PROVN OF CERTAIN REPAIRS/REPLACEMENT (MAINTENANCE) E/M WORKS AT ARMY AREA COIMBATORE AND MADUKKARAI UNDER AGE (I) COIMBATORE

Amount

Excavation in trenches not exceeding 1.50m deep and not exceeding 1.5m width in soft/loose soil for taking out / laying of pipe line complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed.

Removal of excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Taking out / up / down from trenches /walls /floors of galvanised steel tubings and connections of following sizes complete all as specified and as directed.

a) Bore of pipe 15 mm dia

b) Bore of pipe 20 mm dia

c) Bore of pipe 25 mm dia

d) Bore of pipe 40 / 50 mm dia

e) Bore of pipe 80 mm dia

f) Bore of pipe 100 mm dia

Supply and laying in trenches galvanised steel tubings medium grade with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends, tees, reducers, short pieces, unions, caps, plugs etc. including clamps connection cutting screwing , drilling etc including connections of following sizes complete all as specified and directed

a) Bore of pipe 15 mm dia

b) Bore of pipe 20 mm dia

c) Bore of pipe 25 mm dia

d) Bore of pipe 40 mm dia

e) Bore of pipe 50 mm dia

f) Bore of pipe 80 mm dia

g) Bore of pipe 100 mm dia

Note: 1. Excavation and earth work will be measured and paid separately 2. Suitable size of Union will be provided at all branches tees joints and at a maximum distance of 30 RM of straight pipe and rates are deemed to be included in the rate quoted above for ease in maintenance.

Supply and fixing on walls, floors, roof, ceilings galvanised steel tubings medium grade with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends, tees, reducers, short pieces, unions, caps, plugs etc. including clamps and connections of following sizes all as specified and directed

a) Bore of pipe 15 mm dia

b) Bore of pipe 20 mm dia

c) Bore of pipe 25 mm dia

d) Bore of pipe 40 mm dia

e) Bore of pipe 50 mm dia

f) Bore of pipe 80 mm dia

Supply and fixing Gun metal globe valves with iron wheel head screwed both end for iron pipe the following sizes complete all as specified and as directed

a) 15 mm bore

b) 20 mm bore

c) 25 mm bore

e) 40 mm bore

f) 50 mm bore

Supply and fixing Non return butterfly valve with iron wheel head screwed both end for iron pipe of 50/80 mm bore complete all as specified and as directed

Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for the following sizes complete all as specified and directed:-

a) 80 mm dia complete

b) 100 mm dia complete

a) 150 mm dia complete

b) 200 mm dia complete

Supply and replacement of DOL starter MK I suitable for electric pump set motors 5 HP cap 3 phase 415volts, Automatic star Delta starter with D range contactor & Robusta comprising of main star delta contactor timer, overload relay complete including taking out old unserviceable starter complete. Note :- The rate coated above are deemed to be included the cost of minor alteration to the panel for fixing of above starter complete.

Supply and fix Foot valve of Brass, Plunger type, heavy duty suitable for 100 mm dia pipe line, including replacement of old unserviceable foot valve of any type and size from suction pipe of pump set all as directed by engineer in charge.

Supply and fix Foot valve of Brass, Plunger type heavy duty suitable for 50 mm dia pipe line, including replacement of old unserviceable foot valve any type and size from suction pipe of pump set all as directed by engineer in charge. Note for Item 11 & 12:- The rate coated above deemed to be included the cost of minor alteration to the pipe for fixing of above foot valve complete.

Supply and connect PVC insulated water proof multi stranded copper conductor cable, 3 core, 6 sqmm, 1100 volts grade, ISI marked including disconnecting dismantling taking out old unserviceable cable from LT panel to submersible pump motor set in bore well all as directed and specified by engineer in charge.

Supply of chlorinated water testing Kit with coloured sample complete with all testing fitments and OT solution in rexine finish / wooden box/ PVC box complete.

M&L for testing of water sample collected from the taken over point at madukkarai and Coimbatore and tested in an authorised state government lab and obtain the water testing report and submitted to the AGE(I) office as directed by the Eng-in-Charge. Note:5 Ltr Bottle required for collecting the sample need to be provided by the contractor.

M&L for preparation of new steel surface over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of Old treated steel surface over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation/cleaning of old painted steel surfaces of any description such as electric motor operator pumps set and base plates, its foundation including suction/deliver GI Pipe line up to ground level writing of SM No.etc all as per colour code or as directed. Note:- One job includes Two Sets of pump and pipe line of suction and delivery and other connected items all above at one installation including writing of block stencil cut MES No.2 cm height complete all as specified and as directed.

Site clearance by cutting of shrubs, cutting of grass, bush weed, trees, sapling not exceeding in 30 CM girth and removal of grass with roots and leveling area and removal of same outside not more than 50m complete all as specified and as directed.

Supply and replacement of star delta starter fully automatic suitable for electric pump set motors 10 HP cap, 3 phase, 415volts, comprising of main star delta contactor, timer, overload relay including taking out old unserviceable starter complete. Note : The rate coated above are deemed to be included the cost of minor alteration to the panel for fixing of above starter complete.

