RENOVATION OF QUANTUM OPTICS LAB 2 CAFETERIA AT POINTS BUILDING AND PROVN OF HARDSTANDING AT DIAT CAFETERIA AT DIAT DU GIRINAGAR PUNE 411025

Amount

Demolition of plain cement concrete manually/by machanical means in ground floors or pavings and in any position and of any thickness(below or above ground level) incl disposal of material within 50 mtrs lead from site,etc.complete all as specified and directed.

Demolition of cement concrete(Reinforced)manually/by machanical means in roofs,floors,beams,staircase,chajja and similar suspended work any thickness(below or above ground level) incl disposal of material within 50 mtrs lead from site,etc.complete all as specified and directed.

M&L rendering 20 mm thick on external surface of brick/concrete, in CM 1:4 mixed with and including water proofing compound @3% by weight of cement as per manufacturer instruction as in wall and chajjas etc complete all as specified and directed.

Earthwork in excavation in foundation trenches by mechanical means(exceeding 30 cm in depth,as well as 10 Sqm on plan) incl dressing sides and ramming of bottoms,lift upto 1.50 mtr,incl getting out excavated soil and disposal of surplus excavated soil within 50 m lead as in all kinds of soil complete all as specified and directed.

Taking down cement plaster ,any description on brick or concrete or stone walls incl racking out joints,hacking for key scrubbing down with water,etc and removal of rubbish off 50 mtrs lead from site,complete all as specified & directed.

M&L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in wall foundation complete all as specified and directed.

M&L for brick work with fly ash F.P.S.(non modular) brick of class designation 7.5 in super structure above plinth level in cm 1:6,etc.complete all as specified and directed.

Demolation of brick work in cement morter manually/by mechanical means incl stacking of severviceable and disposal of unserviceable material within 50 mtrs lead,etc.complete all as specified and directed.

Taking down door,windows and clerestory shutter(wooden/steel) with chokhats with holdfast and fittings,etc.complete and stacking within 50 mtrs lead of area not exc.3.00 sqm and below complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in cm 1:6 finished even and smooth without using extra cement on wall and sides windows/doors,etc.complete all as specified.

M&L for 50 mm thick cement concrete 1:3:6, type C-l with using 20 mm graded stone aggregate from natural source over rammed earth,extra add of synthetic polyester triangular fibre of length 12 mm effective dia 10-40 microns &specific gravity of 1.34 to 1.40 in cement concrete flooring by using 125 gms of synthetic Polyester triangular fibre for 50 kg cement used,etc.complete all as directed.

M&L for 20 mm thick plaster in CM 1:6 on concrete surface mixed with and including water proofing compound @ 3% by weight of cement finished surface even and smooth with using cement slurry,etc.complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:2:4, type B-l with using 20 mm graded stone aggregate from natural source over rammed earth,extra add for with and including water proffing compound in cement concrete work @ 3% by weight of cement as per manufacturer instruction,etc. complete all as specified and directed.

Dismantling of stone slab/floor tiles laid in cement mortar incl stacking of serviceable material and disposal of unserviceable material within 50 mtrs lead,etc.complete all as specified and directed.

M&L for Glazed vitrified antiskid tile of size 600mmx600 mm,coloured as in flooring,with water obserption less than .08% and confirming to IS-15622 of approved make coloursand shade,laid over and including 20 mm thick screed bed in cm 1:4, joinng with grey cement slurry @ 3.30 Kg/Sqm incl grouting the joints with white cement and matching pigments,as in flooring and skirting ,etc.complete all as specified and directed.

M&L for Double charged vitrified tile polished finish of size 600x1200 mm,coloured as in flooring,with water obserption less than .08% and confirming to IS-15622 of approved make coloursand shade,laid over and including 20 mm thick screed bed in cm 1:4, joinng with grey cement slurry @3.30 Kg/Sqm incl grouting the joints with white cement and matching pigments,as in flooring and wall dado ,etc.complete all as specified and directed.

