Upgradation of Direction Office, Circle Office of MHED Jammu along with allied works.

Repair to various door in MHED Complex by way of dismantling of old damaged door along with fixtures and accessories and providing and fitting new factory made door made out of Engineered wood with 35 mm thickness, 7’ x 3’-6” and size depending upon the chowkat and fixed with mica on both sides and ISO Certified 9001-2008/2202 including providing and fitting door accessories like handle, door closer hinges, nails, door latch, door stopper. The job includes cost of material, labour and taxes.

Providing and fixing powder coated aluminium Powder coated aluminium (minimum thickness of powder coated 50 microns and thickness not more than 14 gauge) at main hall on second floor (Direction Office) & Divisional Office, frame for work for partitions with table OF extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, glass 5mm, ACP Sheet 3mm thick all complete as per the directions of Engineer-in-Charge.(Nine number cabin of size 8’x8’x6’)

Providing and fixing 3mm thick ACP(Aluminium Composite Panels of make , shade and finish approved by Engineer in charge on fabricated MS Structure/framework including cutting , routing, grooving, bending and fixing with approved cleats, SS fastener, structural silicone sealant double sided tape and necessary accessories at Main entrance on ground floor. The work shall include edge trims, corner profiles, joint treatment, sealing, flashing, and Finishing too achieve a uniform appearance. Complete in all respects as per Drawing and Direction of the Engineer in-Charge. The complete job includes material cost tool and tackles, labour cost and taxes. Column Roof Slab Railing

For creation of new panel room and partition 9’ x 15’ for reception room at second floor and railing for stairs, Providing and fixing powder coated aluminium(Powder coated aluminium (minimum thickness of powder coated 50 microns and thickness not more than 14 gauge) frame for work for partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, glass 5mm, ACP Sheet 3mm thick all complete as per the directions of Engineer-in-Charge.

Providing / supply, Installation of Pure Sine Wave online UPS 5.0 KVA with following specifications • Single phase in and single phase out • SMF battery type • Adequate Numbers and specification of battery (12V SMF batteries bank) to provide backup of not less than 30 minutes with full load. • form factor 0.8 • IGBT based PWM Technology • 230 V +/- 1% , Single Phase , < 55db • IP 42 • Make: Microtek/Luminous/Numeric

Providing/ Supply & Installation of 42 inch Smart LED 4K along with allied items at Guest House at MHED Jammu office (24x7 Operations) with following specifications • Resolution:3840x2160 or higher • Aspect Ratio: 16:9 • I/O Ports: HDMI2.0x2, HDCP2.2x1,DVI-D, USB2.0x2,Stereo mini Jack, DVI/HDMI/AudioCom • Speaker: inbuilt 2Speakers with 10 Watt each • Make: Samsung/LG/Sony

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth on ground floor and second floor of MHED Complex including necessary repairs to scratches etc.complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface on ground floor and second floor of MHED Complex.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work on ground floor and second floor of MHED Complex.

Repair to table of Chief Engineer’s room of size by way of removing of damaged mica sheet and then fitting of new mica sheet 1mm thick and HDMR with the help of fevicol and heatex on all sides including proiding and fitting of WPC lowers on front side of table, knob, hinges, channels including repair to side and back small tables by employing skilled carpenter and other allied works in room. Job includes cost of material, taxes, to &amp; fro charges and skilled labor charges