M&L for cleaning of RCC UG water storage sump / ground level tank by pumping out dirty water & removing all sludge, dirt silt etc from walls and floor of the tank & treating the wall with bleaching powder, rubbing scraping walls and floor with the wire brushes and taking out all silt, sludge and dirt from the sump and depositing to a distance up to 50 meter and after primary cleaning the empty sump shall be cleaned further with mixture of fresh water and potassium permanganate at the rate two percent with water & washing the sump shall be continued till water stored in the tank looks clear and then applying two coats of lime wash inside the sump and painting of outer doom / top by means of white wash and writing the date of cleaning and capacity of sump of size of letter 4" with White synthetic enamel paint over Black synthetic enamel paint patta of suitable size, distinctively and area cleaning including removal of bushes, unwanted plants and grass with roots around 50mtr all the sides from the UG reservoir of the following capacity complete all as directed by Engr in Charge:-

(a) 50000 Glns capacity

(b) 100000 Glns capacity

(c) 6000 Glns capacity

(d) 10000 Glns capacity

(e) 5000 Glns capacity

M&L for cleaning of RCC overhead water storage tank by removing all sludge, dirt silt etc from walls and floor of the tank & treating the wall with bleaching powder, rubbing scraping walls and floor with the wire brushes and taking out all silt, sludge and dirt from the sump and depositing to a distance up to 50 meter and after primary cleaning the empty tank shall be cleaned further with mixture of fresh water and potassium permanganate at the rate two percent with water & washing the tank shall be continued till water stored in the tank looks clear and then applying two coats of lime wash inside the tank and writing the date of cleaning and capacity of Tank of size of letter 4" with synthetic enamel paint (white) over Black synthetic enamel paint patta of suitable size, distinctively including preparation of base and area cleaning including removal of bushes, unwanted plants and grass with roots around 50mtr all the sides from the OH reservoir of the following capacity complete all as directed by Engr in Charge :-

(a) 50000 gallons capacity on 20 mtr staging at Madukkarai

(b) 25000 gallons capacity on 15 mtr staging

(c) 5000 gallons capacity on 15 mtr staging at Madukkarai

Supply and fix in replacement ball valves made out of PVC with polythene float and fly nut of the following size of pipes complete all as specified and directed

(a) 25 mm bore

(b) 20 mm bore

(c) 15 mm bore

M&L for lifting and dismantling the submersible pump set 12.5 HP capacity by dismantling pumps and motor and replacement of worn out spares of pumps and reassembling the same and testing complete all as specified and as directed.

M&L for rewinding of 12.5 HP, AC three phase, Submersible monoblock motor with super enameled copper wire of same wire gauge and turn out old burnt out wire with insulating material including varnishing, turning and polishing to the shaft and or rotor, including replacement of suitable size of bearing etc complete all as specified and as directed.

Supply only the following parts of 12.5 HP submersible Motor complete all as specified and as directed. Note:- fixing of parts are deem to be included in item No 24 here-in-before

(a)Thrust bearing plate

(b) Assembly for coupling sleeve

(c ) Winding protection set

(d) Motor bearing bush

(e) sand guard

M&L for dismantling the submersible pump set 7.5 HP capacity by dismantling pumps and motor and replacement of worn out spares of pumps and reassembling the same and testing complete all as specified and as directed.

M&L for rewinding of 7.5 HP AC three phase Submersible motor with super enameled copper wire of same wire gauge and turn out old burnt out wire with insulating material including varnishing, turning and polishing to the shaft and or rotor, including replacement of suitable size of bearing etc complete all as specified and as directed.

Supply only the following parts of 7.5 HP submersible Motor complete all as specified and as directed. Note:- fixing of parts are deem to be included in item No 27 here-in-before

(a) Impeller brass

(b) Stage bowl

(c ) Bowl fixing bolt steel and nut with washer

(d) Bearing sleeve

(e) Shaft nut with washer

(f) Casing wear ring

(g) Strainer

M&L for dismantling of mono block pump set three phase & segregating to its parts for repairs and rewinding of motor with super enameled copper wire of same wire gauge and turn of old burnt out wire with insulating material including varnishing, turning and polishing to the shaft and or rotor, including replacement of suitable bearing ( if required ) etc complete & refitting motor after completion of work including testing of motor of 5 to 10 HP capacity complete all as specified and as directed.

Supply and fix in repair and replacement of the following parts suitable for 5 to 10 HP monoblock pump set complete all as specified and as directed.

(a) Bearing

(b) Terminal plate with brass nuts ,washers

(c) Shaft

(d) Impeller

M&L for desilting the bore well casing of size up to 150mm bore by flushing out till clear water is obtained, for depth not exceeding 150m of tube well by means of compressor complete all as specified and as directed.

M&L for replacement of voltmeter digital type 0 to 500 volts (100x100mm size) including making connection with suitable size of cable all as specified and directed by Engr-In-charge

M&L for replacement of Ammeter digital type 0 to 50 Amps 415v (100x100mm size) including making connection with suitable size of cable all as specified and directed by Engr-In-charge

Supply only High strength calcium based granular chlorination chemical of White granules Granular size: (Mess passing through -100 BSS) 1:1 (=0.1%) Water/Moisture : 5.00 (0.2%) other insoluble calcium salt : 1.1 (+0.1%) mercury and other heavy metal containment: BDL. Strength of items of quantity of chlorination chemical required to obtain free chlorine of 1 PPM per one lakh liters of water. chlorination chemical must contain acceptable level of granular size to avoid exit complete all as specified and as directed.

Supply only liquid chlorine ( sodium hypo chloride) of 70 GPH complete all as specified and as directed.

M&L for cleaning and removing all scale, dirt etc from RCC/AC/Ferro cement water tanks and mouth of circular pipes, following capacity of tanks including writing letters or figures (Block, Roman, Italic or Indian ) not exceeding 15cm high (Example: Cleaned on 05 JAN 2020) complete all as specified and as directed.

(a) up to 250 lit Capacity

(b) 500 lit Capacity

(c) 1000 lit Capacity

(d) 1500 lit cap to 2000 lit Capacity Note for item No 37:- Detailed procedure of cleaning the water tank is as below:- a) Remove all water from the water tank and then desilt the tank. b) All walls & floor of the tank should be scrubbed thoroughly with detergent powder. c) Then the tank is again filled with fresh water & bleach powder is to be added in the dose 4-5 gram per 1000 liters

S&F cover for sintex tank of 200/500/1000 lit capacity made of polythene with all accessories all as specified and directed by Engr in charge

M&L for MS plain black sheet 1.60mm thick for covering top of water tank staging valve chamber cover cut to size hole & punching including riveting welding as required complete fixed in repairs

M&L for preparation/cleaning of old painted steel surfaces of Valve chamber cover, pipe line, pump house doors/window etc. and applying one coat of synthetic enameled paint complete all as specified and as directed by Engineer-in-Charge

Dismantling from foundation base frame by disconnecting, suction/delivery lines & coupling, opening and re-assembling after repairs & welding as required of centrifugal pump set 10 HP capacity model 6 UP4 make Kirloskar and replacement of worn out spare parts as mentioned under respective item here in after

Supply and replacement of following spare parts for centrifugal pump of 10 HP capacity model 6 UP 4 (1600 GPM) required to be replaced under item No 41 above Make – Kirloskar or techno-commercially equivalent.

(a) Pump shaft stainless steel

(b) Impellor CI complete with impellor key

(c) Shaft sleeve bronze with locking screw & lock nut

(d) Bearing No 6309 make – SKF/NBC

(g) Set of ‘O’ ring

(h) CI gland cap with eye bolt

(j) Split lantern ring CI

(l) Gasket set

Supply and fixing of on load change over switch conforms to IS/IEC 6094-3 range 63 A, 415V 50 Hz version 4P modular construction positive isolation in open execution type all as per specified and directed by engr in charge. Make:- Make : C&S cat part No CSCS63NM4CO or techno commercially equivalent

Supply and fixing Motor starters for submersible water pump set Heavy duty DOL starter type DX-P with robust 4 pole contactor & LR1D OLR in S.S enclosure suitable for 5 HP 3 phase all as specified and directed. Make:- C&S cat pat No : BE1-DXP204312 or techno commercially equivalent

Supply and fixing Motor starters for submersible water pump set Heavy duty DOL starter type DX-P with robust 2 pole contactor overload relay type LR7D & S.S enclosure suitable for 0.5 to 3 HP single phase AC2D with wide band operating coil all as specified and directed. Make : C&S cat pat No : BE1-ASA2525MU222 or techno commercially equivalent

M&L for disconnecting electric connection from burnt out timer and remove the same and provn of timer and making connection as per original all as specified and as directed. Make:- L&T, ANALOG TIME SWITCH FM/1 QUARTZ cat part No. J648 B1 or techno commercially equivalent

M&L for disconnecting electric connection from burnt out contactor and remove the same and provn of contactor and making connection as per original all as specified and as directed. Make:- L&T, type MNX 40 3pole contactor of cat part No. CS94190 or techno commercially equivalent

M&L for Run lead Joint including good quality spun yarn in Joints for 80 MM bore CI pipe spigot and socket end pipe on National Highway four track Road in front of unit Main Gate complete including road Cutting, making good and paying road cutting fee to the local authorities etc., complete all as specified and as directed by Engr-in-Charge

M&L for servicing of split type AC unit of any capacity/any make by removing dust with suitable method, cleaning of air filters, tightening of loose wire, nuts, bolts, washers, servicing of condenser motor/ blower, by oiling, greasing, required welding/bracing, replacement of worn out rubber bushes of condenser motor, setting of grill alignment & knobs, Checking for any leakages, provision of thermo coal for air tightness, testing etc complete all as specified and as directed.

Removing the unserviceable compressor from Split type AC and supply and fix new compressor suitable for 1.5 Ton split type A/C all including fixing in original position, connecting up, testing, gas charging, pressure testing, cleaning, condensing and cooling coils, welding, bracing and also including required length of capacity tube and strainer/filter and painting of base plate complete all as per existing one and all as specified and directed by Engr-in-Charge. (charging of gas shall be measured and paid separately)

Removing the unserviceable compressor from Split type AC and supply and fix new compressor suitable for 2 Ton split type A/C all including fixing in original position, connecting up, testing, gas charging, pressure testing, cleaning, condensing and cooling coils, welding, bracing and also including required length of capacity tube and strainer/filter and painting of base plate complete all as specified and as directed. as per existing one and all as specified and directed by Engr-in-Charge. (charging of gas shall be measured and paid separately)

Charging of gas refrigerant in split type AC 1.5/ 2 ton capacity of any make including flushing down refrigerant system with nitrogen gas, checking the leakage and rectification of any defect complete all as specified and directed.

Supply and fix in replacement blower motor/condenser fan motor suitable for split type AC 1.5/2 Ton out door unit single ended or double ended shaft as per existing one complete all as specified and as directed.

Supply and fix in repair condenser coil made up of copper tubing and copper/aluminium cooling fins all as per sample and as suitable for 1.5/2 Ton capacity split type AC complete all as specified and as directed

Replacement of starting capacitor suitable for split type AC capacity up to 2.0 ton complete all as specified and as directed.

Supply and fix in repair running capacitor suitable for split type AC up to 2.0-ton capacity complete all as specified and as directed.

Supply and fix in repair thermostat switch suitable for spilit type AC 1.5/2.0 ton capacity with temperature differential 2.5 + 1 C and working range 15 C to 30 C complete all as specified and as directed.

Supply and fix in repair starting relay suitable for spilit type AC 1.5/2.0 ton capacity complete all as specified and as directed.

Supply and fix in repair overload protector suitable for spilit type AC 1.5/2.0 ton capacity complete all as specified and as directed.

Supply and fix in repair cable PVC insulated sheathed 3 core 70/0.0076 complete all as specified and as directed.

Supply and fix in repair split valve ¼” for split AC 1.5 ton capacity complete all as specified and as directed.

Supply and fix in repair compressor shut off valve 3/8” for split AC 1.5 ton capacity complete all as specified and as directed.

Supply and fix in repair Puff insulation of copper pipe 3/8” (ID) for split AC with white tape complete all as specified and as directed.

M&L for Charging of gas refrigerant in refrigerator of capacity 286/ 300 ltrs of any make including cleaning of suction and discharge refrigerant line with CRC solution and checking and testing the all leakage of gas complete all as specified and as directed.

Supply and fix in repair MCB SP 20 to 32 Amps, 10 KA in SP&N plug and socket board of window/ split AC complete all as specified and as directed.

Supply and fix in repair door gasket of refrigerator with new door gasket as per existing size and refitting the same complete all as specified and as directed.