M&L for 18 mm thick black granite work as in flooring ,steps, jambs, window cill and cooking plateform,etc.over 20 mm thick screed bed in cm 1:4 incl pointing in white cement 1:2 using white cement and marble dust with admixture of pigment to match with shade of granite,incl rubbing,curing,moulding of edges,etc.complete all as specified and directed.

S&F 2nd class Salwood for plain,solid,straight chowkhats and frames,wrought,framed rebated on the solid,rounded or chamfered,put together with glue pinnedat joints,etc.complete all as specified and directed.

S&F 40 mm thick flush door shutters confirming to IS-2202,decorative type,core of construction with frame of l st class HW and well matched teak 3 ply veneering with verticle or cross grains /bands and face veneers on both face of shutters incl stainless steel butt hinges with necessary screws,etc.complete all as specified and directed. .

S&F UPVC factory made white colour in three track sliding window with two nos.glass shutters and one fly proof with stainless steel wire mesh,frame size 92x44 mm and sash having 32x60 mm both having wall thickness 1.90 mm and single glazing bead of appropriate size(area of window upto 1.75 Sqm incl necessary handle,lock,snap beading,etc.complete. luminium section weighing 0.55 Kg/Rm incl necessary joining cleats,glazing clips,handles,locking system,snap beading,etc.complete all as specified.

S&F 1 mm thick MS sheet door with frame of angle 40x40x6 mm and 3 mm MS gusset plate at the junction &corners incl all necessary fittings,etc. incl applying a primering coat of steel primer complete all as specified and directed.

M&L for framed work such as grills,gratings,framed guard bars,etc.with ends of bars shouldered and riveted or forged into spikes,confirming to grade E-250 incl necessary drilling,notching and welding or connecting with angle cleats or nut bolts,etc.complete all as specified & directed.

S&F UPVC frame ,sash and mullion extruded profiles with 5% tolerance in dimension shall be accepted,as in fixed window/ventilators made of (small series)frame 47x50 mm &mullion 47x50 mm both having wall thickness 1.90 mm and single glazing bead of appropriate dimension(area upto 0.75 Sqm),etc.complete all as specified and directed.

S&F 200x10 mm bright finished brass tower bolts(barrel type) with necessary screws,etc. complete all as specified and directed.

S&F Aluminium die cast body tubular type,universal hydraulic door closer(having brand logo withISI,IS:3564,embossedon the body,door weight 35 kg and door width upto 700 mm),with necessary accessories and screws,etc.complete all as specified and directed.

M&L for Kota stone slab flooring over 20 mm (average) thick base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab,incl rubbing and polishing complete with and over 20 mm thick screed base of cement mortar 1 ;4 etc complete all as specified and directed.

S&F GI Metal ceiling in plain Beveled edge global white colour of size 600x600x0.50 mm thick with 25 mm heiht,made of GI sheet having galvanising of 100 gms/sqm (both sides inclusive)and 20%perforation area with 1.8 mm dia holes and having NRC of 0.5,electro statically polyster powder coated of thickness 60 microns(minimum),incl factory printed after bending and perforration,etc.complete all as specified and directed.(Make:Armstrong or Saint Gobin)

S&F 75x60x3.10 mm ,butt hinges,cast brass,with mild steel hinge pin,bright polished,etc complete all as specified and directed.

S&F 125 mm long,aluminium handles,fabricated type polished,etc complete all as specified and directed.

S&F 150x10mm aluminium tower bolts,ISI marked,anodised coating ,etc. complete all as specified and directed.

S&F Twin rubber stopper anodised aluminium,hanging floor door stopper,ISI marked,etc, complete all as specified and directed.

S&F factory made solid panel PVC flush door shutter 25 mm thick made out of a one piece Multi chamber extruded PVC section of size 762 mmx25 mm or as requirment with an average wall thickness of 1 mm. PVC foam end cap of size 23x10 mm are provided on both verticle edges to ensure the overall thickness 25 mm. MS tube having dimensions 19x19 mmX1 mm is inserted along the hinge side of door.Core of door shutter should be filled with high density polyurethane foam.The bottom &top edges of the shutter are covered with end cap of size 25x11 mm.Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer specification,etc.complete all as specified and directed.

S&F Sintex water storage tanks,IS-12701,ISI marked with cover and locking arrangements and making necessary holes for inlet,outlet and overflow pipes of 2000 ltrs capacity(cylindrical verticle with closed top complete all as specified and directed.

M&L for preparation of new wooden surface and apply two coats of french polishing incl wood filler liquid transparent,finishing coat with synthetic varnish over a coat of sizing ,etc. Complete all as specified.

M&L for structural steel work with square,rectangular hollow tubes,angle,channel,flat iron ,etc. as in purlins,rafter and cleats;incl cutting ,hoisting,fixing in position with hot finished welded type sections incl welding,bolting with special type washers,etc.and applying a priming coat of red oxide,etc.complete all as specified and directed.

S&F precoated galvanised iron profile sheets,(size,shape and pitch of corrugation as approved by EIC)0.50 mm(+0.05%)total thickness with zinc coating 120 gm/Sqm as per IS277,in 240 Mpa steel grade,5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns.the sheet shall be fixed using self drilling/self tapping screws of size(5.5x55 mm) with EPDM seal,etc.complete all as specified and directed.

M&L for preparation of new steel work surfaces with Two coats Deluxe Multi Surface paint of required [email protected] ltr/10 Sqm over a coat of primer applied @0.80 ltr/x sqm of approved brand,etc.complete all as specified and directed.

M&L for preparation of external new wall surface and applying two coats of Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS-15489:2004,Alkali&Fungal resistance,dirt exterior paint of required shade over and incl a coat of primer applied @0.90 Ltr/X sqm,etc.complete all as specified and directed.

M&L for preparation of new wall surface internally and applying two coats of Premium acrylic emulsion smooth exterior paint of required [email protected] ltrs/ Xsqm over a coat of alkali resistance [email protected] kg/Xsqm on wall srfaces,etc.complete all as specified and directed.

M&L for formwork to sides and soffits of lintel beam,floor beam,floor slab,chajja and similar work n.exc. 200 mm thickness,etc.complete all as specified and directed.

M&L for RCC 1:1.5:3,with using 20 mm graded stone aggregate as in lintel beam,cantilever,chajja,plateform,etc.complete all as specified and directed.

S&F TMT bars 8 mm dia and over of grade Fe-500D steel reinforcement cut to length,bent to shape required incl cranking,bending,spirally for hooping for columns hooking ends and binding with MS wire (annealed)n.less than 0.9 mm dia or securing with clips,etc.complete all as specified and directed.

S&F CPVC,15 mm nominal dia pipes,having thermal stability for hot & cold water supply,incl all CPVC plain &brass threaded fittings,incl fixing pipe with clamps at spacing,incl one step CPVC solvent cement and testing of joints as per direction of EIC,etc.complete all as specified and directed.

All as per item 43.00 but 20 mm dia CPVC pipes complete all as specified and directed.

S&F in unplasticised PVC connection 45cm long, 15mm bore with 2 Nos unions complete all as specified and directed.

S&F vitreous china pedestal type water closed pan(EWC) white including seat cover white,5 ltrs capacity automatic flushing cistern with fittings,flush pipe with standard spreader pipes and fittings fixed inside in wall incl necessary cutting and making good etc.complete all as specified and directed.(Make ;Cera or Jaguar)

S&F vitreous china wash hand basin white 550x400mm oval shape incl CP fancy pillar tap,PVC waste pipe 32mm dia, CP brass waste coupling 32mm,bottle trap of approved quality and make etc complete all as specified and directed. (Make:Cera or Jaguar)

S&F CP brass long body bib tap 15mm bore fancy type with crutuh or butterfly handle, screwed down for pipe etc completed of approved make and weight not less than 690gm complete all as specified and directed.

S&F toilet paper holder of chromium plated with brass screws etc. complete all as specified and directed.

S&F 20mm bore float ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for pipe 20mm dia, weight not less than 440gm complete all as specified and directed.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe of 20mm bore etc complete all as specified and directed.

S&F PTMT towel rail of 600mm long fixed with wooden plug with CP brass screws etc complete all as specified and directed.

