Work Contract for Capital and DCW works in Rasingapuram Sub division in Theni EDC

Transporting of Pole from road side to work spot through paddy field, Konica lands, wet lands by head load including loading transporting and unloading up to a distance of 500mtr distance. 7.5mtr / 8.0mtr poles.

Transporting of Pole from work spot to pole pit including loading transporting and unloading up to a distance of 500mtr, 7.5mtr / 8.0mtr poles

Transporting of Pole from road side to work spot through paddy field, Konica lands, wet lands by head load including loading transporting and unloading up to a distance of 500mtr distance. 9.0mtr / 9.14mtr poles.

Transporting of Pole from work spot to pole pit including loading transporting and unloading up to a distance of 500mtr, 9.0mtr / 9.14mtr poles 400kg.

Transporting of poles of all sizes by Bullock cart hand cart with KM / Lead per pole including loading and unloading for all sizes.

For every addl. KM and part thereof.

Loading of conductor to vehicle with conductor full drum.

Unloading of conductor to vehicle with conductor full drum.

Materials loading, unloading with lead above, 20mtr up to 100Mtr leading and stocking complete.

Route surveying and Peg Marking of LT/ HT lines.

Excavation of pole pit for 7.5m / 8.0m poles in all classes of soil including cleaning of site except hard rock (1.25 x 0.8 x 1.5).manual

Excavation of pole pit for 7.5m / 8.0m pole in medium rock and disintegrated rock which require wedging etc. clearing of site extra.(1.25 x 0.8 x 1.83)

Excavation of pole pit for 9.14m poles in all classes of soil, (1.25 x 0.6 x 1.83) except hard rock

Excavation of pole pit for 9.14m poles in medium rock and disintegrated rock which require wedging. clearing of site extra.(1.25x0.8x1.83)

Excavation of Stay pit for stay on all classes of soil (0.95*0.8*1.5m)

Excavation of stay pit for stay in medium rock and disintegrated rock which require wedging etc. clearing of site extra.(0.95*0.8*1.5m)

Excavation of earth pit and erection of earth pipe with salt, coal and earth refilling etc. complete (cost and coal salt Rs.30/-)

Erection of poles 7.5m / 8 RCC, PSC and iron pole for HT / LT Line including shrub, jungle clearance complete etc.

Erection of poles 9.14m and above pole for HT / LT Line including shrub, jungle clearance complete etc.

Erection of Stay set complete including refilling of excavated earth fixing clamp stay rod, Guy insulator, proper binding and Transporting of required materials from road side to work spot.

Fixing of single phase cross arm with insulator etc.

Fixing of 3 Phase Cross arm with insulator.

Fixing of HT V Cross arm & Tapping channel cross arm with insulator.

Fixing of HT / LT T.I .fitting with insulator.

Erection of HT side arm with stud.

Erection of LT side arm stud.

Fixing of Stay guide.

Erection of structure materials complete such as Top channel, seating channel, and belting angle etc.,

Erection of HG fuse set.

Erection of AB switch.

Transformer structure grounding and earthing of structure complete.

Erection of cables bus bar complete for LT bus bar arrangements

Erection of LT open type fuse set including cable jumpering up to the line.

Erection of HT jumpering complete.

Transporting of structure materials AB switch, HG fuse cables, complete to site.

Manufacturing of LT open type fuse complete cutting, drilling etc.,

Erection of Distn Transformer (board staff should normally do this work) If sufficient staff is not available Labours has to be engaged. Total no of staff required is 8 NOS for the above work.

Leveling of transformer structure yard, providing cut stone or bricks etc., (with materials)

Erection of Single pole Transformer Bed.

Erection of Single pole H.G. Fuse set.

LT cable arrangement.

Erection of Plinth for (22 KV) Single pole Structure.

Stringing of line up to 7/2.59mm (ACSR / AAAC) Transporting of conductor to spot, paving of conductor, stringing, sagging and Binding jumpering complete.

Stringing of line up to 7/3.35 and 7/3.66mm (ACSR / AAAC) Transporting of conductor to spot, paring of conductor, stringing, sagging and Binding, jumpering complete.

Stringing of line up to 7/4.09 Transporting of conductor to spot paring of conductor stringing, sagging and Binding, jumpering complete.

Re sagging of all LT lines.

Manufacturing and alteration of all size of back clamps.

Manufacturing and alteration of all size of stay clamps.

Drilling of holes all sizes 1/4” to 3/4” & up to 3/4”.

Drilling of holes above 3/4”.

Earthing of pole including cutting, hooking and binding etc., as per TNEB Std.

Clearing coconut tree branch.

Clearing of other tree branches.

Light jungle clearance in substation premises, shrub clearance in ss premises.

Dismantling of poles in damaged condition and separation of grills and transporting the grill to road side.

Dismantling and re erection of service connection wires S phase.

Dismantling and re erection of service connection wires 3 Phase.

Set righting the leaning poles, Pin point.

Set righting the leaning poles, Cut point.

Transporting failed / Healthy distribution Transformer through Private vehicle to and fro up to 8km.