Loading…
Loading…
Tender ID
Tender Value
₹7.4 L
EMD Value
₹18,600
Closing Date
14 Jan 2026, 9:30 pmClosed
Bengaluru Water Supply And Sewerage Board
Work of providing and laying of 225mm dia SW line at 2nd cross Tunganagara near Ravigowda Enclave comes under Herohalli service station area of AEE NW-4 sub division
BWSSB/2025-26/WS/WORK_INDENT3139/CALL-2
BWSSB/2025-26/WS/WORK_INDENT3139/CALL-2
Open
Water supply/sewage lines
Electronic Documents, First(One Cover)
BWSSB Executive Engineer North West Two
₹500
₹18,600
3 Jan 2026
3 Jan 2026
13 Jan 2026
Work of providing and laying of 225mm dia SW line at 2nd cross Tunganagara near Ravigowda Enclave comes under Herohalli service station area of AEE NW-4 sub division
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Depth exceeding 1.5m, but not exceeding 3 m
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Dismantling the damaged or collapsed Machinehole ,conical in shape, and reconstructing the same for the same dimensions, with machine made wire cut brick in CM 1:4 with ordinary portland cement etc. a...
Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster ...
Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. & 1.9 M depth includ. SFRC F&C
Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. & 1.8 M depth includ. SFRC F&C
Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. & 1.7 M depth includ. SFRC F&C
Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. & 1.6 M depth includ. SFRC F&C
Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. & 1.5 M depth includ. SFRC F&C
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .