Providing street light balance work on 30mtr wide road TS-04 to TS-1B service road of Yamuna Expressway from ch.N0-18.700 to ronija village sector -22D, YEA EM-02

Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1.5 Mtr length each ) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.as per the directions of the Engineer-in-charge. make Bajaj, Philips, Paruthi, Surya, BP Projects) PWD-2018/PS No-645

Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1.5 Mtr length each ) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.as per the directions of the Engineer-in-charge. make Bajaj, Philips, Paruthi, Surya, BP Projects) PWD-2018/PS No-646

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 Protection complete in all respect as per the directions of the Engineer-in-charge. (Make Philips, Crompton, Bajaj,Havells) PS-1423 Cat-AAA

Supply & Fixing of XLPE insulated, Copper un-armoured Control cable 1100V grade etc. Complete in all respects as per direction of the Engineer-in-charge. make- CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI. 3Cx2.50Sqmm YEIDA SOR-1

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI , Gloster , Asian , Universal , Nicco , ICL , Diamond, Havells & KEI make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga , Suraj, Delton, Grandly, Polycab & KEI make can be used) complete in all respect as per the directions of the Engineer-in-charge 4C x 16 Sqmm PWD-2018/PS No-501

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI , Gloster , Asian , Universal , Nicco , ICL , Diamond, Havells & KEI make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga , Suraj, Delton, Grandly, Polycab & KEI make can be used) complete in all respect as per the directions of the Engineer-in-charge PWD-2018/PS No-501 (a) 3.5C x 70 Sqmm

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect as per the directions of the Engineer-in-charge. 40 A TPN PWD-2018/PS No-807

S/F of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 Mtr. below ground level complete with 20 mm dia G.I. pipe & funnel for watering & one earthing lead of one no. 8 to SWG GI wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of GI pipe and GI wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 150 mm thick all-around etc. complete in all respect as per the directions of the Engineer-in-charge. PWD-2018/PS No-702

Supply and laying of 25mmx3mm G.I. strip from earth electrode directly in the ground as required complete in all respect as per the directions of the Engineer-in-charge PWD-2018/PS No-710

Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect.as per the directions of the Engineer-in-charge. PWD-2018/PS No-628