Providing and Fixing Open Gym Machine for Ladies in Swami Vivekanand Park, Housing Board Colony, Sector-10 A, Ward No. 23, MCG

Amount

NS Item

Dips/ Chin Up/ Push Ups ( 3 in One Machine ) :- 1. Dimensions (LxWxH) 1400 x 1200 x 2100mm. 2. Fabricated with main post of NB 50mm (G.I) 'C' Class pipe of approved make. 3. Main frame of NB 50mm (G.I) 'C' Class Pipe. 4. Leg support of NB 32mm (G.I) 'C' Class Pipe and other support of NB 25mm (G.I) 'C' Class Pipe. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated using akzo Nobel or equivalent paints of 80-120 micron thick . 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 9. Once the concrete is set, the equipment is fixed on to it . 10. High tensile steel with galvanized nut bolts are used for assembly. 11. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment. 12. Self-explanatory stainless stell lable fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, Transportation, Installation at site with defect liability period of 2 years complete in all respect to full satisfaction of engineer in charge complete in all respect.

"Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40 mm dia and 2.5 mm thick all G.I pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of G.I pipes are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company like SKF to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of G.I pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect.

Twister with Stair Stepper:- 1. Dimensions (LxWxH) 1100 x 800 x 1400mm.2. Fabricated with main post of NB 100mm (G.I) 'C' Class pipe of approved make. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters).3. Twister main frame of MS Pipe 50x 50mm and Handle frame of NB 32mm & 25mm (G.I) 'C' Class pipe.4. Stepper main frame of MS Pipe 96x 46mm and Handle frame of NB 32mm & 25mm (G.I) 'C' Class pipe. 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs.7. Zinc primer paints is applied at all the welding points prior to finishing.8. Foothold made of Co-Polymer Plastic with rounded edges to prevent impect and injury.9. Maintenance free bearings of SKF or equilvalent make duly oil sealed and self-lubricated are used in the equipment manufactured.10. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness.11. Once the concrete is set, the equipment is fixed on to it.12. High tensile stell with glavanized nut bolts are used for assembly.13. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment.14. Self-explanatory stainless stell lable fixed on equipment for ease of use.15. The equipment are fitted with inbuilt limitters to prevent unwanted movements.The rates are inclusive of all taxes like GST, Transportation, Installation at site with 2 year defect liability period complete in all respect to full satisfaction of engineer in charge complete in all respect.

Horse Rider and Air Swing- 1. Dimensions (LxWxH) 1500 x 900 x 1100mm. 2. Fabricated with main post of NB 100mm (G.I) 'C' Class pipe of approved make. 3. Horse Rider main frame of NB 65mm (G.I) 'C' Class pipe Handle support frame of NB 50mm and other pipes of NB 32mm & NB 25mm (G.I) 'C' Class pipe.4. Air Swing leg support frame of NB 50mm (G.I) 'C' Class pipe, Handle support frame of NB 32mm & NB 25mm (G.I) 'C' Class pipe (NB stands for nominal bore i.e. internal diameter of pipe in millimeters).5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs.7. Zinc primer paints is applied at all the welding points prior to finishing.8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored.9. Foothold for Horse Rider made of NB 32mm (G.I) 'C' Class Pipe10. Foothold for air swing made of MS Sheet Metal with rounded edge to percent impact and injury. 11. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly.11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.12. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts made of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.15. High tensile steel with galvanized nut bolts are used for assembly.16. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment.17. Self-explanatory stainless steel label fixed on equipment for ease of use.The rates are including of all taxes like GST. transportation and installation at site of work with defect liability period of 2 years to full satisfaction of Engineer in charge.

Pull Chair and Push Chair ( Two in one ) 1. Dimensions (LxWxH) 1800 x 700 x 1800mm. 2. Fabricated with main post of NB 100mm (G.I) 'C' Class pipe of approved make.3. Seat main frame of NB 50 mm (G.I.) 'C' Class pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) 'C' Class pipe. 4. Handle frame of pipe NB 32mm and NB 25mm (G.I.) 'C' Class.(NB stands for nominal bore i.e. internal diameter of pipe in millimeters.5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs.7. Zinc primer paints is applied at all the welding points prior to finishing.8. Handle bars are provided with high end quality rubber grips.9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.15. High tensile steel with galvanized nut bolts are used for assembly.16. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, transportation and installation in CC complete in all respect.

Bidder Name

Amount

bigprintsports(GSTN-09AAPFB2620L1Z9)

Bijender SIngh(GSTN-NA)

bigprintsports

bigprintsports