Supply and fix in repair remote sensing electronic panel of indoor unit suitable for 1.5/2 Ton AC complete all as specified and as directed.

M&L for disconnection of all electric connection and removing the inner and outer unit of the spilit type Air conditioner of capacity 1.5 ton and fixing the same at new location as directed with necessary making hole of suitable size and inserting PVC pipe of size 80 mm up to wall thickness for connection of copper pipe and wire on wall of stone masonry /brick masonry wall including provision of 2nos outer unit mounting bracket complete all as specified and as directed.

Removing the unserviceable compressor from water cooler and supply and fix new compressor suitable for40/80/150Ltr capacity of water cooler including fixing in original position, connecting up, testing, gas charging, pressure testing, cleaning of cooling coils necessary welding/ brazing and including required capillary tube complete all as specified and directed.

M&L for charging of refrigerant after cleaning the suction and discharge pipe with CRC solution and removing the leakage in water cooler of 40/80 ltr capacity complete all as specified and as directed.

Supply and fix in repair starting capacitor for water cooler of 40/80 ltr capacity including testing connecting complete all as specified and as directed.

Supply and fix in repair over load relay suitable for water cooler of 40/80 ltrs capacity including testing, connecting and commissioning complete all as specified and directed.

Supply and fix in repair condenser fan motor single-phase 230 volts 1/16 HP 50HZ suitable for water cooler of any make including testing and connecting all as specified and directed.

Supply and fix in repair thermostat switch suitable for water coolers of 40/ 80 ltrs capacity connecting and testing complete all as specified and as directed.

Supply and fix in repair CP brass water tap self-closing type of existing model and size 15mm dia suitable for water coolers of any make and type complete all as specified and as directed.

Supply and fix in repair float valve assembly with brass ferrule 15mm dia and PVC ball suitable for water cooler up to 40/80 ltrs complete all as specified and as directed.

Taking out the back shutters of water cooler, cleaning, servicing the fan motor of water cooler complete including oiling/greasing tightening the screws etc including cleaning of water storage tank complete all as specified and as directed

Painting of water cooler externally only with one coat of synthetic enamel paint of existing shade and approved make after cleaning the spots/dust etc complete all as specified and as directed. Note : The painting shall be done by means of compressor spray gun at site only.

Supply and fix in repair starting relay suitable for water cooler up to 150 ltr capacity including testing / connecting complete all as specified and as directed.

Supply and fix in repair PVC water connection pipe with brass check nuts and washer complete all as specified and directed.

Supply and fix in repair Metal clad Plug in Socket board complete with MCB SP 20 Amps, 10 KA, for window/split AC and taking down old unserviceable board of complete all as specified and as directed.

Supply and fix in repair PCB of voltage stabilizer of capacity 4 KVA including taking down the unserviceable one complete all as specified and as directed.

Supply and fix in repair PCB of voltage stabilizer of capacity 5 KVA including taking down the unserviceable one complete all as specified and as directed.

Supply and fix in repair single phase 220/240 Volts transformer for 4/5 KVA voltage stabilizer complete all as specified and as directed.

S&F Spin on Filter for lubricating of DG Set of capacity up to 40 KVA complete all as specified and as directed.

S&F Spin on Filter for lubricating suitable DG set of 10 KVA DG set complete all as specified and as directed.

S&F Primary Filter element of DG Set of capacity up to 40 KVA complete all as specified and as directed.

S&F Primary Filter element suitable for 10 KVA DG set complete all as specified and as directed.

S&F Secondary Filter element of DG set of capacity up to 40 KVA complete all as specified and as directed.

S&F Secondary Filter element suitable for 10 KVA DG set of complete all as specified and as directed.

S&F Main element for Air Cleaner of DG set capacity up to 40 KVA complete all as specified and as directed.

S&F Main Element for Air Cleaner of capacity up to 10 KVA DG set of complete all as specified and as directed.

S&F Timer 230 V of model EAPL for AMF panel complete all as specified and as directed.

S&F Relay 230 V, 5A, 3 C/O-MPC of complete all as specified and as directed..

S&F Charger for AMF Panel 12 V, 10 A complete all as specified and as directed.

S&F Battery lead terminal of brass heavy duty with necessary shouldering complete all as specified and as directed.

S&F top up battery electrolyte water to maintain specific gravity complete all as specified and as directed.

Dismantling of Self Starter from DG Sets and servicing the same with replacement of worn out spares and greasing complete with replacement of bushing, bearing, bendex, armature, carbon brush set, back plate etc complete all as specified and as directed.

Supply and replacement of Armature of self starter as per original fitted in the starter of DG set of capacity up to 40 KVA complete all as specified and as directed.

Supply and replacement of Bendex assembly of self starter as per original fitted in the starter of DG Set. capacity up to 40 KVA complete all as specified and as directed.

Supply and replacement of Carbon brush set of self starter as per original fitted in the starter of DG Set capacity up to 40 KVA complete all as specified and as directed.

Supply and replacement of bearing of self starter as per original fitted in the starter of DG Set capacity up to 40 KVA complete all as specified and as directed.

Supply and replacement of Bush set of self starter as per original fitted in the starter for DG Set capacity up to 40 KVA complete all as specified and as directed.

Supply and replacement of bearing housing cover of self starter as per original fitted in the starter for DG Set of capacity up to 40 KVA complete all as specified and as directed.

M&L for disconnecting the Inlet and outlet hose connection and cleaning & de-scaling of radiator complete by using suitable chemical (MAC Solution) and injecting water with high pressure to all line and cleaned with blower motor so as to remove all dirt's in the lines and complete all as directed for DG Set of capacity up to 40 KVA complete all as specified and as directed.

Supply and fix radiator assembly suitable for Mahendra Make DG set of capacity up to 30 KVA complete all as specified and as directed by Engr in charge.

Supply and fix radiator assembly suitable for Mahendra Make DG set up to 40 KVA complete all as specified and as directed by Engr in charge.

Dismantling of Alternator from DG Sets and servicing the same with replacement of worn out spares and greasing complete with replacement of Rotor, Regulator, bushing, bearing, diode, carbon brush set, etc complete all as specified and as directed.

