COMPREHENSIVE MAINTENANCE FOR LIFT AND MOTORIZED SHUTTER GATE AT COD AGRA UNDER GE (WEST) AGRA

Amount

Note for item No.1.0 to 3.0 :- (a) Contractor will use trained man directly employed and supervised by ECE industries Ltd Elevator Division. He should be qualified to keep equipment properly adjusted and will use all responsible care to maintain the elevators equipment in proper and safe operating condition. (b) Contractor will regularly and systematically examine, adjust, lubricate as required or directed will replace all elevator parts except replacement of Traction gear, motor, controller, VVF drife, lift cabin. (c) Contractor will attend to the break downs during our regular working hours, on receipt of information. If the contractor failed to attended the complaint within the 48 hrs, a penalty of Rs 1000.00 per day will be imposed till the rectification of the defect. (d) In case of emergency, contractor will attend to the break downs beyod normal working hours which may be deemed necessary to keep the lift in safe working order. (e) Contractor will periodically equalie the tension on the hoisting to maintain an adequate factor fo safety. (f) Contractor will examine periodicallly all safety devices and perform monthly, quarterly, half yearly and early safety tests as per company norms and submit the same to department. (g) Monthly maintenance of lift shall be carried out by the contractor and 01 month's maintainance will be treated as 01 (One) Job. (h) All other spares like bolts nuts and washers, check nuts and any other minor spares which are not included and required for proper functioning of the system is deemed to be included in the item rate. (j) Any spare part of lift required replacement, labour will be deemed to includeed in this item and parts will be paid as supply only in respective BOQ items.

Supply only nylon roller in top hanger of door for smooth running on top track and nylon gibs at bottom of door panel for smooth guiding of landing door for centre 800 mm clear opening door suitable for 8/13 passenger. complete all as specified and directed. Make :- ECE

Supply only hanger roller suitable for 8/13 passenger complete all as specified and directed. Make- ECE

Supply only door bottom shoe PKS16 suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only VFVR-2 card suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only VMVF-2 card suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only BMO PCB suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only Alarm speaker suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only main card for KDS-100 with FRC cable suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only SMPS, 5 Volts suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only contactor 18 Amp suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only relay base only suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only landing roller suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only transformer T-500 suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only break magnet (TMB-40)/80 VDC suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only break coil (TMB-40)/80 VDC suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only break Arm assembly (TM-40F) suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only break shoe liner (TM-40F) suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only Car door contact (Kit), 1 No/1 NC suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only Door Reed switch suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only Car guide shoe liner 16 mm suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only Car and landing hanger roller suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only V-belt for door motor (V56) suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only ARD upto card suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Supply only Roller limit switch suitable for 8/13 passenger complete all as specified and directed. Make-ECE

Overhauling / maint of electromechanical assy of the shutter comprising of Motor 1.5 KW/2 HP, 415 Volts, 415 RPM by washing the system with keronsene, applying suitable quantity of gerease for the free movement of the parts including replacement of the unserviceable ball bearing (cost of ball bearing will be paid separately under respective item. complete all as specified and directed. Note :- (i) Overhauling of one electromechanical assy of the shutter comprising of Motor will be treated as one Job. (ii) All other spares like quarter pins, bolts nuts and washers, check nuts and any other minor spares which are not included and required for proper functioning of the system is deemed to be included in the item rate.

Servicing the operating mechanism consisting of operating gear assembly,gear shaft,gear box, bevel gear, driving rod, limit switch etc inspecting the system for their servicebility removing the old grease and applying new grease, replacement of worn out parts if any tighening of electric connections greasing of motor bearings, motor and accessories immediately after taking over for maintenance and repairs, attending complaints as and when required basis on demand. complete all as specified and directed. Note :- (i) Overhauling of one shutter will be treated as one Job. (ii) All other spares like quarter pins, bolts nuts and washers, check nuts and any other minor spares which are not included and required for proper functioning of the system is deemed to be included in the item rate.

Replacement of existing unserviceable gear box with new gear box made out of 1 mm thick mild steel sheet including with painting two coats of synthetic enamel paint over a coat of red oxide primer, size of gear box 15 cm x 15 cm x 15 cm complete all as specified and directed

Supply only gear assy for gear box suitable for existing rolling shutters complete all as specified and directed.

Supply only ball bearing suitable for existing rolling shutters part No. SKF6203 complete all as specified and directed.

Supply only ball bearing suitable for existing rolling shutters part No. SKF6204 complete all as specified and directed.

Supply only ball bearing suitable for existing rolling shutters part No.SKF6207 complete all as specified and directed.

supply and fix in repair new varum gear assembly complete including lock nuts and keys as per the existing for the storage sheds. Reinstalling the gear box assembly in position greasing and testing for its satisfactory function all as directed at site by Engr-in-Charge.

Dismentling by cutting and removing and taking down the unserviceable shutter driving rod solid 25 mm dia (high carbon steel) for opening and closing including check nut and locknut complete with necessary welding and fixing arrangements as existing all as directed and specified by Engr-in-Charge.

Dismentling and taking down the unserviceable worn out bevel gear/ spur gear and supply and fix new bewel / spur gear as perb the existing size for operation of rolling shutter all as directed at site.

M&F for dismantling rewinding, overhauling packing and refixing of 1.5 KW, 3 phase motor after opening carefully and stripping all parts cleaning removing defective burnt winding. Rewinding the motor with super enamelled copper conductor of the existing guage and number of turns as per the original winding pattern of the manufacturer varnishing with quick dry varnish drying it properly oiling and greasing of moving parts, assembling, reinstalling testing on completion complete all as specified and directed.

supply and fix in repair Spring for rolling sutter complete all as specified and directed.

supply and fix in repair lever for rolling sutter complete all as specified and directed.

supply and fix in repair Fali for rolling sutter complete all as specified and directed.

supply and fix in repair Machine gear box for rolling sutter complete all as specified and directed.

supply and fix in repair set of current collector bracket, Cable trolley single wheel, buffer, Hanger Clamp, Jointer cover, indicating lamp for pendent for rolling sutter complete all as specified and directed.

supply and fix in repair travelling flexible PVC insulated multistranded copper conductor 4 sqmm 1100 volts grade. complete all as specified and directed.

sanjay prabhu (BID ID -3267581)