Supply of Miscellaneous Items

NEOPRENE RUBBER SEAT THICKNESS 2.00MM Size 1Mtr. X 5Mtr

NEOPRENE RUBBER SEAT THICKNESS 4.00MM Size 1Mtr. X 5Mtr

Neoprene Rubber Cord Dia 14.00 mm

Rubber gasket; Size: 1000X1000X2 MM

Rubber gasket; Size: 1000X1000X3 MM

400 NB Neoprene Rubber Gasket for pipe sleeve coupling. (As per sample) Hardness of material: Shore A 75-80

200 NB Neoprene Rubber Gasket for pipe sleeve coupling. (As per sample) Hardness of material: Shore A 75-80

Valve seat of 80NB Double Flap Non-Return Valve used in Bowl Mill Lube Oil Skid. As per sample.

Coupling L-110 Spidex

Coupling L-95 Spidex

Neoprene Rubber Cord Dia 1.00 mm

Neoprene rubber Cord (2 mm dia)

Neoprene Rubber Cord dia 3.00mm

Neoprene Rubber Cord Dia 5.00 mm

NEOPRENE RUBBER CORD DIA 8.0 MM

Silicon Rubber cord: 3 mm

Silicon Rubber cord: 5 mm

HP R1 hose pipe 40 NB X 1 mtr long with end fittings(F) for FD fan (Servo. assy)

HP R1 hose pipe 15 NB X 3 mtr long with end fittings(F) for PA & FD fan (Rotor assy)

HP R1 hose pipe R1 15 NB X 1 mtr long with end fittings(F) for PA fan (Servo assy)

HP R1 pressure hose pipe wire braided;20 NB X 1000 mm long (One end female fitting; other end 90 deg elbow female (F) fitting) for PA Fan Motor NDE inlet

HP R1 Flexible hose pipe;15 NB X 700 mm long (One end female fitting; other end flange fitting (Flange dimensions OD 100 mm; thk 13 mm;04 no 14 mm dia holes) for PA Fan Motor NDE Outlet

HP R1 Flexible hose pipe;15 NB X 650 mm long (One end female fitting; other end flange fitting; Flange dimensions OD 100 mm;thk 13 mm;04 no 14 mm dia holes) for PA Fan Motor DE Inlet

SS Wire braided flexible hose pipe with female end fitting (1/2" BSPx1 Mtr. Long) for ID Fan Bearing housings

Hose assembly 10 mm dia. x2000mm long both side matching connector w.p. 28 bar, Conforming to SAE 100R6

Hose assembly 6.4 mm dia. x1000mm long both side matching connector female swell w.p. 28 bar Conforming to SAE 100R6 / EN854 R6

Hose assembly 6.4 mm dia. X800mm long both side matching connector female swell w.p. 28 bar Conforming to SAE 100R6/EN854 R6

FEEDER GLASS WITH Dual LIP SEAL # Glass - Dia 144.5mm Thk 10mm

SS Hose Assembly two wire braided grade 304 NB - 50 mm x 950 mm Long both side matching Connecter w.p. 20 kg. Temp. 200degC

O ring 163/147 X8; Mat neoprene

O ring 181/165 X8; Mat neoprene

Gasket 184/150X3; Mat neoprene

O ring 115/99X 8; Mat neoprene

O ring 131/115 X8; Mat neoprene

O ring 135/99 X3; Mat neoprene

Insert seal (silicon) for dome valve assembly # Approx dimensions (ID 210mm; OD 280mm; Thickness 33mm) As per sample

"O" Ring (silicon) for dome valve assembly # Approx Dia 320mm Thickness 3mm As per sample

Coupling bolts with nut, washer & bush for PB 180 pin type flexible coupling # Bolt approx length 65mm; OD 12mm; M8 thread; Mat GI; # Bush approx length 32mm; ID 12mm; OD 30mm; Mat neoprene; # M8 Spring washer & nut

Y Type Strainer sieve with 149 # SS mesh 20 NB with threaded ends Filtration medium ISO VG 68

Y Type Strainer sieve with 149 # SS mesh 40 NB; Filtration medium ISO VG 68

Y Type Strainer Sieve with 149 # SS mesh 40 NB; flanged end; Filtration medium ISO VG 68

Filter element for PA fan (as per sample) 60 # SS mesh OD 74 mm ID 40 mm length 222 mm Filtration medium ISO VG 68

Filter element for FD fan (as per sample) 60 # SS mesh OD 150.00 mm ID 79.5mm length 260 mm Filtration medium ISO VG 68

Filter element for ID fan 60 # SS mesh OD 53.5 mm ID 24.4 mm length 95 mm Filtration medium ISO VG 68

Internal Circlip OD 117.5 mm ID 105 mm for tail pulley

Internal Circlip OD 51mm ID 45 mm for Weigh sensing roller

Internal Circlip OD 77 mm ID 68.7 mm for Weigh span roller

Internal Circlip OD 80 mm ID 71.5 mm for Inlet span roller

External Circlip OD 61mm ID 52 mm

Wear sleeve OD 64.90 mm ID 59.20 mm Width 20 mm; Mat G.I, Inner edge chamfered on one side for Head pulley.