Supply and replacement of Rotor of Alternator as per original fitted in the starter of capacity up to 40 KVA DG Set complete all as specified and as directed.

Supply and replacement of Regulator of Alternator as per original fitted in the starter of capacity up to 40 KVA DG Set complete all as specified and as directed.

Supply and replacement of Carbon Brush of Alternator as per original fitted in the starter of capacity up to 40 KVA DG Set complete all as specified and as directed.

Supply and replacement of bearing of Alternator as per original fitted in the starter of capacity up to 40 KVA DG Set complete all as specified and as directed.

Supply and replacement of Diode of Alternator as per original fitted in the starter of capacity up to 40 KVA DG Set complete all as specified and as directed.

Servicing of DG set with AMF Panel including replacement of fuel filters, oil filters, air filter element, changing oil, cleaning fuel lines, checking leakage and repairing it, replacement of exhaust manifold gasket , checking of battery terminals, checking of gravity of batteries & filling of distilled water to batteries, checking / cleaning / de-scaling of radiator and filling of new coolant, checking of hose pipe set etc complete all as specified and as directed by Engg in Charge all as per manufacturer/authorized service centre for 15 KVA DG Set

All as per item Sl No 114 above but capacity 10 KVA DG Set complete all as specified and as directed.

All as per item Sl No 114 above but capacity 30 KVA DG Set complete all as specified and as directed.

All as per item Sl No 114 above but capacity 40 KVA DG Set complete all as specified and as directed.

S&F K Cool Super Plus Coolant in 10 Ltrs cane complete all as specified and as directed.

Draining out Engine Oil and replacement with K Oil Super in 1 Ltrs can complete all as specified and as directed.

Supply of Cotton Pack (Cotton waste) complete all as specified and as directed.

S&F Cap for fuel tank complete all as specified and as directed by Engg in Charge.

S&F Belt A x 60 complete all as specified and as directed by Engg in Charge.

S&F Fuel filling hose complete all as specified and as directed by Engg in Charge

S&F Air inlet hose complete all as specified and as directed by Engg in Charge.

S&F Drain pipe complete all as specified and as directed by Engg in Charge.

S&F Air cleaner assembly complete all as specified and as directed by Engg in Charge.

S&F AVR complete all as specified and as directed by Engg in Charge.

S&F Filter header complete all as specified and as directed by Engg in Charge.

S&F Oil filter assembly complete all as specified and as directed by Engg in Charge.

S&F Fuel pipe (pump to fuel filter) complete all as specified and as directed by Engg in Charge.

S&F Fuel pipe (Filter to FIP inlet) complete all as specified and as directed by Engg in Charge.

S&F V Belt complete all as specified and as directed by Engg in Charge.

S&F Exhaust silencer complete all as specified and as directed. by Engg in Charge.

S&F Bracket air cleaner complete all as specified and as directed. by Engg in Charge.

S&F Hose for air cleaner complete all as specified and as directed by Engg in Charge.

S&F Drain pipe for lubricant complete all as specified and as directed by Engg in Charge.

S&F Exhaust pipe complete all as specified and as directed. by Engg in Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including tube light fittings, switches, ceiling roses, pendants, fan regulators, sockets etc removing material from site and keeping in safe custody for taking as schedule of credit/depositing to MES store yard and making good to the disturbed surfaces of walls, floors, roof etc complete all as specified and as directed

Taking down carefully sub main wiring with aluminium/copper conductor cable 4/6/10/16 sqmm in PVC conduit complete removing materials from site and making good the disturbed surfaces of wall/floor etc. complete all as specified and as directed

M&L for sub main wiring with two runs of PVC insulated multistranded copper conductor cable of 4 sqmm with one run of 4 sqmm as earth continuity including 25 mm PVC casing capping complete All as specified and directed. Note:- 2 runs of 4sqmm cable, one run of 4 sqmm earthing cable and one run of 25mm PVC Casing shall be measured as one run

M&L for colour code point wiring with FRLS PVC insulated and unsheathed cable with 1.5 Sqmm copper conductor single core multistrand 1100 Volt grade conforming to IS 694 drawn through PVC casing capping of suitable size, with suitable size flush box covered with 3 mm thick plastic laminated sheet cover for fixing sockets/switches etc surface mounted on wall and 1.5 sqmm copper conductor as earth continuity to connecting common earth dolly complete all as specified and directed for the following:-

(a) One light point controlled by one No. one way switch 5/6 Amps complete all as specified and as directed

(b) One ceiling fan/exhaust fan point controlled by one No. one way switch 5/6 Amps complete all as specified and as directed

(c ) one 3 pin 5 Amps socket outlet on the independent boards controlled by one 5 Amps switch complete all as specified and as directed

(d ) One 3 pin 5 amps socket outlet on the same board with other switches controlled by one 5 Amps switch, complete all as specified and as directed

All as per item No 141 herein before but 4 Sqmm PVC insulated and PVC unsheathed copper multi stranded conductor cable and 4 Sqmm multi stranded copper conductor for earth wire for 3 pin 15 Amps power points complete all as specified and as directed

S&F switch piano flush button single pole one way. 5 amps 240 volts as per existing type and model complete all as specified and as directed

S&F socket outlet 2 in 1, 3 pin 5 Amps, 240 volts as per existing type and model complete all as specified and as directed

S&F switch piano flush button single pole one way 15/16 Amps, 240 Volts existing type and model complete all as specified and as directed

S&F socket outlet 2 in 1, 3 pin, 5 Amps and 15 Amps flush type, 240 volts existing type and model complete all as specified and as directed

S&F ceiling rose surface Bakelite three terminals 65x25mm PVC/Polycarbonate isolated body complete all as specified and as directed

S&F lamp holder PVC/Polycarbonate type with back plate suitable for angular fitting complete all as specified and as directed

S&F stepped switch type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and as directed

S&F and replacement of switch & socket outlet 2 in 1,3 pin, 5 and 15 amps existing type and model complete all as specified and as directed