S&F 300 mm long brass sliding door bolt with sand or die-cast brass hasp and staple(Bolt type),fixing bolts with rolled or drawn brass bolts,etc. complete all as specified and directed.

S&F PVC (SWR) floor trap, dia of outlet 75mm, plain with grating incl jointing with solvent cement etc complete all as specified and directed.

S&F Stainless steel kitchen sink with draining board,made out of 1.00 mm thick sheet for kitchen with plug,washers waste pipe,connecting union and fittings of size 915x460 mm with bowl size 410x330x160 mm on cooking plateform,etc.complete.

M&L for Polyurethane (PU) water proofing compound of Dr.Fixit apply on concrete surface and verticle plaster wall surfaces,etc.complete.all as specified and directed.

S&F chromium plated soap dish fixed with screws etc complete all as specified and directed.

S&F two way bib taps CP 15mm bore, fancy type with crutch or butterfly, screwed down for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F Chromium plated health faucet with flexible pipe, fancy type etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall, floor etc complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall, floor etc complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore etc complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore etc complete all as specified and directed.

S&F PVC (SWR) branch piece single (shape Y) equal or unequal 110mm bore pipe etc complete all as specified and directed.

S&F PVC (SWR) branch piece single (shape Y) equal or unequal 75mm bore pipe etc complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore etc complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore etc complete all as specified and directed.

Taking down existing wash and basin with fitting and fixtures etc complete all as specified and directed.

S&F 15mm bore, senserfor CP pillar tape for wash basin etc complete all as specified and directed.

(INTERNAL ELECTRIFICATION) Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, complete all as specified and as directed.

Taking down carefully unserviceable DBs any type/size and disconnecting and making good disturbed surfaces complete all as specified and directed.

M & L Point wiring for light point with 1.5 sqmm FRLS PVC insulated copper coductor single core cable in concealed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc all as specified and directed for the following;- (a) One light point controlled by one switch.

(c) One fan / Exhaust fan point controlled by one switch and one regulator complete all as specified and directed.

M & L point wiring with 2x1.5 sqmm FRLS PVC insulated copper conductor single core cable + 1x1.5 sqmm FRLS PVC insulated copper conductor single core cable for earthing for one 3 pin switch socket outlet point 5 Amps complete all as specified and directed.

M & L point wiring with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable + 1 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable for earthing for one 3/6 pin switch socket outlet point 15 Amps complete all as specified and directed.

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etcs as required complete all as specified and directed.

Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 5/6 & 15/16 A modular switch, connections etcs as required complete all as specified and directed.

Supply and fixing of 2 module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required complete all as specified and directed.

S & F ceiling rose, single phase, PVC polycarbonate, insulated body complete all as specified and directed.

Removing the existing fan and servicing, cleaning and spray painting and refixing the same with necessary 3 core wire and accessories complete all as specified and directed.

Supply and fixing in replacement of existing unserviceable T/L fitting 36/40 W on existing pole/wall with Regal Batten General purpose industrial compact batten suitable for single or twin LED Tubelight with integral LED driver, available in single / double side connection CRCA batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge. Make - Havells. REGALBATTEN or equivalent in Crompton/Wipro/Philips as approved.

S & Fix Photon Ultra Plus 2.0 Tubelight <10% Ultra bright LED Tubelight (single side connection) with very high efficacy >=115 lm/W & THD<10% suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make-Havells:PHOTONULTRA or equivalent in Crompton/Wipro/Philips as approved.

S&F LED Tube light fitting 10 watt, 230 volts, sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces complete with all accessories all as specified & directed by Engr-in-Charge. Make-Havells-ENDURALINEARNEO or eqvt in Crompton/Wipro/Philips as approved.

S & Fix of recess mounted 2' x 2' square LED panel 36 watts, Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete all as specified and directed. Make : Havells : PLANO2X2 or equivalent to Wipro/Philips/ Crompton as approved.

M&L for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and directed. (a) 4 x 6.0 sq. mm + 2 x 6.0 sq. mm earth wire complete all as specified and directed.