O ring 7.00 mm thk; OD 150 mm(approx); Mat neoprene for Head pulley.

Wear sleeve OD 75.00 mm ID 68.00 mm width 17.40 mm Mat G.I for Take up pulley.

O ring 3.00 mm ID 88.00 mm; Mat neoprene for Weigh span roller housing & Inlet span roller housing.

O ring 3.5 mm thk; OD 60.00 mm; mat neoprene for Weigh span roller

Grease seal ID 56.0mm OD 72.8mm for Weigh sensing roller.

Oil Seal 47x28x7

Oil seal metalic 65-90-10

Metallic Oil seal 45-60-10

Oil seal 60X90X10

Metallic oil seal (size 75x95x10mm)

side door sealing gasket for RC feeder

SS Pin (size 10x63mm)

Oil level Indicator 1 "#As per sample

Oil level Indicator 3/4 "#As per sample

SS Pin (size 8x47mm)

OIL SEAL 65-80-8

oil seal 65x90x10

OIL SEAL 65-90-10

OIL SEAL 65-85-10

OIL SEAL 76.2-95.25-9.52

OIL SEAL 65-85-10

Oil seal 3#X3 ¾#X3/8#

Oil seal 2 ¾#X3 ½#X3/8#

Oil seal 40X52X7

Drive study for Grav RCF mat SS 304 L 97.2 mm, OD 22.5mm with nut & spring washer

Head pulley bushing for 36" Grav RC Feeder # Mat Neoprene rubber reinforced by brass cylindrical bush # Length 40mm OD 46mm ID 22.8mm

Grease fittings for raw coal feeders # Flexible male-female connector 1/8"(M) x 1/4"(F) mat: Brass (As per sample)

Grease fittings for raw coal feeders # Connector for Take up Pulley & COC Pulley- 45 deg adapter (both end 1/8"(F) threaded) with 70 mm long (both end threaded 1/8"(M)) mat : CS (As per sample)

Grease fittings for raw coal feeders # Adapter 90 deg with check nut & grease nipple; mat: Mild Steel (As per sample)

Grease fittings for raw coal feeders # Air dispenser bolt with Hex hd. & thread 1/4"(M); mat: Stainless Steel (As per sample)

Grease fittings for raw coal feeders # Male female connector with Hex nipple 3/8"(M) x 1/4"(F); mat: Mild Steel (As per sample)

Grease fittings for raw coal feeders # Male female 1/8"(M) x 1/2"(F) connector; mat: Brass (Female side hexagonal head) (As per sample)

Grease fittings for raw coal feeders#90 deg tube bend witn flexible connectors both ends; mat : Brass (As per sample)

Grease fittings for raw coal feeders # Flexible female-female connector 3/8"(F) x 1/8"(F) mat: Brass both side Hex head (As per sample)

Grease fittings for raw coal feeders # Grease nipple M 10x1.0

Coupling L-110 (As per sample) #1. FD Fan LOP: Pump side bore 24.3mm; key way 4x7 (DxL)#Motor side bore 38mm; key way 4x10 (DxL) [04 nos]#2. PA fan LOP: Pump side bore 19mm; key way 3x6 (DxL)#Motor side bore 38mm; key way 4x10 (DxL) [04 nos]#3. B/Mill LOP: side bore 28mm; key way 4.5x8 (DxL)#Motor side bore 38mm; key way 4x10 (DxL) [10 nos]

Coupling L-95 for Lube Oil Pump of ID Fan (As per sample) # Pump side bore 14mm; key way 2.5x5 (DxL)#Motor side bore 19mm; key way 3x6 (DxL) [04 nos]

Shear key of Premium make COC G Box # Approx length 25mm; bush area OD 9.92mm; thread M 12mm x 1.75 P#Mat EN9 Steel#

Shear key of Elecon make COC G Box # Approx length 28mm; bush area OD 9.92mm; thread OD 13.5mm#Mat EN9 Steel#

Gun metal bush for COC gear box assy.#Approx length 10.80mm; OD 11.90mm; ID 10.00mm#Mat Gun metal

End Door Gasket for 36" Gravimetric RC Feeder

Wear Sleeve for Tension roll pulley for 36" Gravimetric RC Feeder # ID 39.0mm OD 44.8mm width 14.0mm mat GI

M/S ANURAG ENGINNERING WORKS

SHREE SHYAM ASSOCIATES

M/S ANJALI ENGINEERING WORKS

M K ASSOCIATE

Sone Obra Enterprises Pvt. Ltd.

M/S ANURAG ENGINNERING WORKS

SHREE SHYAM ASSOCIATES

M/S ANJALI ENGINEERING WORKS