S&F and replacement of switch & socket outlet 3 pin, 5 flush type existing type and model complete all as specified and as directed

S&F and replacement of bell push , flush type 5 Amps existing type and model complete all as specified and as directed

S&F and replacement of switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch complete all as specified and as directed

S&F and replacement of socket outlet 3 pin, 5 flush type modular press type complete all as specified and as directed

S&F and replacement of bell push , flush type 5 Amps modular press type complete all as specified and as directed

S&F and replacement of switch flush type 5 Amps modular press type complete all as specified and as directed

S&F and replacement of switch flush type 15 Amps modular press type complete all as specified and as directed

S&F and replacement of stepped type electronic fan regulator, modular, press type complete all as specified and as directed

S&F and replacement of bell AC multi music type 230 volt complete all as specified and as directed

S&F LED Tube light fitting slim energy saving 1X18 Watt, connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector, fitting fixed on wall /ceiling and all as specified and as directed by the Engr- in - Charge. Make: Havells, Cat No.LUMILINEPLUSBS18WLED865SPCSS or techno-commercially equivalent.

S&F LED Tube light cool rod slim energy saving 1X20W LED 6500 K single side connection, all as specified and as directed by the Engr- in - Charge. Make: Havells, Cat No. PHOTONULTRAE 2.01213T8SSTL20WLED865SPC or techno-commercially equivalent.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specified and directed at site.

S&F in replacement MCB DB, TPN 4 way suitable for three phase 440 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCB's single/double pole including dismantling of old existing complete all as specified and directed.

S&F in replacement MCB DB, SPN 4 way suitable for single phase 240 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCB's single/double pole including dismantling of old existing complete all as specified and directed.

All as per item No.164 above but SPN 8 way complete all as specified and as directed

All as per item No.164 above but SPN 12 way complete all as specified and as directed

S&F MCB single pole with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding suitable for single phase circuit of 6 to 32 'C' Series complete all as specified and as directed

All as per item No 167 above but MCB DP 40 Amps complete all as specified and as directed

All as per item No 167 above but MCB TPN 63 Amps complete all as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode size 600X600X6mm thick buried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC 1:3:6 type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 mtr long, etc complete all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately

S&F in replacement of existing Tube light LED fitting 20 watt complete all as specified and as directed. Make : CG, Cat no.CCS-100-20-65-HL2-DP-NWH/Havells, Cat No. LUMILINEPLUSBS20WLED865SPCSS/Wipro or techno-commercially equivalent.

S&F in replacement of Bed side lamp decorative ultra slim round profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient 5 watts LED 6500 K complete all as specified and as directed.

Taking down carefully unserviceable ceiling fan of any size from its position dismantling blades, opening the fan motor, removing of defective parts such as ball bearing, bush, burnt winding, shaft, split pin, condenser, condenser holder, shackle, re-assembling after replacement of 3 core 0.75 Sqmm (24/0.2mm) flexible copper cable from ceiling rose to connector, hanging in its position properly complete all as specified and directed

All as per item No 173 above but for exhaust fan of any size complete all as specified and as directed.

All as per item No 173 above but for wall mounted fan of any size complete all as specified and as directed.

All as per Item No 173 above but for pedestal fan of any size complete all as specified and as directed.

Supply only replacement ceiling fan condenser 2.5 MFD, 240 volt, AC complete all as specified and as directed.

Supply and replacement exhaust fan condenser 4.0 MFD, 240 Volt, AC complete all as specified and as directed. make EFCOS or techno-commercially equivalent.

Supply and replacement condenser holder or metal for fixing capacitor/condenser complete all as specified and as directed

Supply and fix in repair rubber shackle with nuts bolts, washers, split pin and canopy complete for hanging of ceiling fan of any size complete all as specified and as directed

Cleaning and preparing the surface of ceiling fan, wall mounted fan exhaust fan, pedestal fan, removing the grease, carbon dust over, the fans and painting with one coat of synthetic enameled paint of approved colour with brush painting and writing MES number of the fan all as directed by EIC complete all as specified and as directed

M&L for re-winding the stator complete with super enameled copper conductor with the same size the number of turns as that the old one insulating, varnishing and pre heating for the following:-

(a) Ceiling fan 1200mm/1400mm sweep any model complete all as specified and as directed

(b) Exhaust fan up to 300mm sweep complete all as specified and as directed

(c) Exhaust fan above 300mm up to 450mm sweep complete all as specified and as directed

(d) wall mounted fan up to 300mm sweep complete all as specified and as directed

(f) Pedestal fan up to 400mm sweep complete all as specified and as directed

Removing the damaged and corroded exhaust fan louvers and replaced with new louvers of following size:-

(a) Exhaust fan above 300mm sweep complete all as specified and as directed

(b) Exhaust fan above 300mm up to 450mm sweep complete all as specified and as directed

Removing the damaged and corroded exhaust fan blades and replaced with new blades of size : -

(a) Exhaust fan up to 300mm sweep complete all as specified and as directed

(b) Exhaust fan above 300mm up to 450mm sweep complete all as specified and as directed

Taking down of geyser any type and capacity for servicing and overhauling of water supply connection, de-scaling, reshaping of inner cell complete refixing the same after repair /servicing complete all as specified and as directed

S&F replacement of heating element cup type 1 KW complete all as specified and as directed.

S&F replacement of heating element triangular type 1 KW complete all as specified and as directed.

S&F replacement heating element 2 KW of solar water heater complete all as specified and as directed.

S&F replacement of thermostat for geyser complete all as specified and as directed.

S&F LED Lumen lamp 10 watt Ball Lamp for normal holder type cool day light 230/240 AC supply complete all as specified and directed.

S&F LED Lumen lamp 9 watt Ball Lamp for normal holder type cool day light 230/240 AC supply complete all as specified and directed

S&F candle LED lamp 3 watt E 14 candle Lamp for type cool day light 230/240 AC supply complete all as specified and directed.