M&L for supply and Installation of exhaust fan (Metal) 300 mm dia with guards including opening, making good the damage, connection, testing, commissioning etc. as required including removing old fan and handed over to MES store all as directed. Make : Havells or equivalent in specified makes as approved.

Supply and Installation of exhaust fan (PVC) 250 dia with guards including opening, making good the damage, connection, testing, commissioning etc. as required including removing old fan and handed over to MES store complete all as specified and directed. Make - Havells or equivalent in specified makes as approved.

S & Fix sheet metal enclosure MCCB DB VTPN double door 4 way, suitable for 415 V with 200 amps rated bus bar including flushed on walls and making good disturbed surfaces all as specified and as directed. Make : Legrand or equivalent in specified makes as approved.

S & Fix sheet metal enclosure MCCB DB ETPN double door 6 way, suitable for 415 V with 200 amps rated bus bar including flushed on walls and making good disturbed surfaces all as specified and as directed. Make : Legrand or equivalent in specified makes as approved.

S & Fix sheet metal enclosure MCCB DB ETPN double door 12 way, suitable for 415 V with 200 amps rated bus bar including flushed on walls and making good disturbed surfaces all as specified and as directed. Make : Legrand or equivalent in specified makes as approved.

S&F single pole and neutral 12 way double door, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required all as specified and directed. Make : Legrand or equivalent in specified makes as approved.

S&F MCB TPN 40 to 63 A, 415V 'C' curve with 10kA breaking capacity all as specified and directed. Make:Legrand / Schneider / Havells or equivalent in specified makes as approved.

S & Fix MCB, single pole, 240 volts, 6 to 32 Amps, all as specified and as directed. Make:Legrand / Schneider / Havells or equivalent in specified makes as approved.

M&L for earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete all as specified and directed.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required complete all as specified and directed.

(EXTERNAL ELECTRIFICATION) Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core including excavation, returning, removing and refilling etc complete all as specified and directed.

M&L for earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) complete all as specified and directed.

Supply Fabricate, install, connect, test and commission Outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3 mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA poweder coated and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and connection wirings with FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings:-Note: (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (as if required) (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All swith gears should be fixed with 06 mm thick Fibre sheet Make: Any CPRI approved (a) LED/Neon indicator bulb in RYB Colour - 1 Set. (b) 4 No aluminium Bus bar 200 amps with chamber (c) Digital Multi function meter for showing Amps (upto 500 Amps) and Voltage (upto 500 voltage) with suitable CT and PT (d) MCCB 4 Pole, 415 V, Adjustable thermal & adjustable magnetic type, 160A with breaking capacity 36 KA - 01 Nos (e) MCCB 4 Pole, 415 V,adjustable type, 100 A with breaking capacity 16 KA - 02 Nos (f) MCB 4 Pole, 415 V,adjustable type,40A - 02 Nos (g) Suitable cable gland for incoming and outgoing cable

PROVN OF HARDSTANDING AT DIAT CAFETERIA GIRINAGAR, PUNE - 25 Earthwork in all kinds of soil,surface excavation n.exc.30 cm in depth but exc. 1.50 mtr in width as well as 10 sqm on plan incl getting out disposal of excavated earth upto 50 m and lift upto 1.50 m, complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6,type C-2 with using 40 mm graded stone aggregate as bed concrete to interlocking paver block,etc.complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block of any shape and size with glossy finish and with grey cement with pigment of M-30 Gde and laid over with and including 50 mm thick compacted bed of coarse sand, filling joints with fine sand,etc.complete all as specified and directed.

M&L for 15 mm bore GI medium grade tubing as in water supply incl necessary fittings etc.complete all as specified and directed.

S&F 500 ltrs capacity Rotational moulded polythylene water storage tanks(Sintex) cylindrical verticle with closed top hoisted and fixed in position,etc.complete all as specified and directed.

S&F 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe etc. complete all as specified and directed.

Removal of excavated soil to a distance exc.50 mtr but n.exc.500 mtrs depositing where complete all as specified and directed.

Mehta and Co.

J.G.Goel

PAWAN B SHINDE