SPECIAL REPAIRS TO TOILETS, SANITARY FITTINGS AND ROOF IN CERTAIN SMQs/OMQs AT AF STN UNDER GE (AF) BAGDOGRA

Amount

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings incl ridges complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting any gauge thickness incl Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Demolition of brick work built in Cement mortar or cement lime mortar incl all quoins, arches, pillar etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards/slabs etc any thickness including cover fillets complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but not exc 4 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed.

Taking down cement plaster on brick wall surfaces including reeking out joints hacking for key scrubbing down with water etc and removing the rubbish out of MoD land complete all as specified and as directed.

M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed

M & L for roof truss (framed) or trussed framed purlins, crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces,cleats etc in Fe-410-W (GdeE-250) quality B complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L 10mm thick rendering on brick work or concrete surfaces in Cement mortar 1:6 finish even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over 1.5mm thick Brila/JK wall care putty over a coat of alkali resistant priming complete all as specified and directed.

S&F for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3 mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed.

S&F powder coated aluminium sliding window shutters with frames (consisting of 02 Nos glazed shutters and 01 No gauze shutter) Series -D (25mm), 3 track sliding shutters, duly fitted with neoprene beading, glazing clips, locking device, heat absorbing glass 5.5mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95mm average width of aperture in gauzed shutter and powder coated aluminium grill 4mm dia, 75 x 75mm aperture fixed with standard aluminium beading fixed in outer portion of the chowkat complete all as specified and as directed.

S&F powder coated aluminium ventilators with aluminium frame and suitable lovers consisting of 5.5mm thick figured glass, pin headed type and stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95mm average width of aperture complete all as specified and as directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, antishonage pipe and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repairs, vitreous china Wash hand basin, white , flat back size 550 x 400 mm excluding tabs but including brackets, CP waste coupling & waste pipe complete all as specified and directed.

S&F in repairs, 10 Ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type long body bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way bib taps with elegant knob screwed down high pressure complete all as specified and directed.

S&F in repairs, Chromium plated 15mm bore centre hole basin mixer with extended casted spout with 450mm long braided hoses fancy type complete all as specified and directed.

S&F in repairs, 15mm bore brass CP Wall mixer with long bend pipe for connection to over head shower and fixed complete all as specified and directed.

S&F in repairs, 15mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repairs, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed.

S&F in repairs, 15 mm bore health faucet with 1 mtr tube & hook complete all as specified and directed.

S&F in repairs, brass chromium plated shower rose 125mm size with or with out swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs, corner shelf of PTMT fixed with chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repairs, sheet glass shelf glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with chromium plated brass screws complete all as specified and as directed.

S&F in repairs, CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repairs, CP soap dish fixed to wall with screw complete all as specified and directed.

S&F in repairs, 20mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges fixed with brass screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick with matching highlighter over 10mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Size and design/colour of tiles will be approved by GE) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed in Cement mortar 1:6 as in floor (Size and colour of tiles will be approved by GE) complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of oil bound distemper on wall surfaces complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm each but n.exc 2.00 Sqm complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkats complete all as specified and as directed.

S&F 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed Note: Wire mesh in panels shall be measured separately.

M & L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed.

S&F galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F for 100mm long Stainless steel butt hinges, medium weight, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing with complete accessories all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.

SUNIL DAS AND CO

INDIA DEVELOPMENT CONSTRUCTION

M/S SUNNY ENTERPRISE

M/s Chakraborty Enterprise

HALDER ENTERPRISERS

M/S B K ENTERPRISE

MESSERS D S ENTERPRISE

SHRI P P SHARMA