S&F energy saving LED Flood light 50 Watts with high power LEDs as light source suitable for high lightning of area including fixing arrangement complete all as specified and directed. Make: Havells Cat No. JETA QUANTOPLUSFLP50WLED757SYMLENS or techno-commercially equivalent.

S&F new security light fitting complete with 40 watt LED type pressure die cast aluminium housing and TOP opening separate driver compartment with IP 66, IK 07 protection and better optics for uniform distribution etc complete fixed bracket made out by GI pipe (light grade) of suitable size and MS clamp and nut bolts washers etc complete and connected with twin core cable 1.5 sqmm from to fittings connector all as specified and directed Make: Havells Cat part no: ENDURAPEARL NEOSL40WLED757PASYTOPC or techno-commercially equivalent.

S&F in repair candle (filter) 10” size including taking down old unserviceable complete all as specified and as directed.

S&F in repair PCB card 12 volt DC capacity for Aqua guard including dismantling old unserviceable complete all as specified and directed

S&F in repair carbon (filter) 12” size including taking down old unserviceable complete all as specified and as directed.

S&F in replacement of ceiling fans blades ( set of three) 56"/48" size make as per existing or as required complete all as specified and directed

S&F KWH Electric meter digital display single phase Class: 1.0, 50 Hz, 5 to 30 Amp (CT operated), Temp 27 degree Celsius Marked all as specified and directed.

S&F KWH Electric meter digital display 3 Phase four wire Class: 1.0, 50 Hz 10-40 Amp (CT operated), Volt : 3 x 240 V Marked all as specified and directed.

S&F Energy saving, environment friendly & robust high bay LED fitting of 80W with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy up to 150 lm/W, including fixing arrangement complete all as specified and directed. Make. Havells Cat No:SAUCERGENXPROHBP80WLED757P90DBOLTG/ or techno-commercially equivalent.

S&F security light fitting complete with 30 watt LED type pressure die casting aluminium housing with acrylic cover as diffuser with IP 66 protection, impact resistance of IK07 and heat resistant toughened glass with frame protection and better optics for uniform distribution etc complete fixed bracket made out by GI pipe (light grade) of suitable size and MS clamp and nut bolts washers etc complete and connected with twin core cable 1.5sqmm from ceiling rose to fittings connector all as specified and directed. Make Havells(Item Code: ENDURAPEARL SL30WLED757SASYTOPCMP) or techno-commercially equivalent.

Taking down old unserviceable existing street light fitting such as fluorescent light/HPSV/HPMV from pole/ bldgs. of any height and refixing and connecting the same after necessary repair work inch provn of 3 core 1.5 Sq. mm copper cable for making connection from fitting to OH line, all as specified and directed By engr In charge

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation of poles or laying of cable trench not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard /dense soil complete all as specified and directed.

M&L for sand cushioning to PVC cable using riddled sand obtained from excavation or river sand gently punned below / around cable complete all as specified and directed. Note: Punned thickness only will be measured and paid.

M&L for well burnt bricks sub class ‘B’ as in protection of cable laid dry, flat abutting each other width wise complete all as specified and directed by Engg-in-Charge.

Supply & Laying XLPE insulated, screened, PVC Bedded, galvanized steel strip of wire armoured, electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area 6 Sqmm 2 core laid in trenches / ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets and taking down old unserviceable UG Cable etc complete all as specified and directed

S&F in repair energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient 30 Watts LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection including connection with suitable size of cable complete all as specified and directed. Make:- Havells (cat part no. ENDURAPEARL SL30WLED757SASYTOPCMP) or techno-commercially equivalent.

Supply and fix in repair energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power 45 Watts LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection including connection with suitable size of cable complete all as specified and directed. Make:- Havells (cat part no. ENDURAPEARL NEOSL45WLED757PASYTOPC) or techno-commercially equivalent.

Supply and fix in repair post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaries with high power 25 watts LEDs as light source including connection with suitable size of cable complete all as specified and directed. Make:- Havells (cat part no.RUBYPT25WLED757PSYMTOPC) or techno-commercially equivalent.

Supply and fix in repair bollard light ,energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaries for diffused lighting with high power 8/10 Watts LED as light source. Including connection with suitable size of cable complete all as specified and directed Make:- Havells (cat part no. CONENXGBLS8WLED830PSYMTOPCM) or techno-commercially equivalent.

M&L for servicing the existing solar street light by checking the wire connection and replace the worn out/unserviceable tubular C10 type rechargeable battery of Capacity 12 V, 80 AH of make Exide 6LMS150L or techno-commercially equivalent at entire satisfaction of Engr in charge.

M&L for Junction box sheet moulding compound type with hinged type door locking arrangement, white colour of size 200x100x105 (out door type) with MCB SP 6Amps fixing in the box complete all as specified and directed.

Taking down old unserviceable PCC pole including dismantling / demolition PCC foundation etc from existing line & removing the debris from site complete all as specified and as directed.

Dismantling taking down removing old / unserviceable ACSR conductor from existing LT O/H line with its jumper & binding wire complete all as specified and as directed. by Engineer-in-Charge.

Taking down old unserviceable cross arms bracing supports clamps back plate fabricated from structural steel section including nuts bolts washers complete all as specified and as directed. by Engr-in-Charge.

S&F ACSR conductor for LT OH line including binding on insulator with binding wire of squirrel / weasel or any other as per site requirements and complete all as specified and as directed and as directed. by Engineer-in-Charge. Note: 3 % of actual pole to pole distance will be added for sag and binding wire for measurement and Payment purpose.

M&L for cross arm bracing supports clamps back plate fabricated from structural steel section including nuts bolts washers welding bending cold and hot drilling holes in any shape or size as indicated or directed inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation for poles & stay etc., complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 20mm graded stone aggregate for fdn for poles & stay etc., complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded for pedestal including necessary formwork finished fair using extra cement complete all as specified and as directed.

M&L for GI tubing light grade, ISI marked conforming to IS 1239 for protection of cable fixed in wall or laid on trenches suitable for the following size of pipes 40 mm dia complete all as specified and as directed.

