shirodkar at Sy No. 31/1Plot no.76 Pilerne Bardez Goa under the jurisdiction of Sub Division-II Porvorim, Division-VI Mapusa

cost of material

Outdoor, LV Main Switchboard for 400KVA Transformer centre made of CRCA sheet with PU painted and complete with all accessories and HDGI mounting channels.(double front MS)

GI Tubular Fencing complete with gate and side dismantling system as per the specification for Distribution Transformer and Feeder Pillars (Size 4M X 3M X2M) with concreting for Gl fencing supports with plinth (0.3x0.3x0.5) Cu.m.x12 nos. Each ratio 1:3:6 and brick masonary [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zine coating of 1000 gms/sq.mtr, 140 Microns DFT, suitable for high salinity coastal areas

Centaring and shuttering including struttings,propping etc. and removal of formwork for foundations,footings, bases for coloumns and mass concrete. for transformer 7.62sq.mtrs)

12mm cement plaster 1:4(1 cement:4 fine sand)(for transformer 8.61sq.mtrs)

Providing and laying in position cement concrete 1:2:4 ( 1 Cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing: (for transformer 2.38cu.mtr)

GI Flat 50x6 mm

cost of erection

400KVA,11/0.433KV 3PH Outdoor type oil immersed copper wound level II distribution transformer

Outdoor, LV Main Switchboard for 400KVA Transformer centre made of CRCA sheet with PU painted and complete with all accessories and HDGI mounting channels.(double front MS)

Removing of 200 KVA 11kv/.4kv Distribution Transformers level II losses, Alluminium Winding, with Bimetallic Terminal Connectors, Energy Efficiency Level-II as per IS: 1180 (Part-I): 2014

Single Core XLPE unarmoured, 1.1 KV grade cable 300sq.mm

GI Tubular Fencing complete with gate and side dismantling system as per the specification for Distribution Transformer and Feeder Pillars (Size 4M X 3M X2M) with concreting for Gl fencing supports with plinth (0.3x0.3x0.5) Cu.m.x12 nos. Each ratio 1:3:6 and brick masonary [Galvanising should be hot dipped Galvanised as per IS:2629/66, minimum Zine coating of 1000 gms/sq.mtr, 140 Microns DFT, suitable for high salinity coastal areas

GI Flat 50x6 mm

Removing Structure material

Removing of GOAB switch 400A complete set

Removing and of HG fuse unit 200A complete

Removing and refixing DTC Metering Unit

Removing of 3.5Cx300sqmm XLPE cable

Removing MS Distribution box complete

Removing PVC insulated single core cable 50sqmm for DP earthing.