M&L for GI tubing light grade, ISI marked conforming to IS 1239 for protection of cable fixed in wall or laid on trenches suitable for the following size of pipes 80 mm dia complete all as specified and as directed.

Laying only old serviceable bricks retrieved from existing trenches complete all as specified and as directed.

Supply & Laying XLPE insulated, screened, PVC Bedded, galvanized steel strip of wire armoured, electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area 95 Sqmm 3.5 core laid in trenches / ducts/ fixed to wall /pole/ inside panel/ drawn through pipe including cable glands and terminal sockets and taking down old unserviceable UG Cable etc all as specified and directed.

All as item No 227 hereinbefore but Size of cable 70 Sqmm 3.5 core complete all as specified and as directed.

All as item No 227 hereinbefore but Size of cable 50 Sqmm 3.5 core complete all as specified and as directed.

All as item No 227 hereinbefore but Size of cable 35 Sqmm 3.5 core complete all as specified and as directed.

All as item No 227 hereinbefore but Size of cable 25 Sqmm 3.5 Core complete all as specified and as directed.

All as item No 227 hereinbefore but Size of cable 16 Sqmm 4 Core complete all as specified and as directed.

All as item No 227 hereinbefore but Size of cable 10 Sqmm 2 Core complete all as specified and as directed.

All as item No 201 hereinbefore but Size of cable 4 Sqmm 2 Core complete all as specified and as directed.

Cleaning the vegetation around two/four pole structure & transformer yard, sub stn, LT panel area, generator rooms etc all as directed at site complete all as specified and as directed.

Cutting the tree branches which touches the LT/HT OH lines span not exceeding 50 meters distance and depositing the tree branches/leaves at 30m distance away from the site complete all as specified and as directed. Note : Any number of tree branches out in one span will be measured as one length for payment purpose.

Supply and fix straight through cable jointing kit for 1100 Volts grade cable complete with jointing material heat shrinkable and accessories suitable for 3.5/4 core XLPE/PVC insulated armoured Aluminium conductor cable of size 16 Sqmm to 50 sqmm complete all as specified and as directed

All as item No 237 hereinbefore but Size of cable 70 Sqmm to 95 sqmm complete all as specified and as directed.

Repair and replacement of Power Factor Capacitor Three Phase of capacity including taking down old item complete all as specified and as directed

Repair and replacement of Power Switching Contactor complete all as specified and as directed

Repair and replacement of Power Switching MCB of Triple Pole of cap 20 Amps complete all as specified and as directed.

Repair and replacement of APFC relay 8 stage complete all as specified and as directed

M&L dehydration of transformer oil with mobile stream line transformer oil filtration plant at site with all accessories connected to transformer and carrying out filtration of oil to desired dielectric strength i.e. not less than 40 KV at 2.5 mm gap complete all as specified and as directed. NOTE-Test certificates shall be submitted for before and after filtration for dielectric strength on the proper format

M&L for replacement of transformer oil conforming to IS 335/1983 for topping up/replacement by stream line filter complete all as specified and as directed

Supply and fix MCCB of capacity 400 Amps 415 volts four pole 36 kA breaking capacity complete all as specified and as directed.

Supply and fix MCCB of capacity 200 Amps 415 volts four pole 35 kA breaking capacity of complete all as specified and as directed.

Supply and fix MCCB of capacity 100 Amps 415 volts four pole 25 kA breaking capacity of complete all as specified and as directed

Supply and fix MCCB of capacity 63 Amps 415 volts four pole 16 kA breaking capacity of complete all as specified and as directed.

Supply and fix of shackle type insulator porcelain vitreous white brown or green 90mm dia and 75mm height including GI strip of 31 x 3mm size, 12mm dia insulator bolt washer and nut complete all as specified and directed.

M&L for fixing in true vertical position Steel tubular swaged poles complete with cast iron base pate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 9.0 meters long complete all as specified and as directed.

M&L for Painting of Steel tubular poles complete with cross arms, bracing, clamps and brackets with one coat of good quality of synthetic enamel silver paints complete all as specified and as directed.

M&L for Painting of zebra patta to RCC / Steel tubular poles ,at bottom portion with black and white paints up to height 1.2 meter in alternate strip manner (width of strip not more than 30cm) and writing MES Nos on LT Poles with black paint in capital letters of size 4cm height and 2 cm wide such as “LT-1, LT-999” with black on white back ground circle of not less than 16 cm complete all as specified and as directed.

S&F connect including testing of change over switch capacity 63 amps AC 415 volt 4 pole side / front handle operated in sheet steel enclosure complete all as specified and as directed. Note: minor addition alteration in panel required for fixing of change over switch are deemed to be included in the above quoted rates

M&L for Cutting of existing bituminous surface road including returning filling in and making good with material and labour for PCC (1:3:6) type C1 using 20mm graded stone aggregate to match with the existing surfaces complete all as specified and as directed.

M&L for welding, grinding, repair of locking arrangement and hinges of various size of LT, HT Panels, APFC Panels, Switch board and directed by Engineer-in-Charge.

M&L for repair and overhauling of 50 KVA Stabilizer through authorised dealer and complete all as specified and as directed. by Engineer-in-Charge.

M&L for preparation /cleaning of old painted steel surfaces of LT Panels, HT, Switch boards and carrying painting with one coat of synthetic enameled paint first quality paint and writing SM/MES No 5 cm height with white synthetic and directed by Engineer-in-Charge. enamel paint all as specified writing of block stencil cut MES No.2 cm height as directed.

M&L for preparation /cleaning of old painted steel surfaces of Transformer of any capacity and carrying out painting with One coat of synthetic enamel first quality paint and writing SM/MES No 5 cm height with white synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

S&F RYB phase indicators lamp 240 Volt AC assembly with LED lamp complete all as specified and as directed. by Engineer-in-Charge.

eurekaenterprises

rvelectricals

K C ASSOCIATES

UNIQUE INDIA CONSTRUCTIONS