Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹24.3 L+₹2.8 L (13.2%)Rejected-Finance MEGHA SADAN GAGANNAGAR CURTI PONDA GOA 403401 | PONDA | SOUTH GOA | GOA | 403401 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹26.0 L+₹4.5 L (21.0%)Rejected-Finance | L3 | Rejected-Finance Not being L1 |
Tender Value
₹22.6 L
EMD Value
₹45,120
Closing Date
27 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAJI
GARRISON ENGINEER, OPPOSITE KALA ACADEMY, ST INEZ ROAD, PANAJI GOA-403001
CONSTRUCTION OF NEW ROAD FROM FOL PT TO OR LIVING AT 429 COY ASC SUP TYPE A MARGAO UNDER GE PANAJI GOA
2023_MES_575324_3
8991/E8
Open Tender
Civil Works - Roads
Item Rate
150 days
GE PANAJI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER PANAJI
₹45,120
Yes
14 Aug 2023
6 Apr 2023
29 Apr 2023
6 Apr 2023
27 Apr 2023
13 Apr 2023
6 Apr 2023 - 10 Apr 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.
Rolling and consolidating formation surfaces with power roller exceeding 8 tonne but not exceeding 12 tonne in required gradient & camber complete all as specified and as directed.
Material & Labour for 150 mm thick (spread thickness), Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.
Material & Labour for 150mm thick (compacted thickness laid in two layers of 75mm each) WBM, with coarse aggregates of sand stone of grading 2 (63 to 40 mm size), spread, rolled and compacted to required gradient and camber with power roller exceeding 8 tonne but not exceeding 12 tonne complete all as specified and as directed.
Preparing unsurfaced water bound macadam by brushuing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tacking coat with cationic bitumen emulsion RS-1 grade @ 10 kg/10 sqmt of surface complete all as specified and directed by Engineer-in-Charge.
Material & Labour for bituminious premix semi dense asphaltic concrete 40 mm (compacted thickness) using graded crushed stone aggregate, premixed with binder (paving grade bitumen VG 30 grade) @ 5.5% by weight of total mix & hydraulic lime filler, rolled and compacted to required camber and gradient with power roller exceeding 8 tonne but not exceeding 12 tonne complete all as specified and directed. Note :- (i) Bituminous premix dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs 40 per kg.
M & L for with approved moorum, red bajri in road side berms as light wearing surfaces , n exc 150 mm thick, spread, watered, rolled and consolidated with power roller exceeding 8 tonne but not exceeding 12 tonne complete all as directed by Engineer-in-Charge
M & L for Painting lines, dashes, arrows, letters etc on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow line, painting shall stand out boldly and solidly without showing signs of brush marks or surface underneath until the desired result is obtained complete all as directed by Engineer-in-Charge.
Removing excavated soil to a distance exc 50m but n exc 250m & depositing where directed at a level n exc 1.5m above the starting point complete all as directed by Engineer-in-Charge..
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m deep; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc., n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Material & Labour for PCC 1:4:8, (type D2) using 40 mm graded stone aggregate as in foundation, filling, mass concrete etc complete all as specified and directed.
Returning & filling including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed by Engineer-in-Charge.
Material & Labour for laterite stone masonary of squared ruble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engineer in charge.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of squared rubble masonry, regular coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface, n exc. 20mm of squared ruble masonry regular coursed.
Material & Labour for rendering 15mm thick in CM 1:4 on stone masonry surfaces & finished even and smooth without using extra cement complete all as specified and directed by Engineer- in-charge.
Material & Labour for cement concrete 1:2:4 (type B-2), using 40mm graded stone aggregate in surface channels and drain complete all as specified and directed by Engineer- in-charge.
Material & Labour for cement concrete 1:2:4 (type B1) using 20mm graded stone aggregate as in coping including necessary use & waste of form work for fair finished surfaces complete all as specified and directed by Engineer- in-charge.
Material & Labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed by Engineer- in-charge.
Material & Labour for prepartion of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m deep; for laying of cable, erection of poles, stay and pipe line,etc., n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
Removing excavated soil to a distance n exc 50m & depositing where directed at a level n exc 1.5m above the starting point complete all as directed by Engineer-in-Charge..
Material & Labour for sand cushioning with dry and clean sand over and under the cable for protection of cable complete all as specified and directed. Note : Thickness of sand cushioning shall be measured after punning and consolidating of sand.
Material & Labour for brick protection cover to under ground cables with sub-class ‘B’ common burnt clay building bricks of designation 75 (Locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.
Supplying, laying, connecting, testing Cable, LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly , IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 10 Sqmm X 4 core, laid through duct/pipe/in trench etc with cable glands & suitable size of aluminium lugs complete all as specified and directed. Note:- Earth work, brick protection, sand cushioning and GI pipe shall be measured and paid separately under respective items.
Material & Labour for service cable PVC insulated, unsheathed, weather proof with 2 core, aluminium conductor, 4 Sqmm for street light service cable complete all as specified and directed. Makes for Item No. 24 & 25:(i) Cable Corporation of India, Mumbai, (ii) Havells india ltd, (iii) Universal Cables Ltd, Satna, (iv) Asian Cables (RPG), (v) Gloster, (vi) RPG Cables Ltd , Thane, (vii) Finolex, (viii) Polycab
Supply & install of terminal/junction box of size 200mm x 160mm x 98mm of polycarbonate thermoplastic, housing weather, water, dust proof, fire retardant with 4nos aluminium bus bar of rating 100 amps, mounted on porcelain/cast resing insulator with MCB 6 Amp, SP complete all as specified and directed. Make: National/ Sintex
Supply and erection steel tubular swaged poles complete with MS base plate, finial taper plug, bolts, nuts & screws as per IS-2713 Part -II 1980 complete as specified type 410 SP-31 (9 metres long) including painting with one coat of red oxide primer and two coats of aluminium paint over one coat of bituminous paint for embedded portion complete all as specified and as directed by Engr-in-Charge. Note :- Earthwork, PCC foundation and coping will be measured and paid separately under respective items. Make- 1. India Tube and Co 2.India Electric Poles Mfg Co Maharashtra 3 Bombay Tubes 4 The National Tubing Company, Kanpur 5 Kalinga Tubes 6 Singh Profile, Pune
Material & Labour for cement concrete 1:3:6 (type C2) using 20 mm grade stone aggregate for coping including weathering, slightly rounded or chamfered angles including necessary use & waste of form work for fair finished surfaces complete all as specified and directed by Engineer- in-charge.
Supply and fix GI Tubing, medium grade, 15mm dia for protection of cable on wall/pole, trenches/floors, road crossing complete including fittings complete all as specified and directed by Engineer-in- Charge.
Supply and fix GI Tubing, medium grade, 40mm dia for protection of cable on wall/pole, trenches/floors, road crossing complete including fittings complete all as specified and directed by Engineer-in- Charge. Make for Item No. 30 & 31- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)
Supply and fix LED Street light fitting 80 watt, new generation energy saving & enviormental friendly long lifie versatile pressure-die-cast aluminum IP65 Roadway luminaire with mid power LEDs as light source & electronic driver complete all as specified and directed by Engineer-in- Charge. Make - Havells, model- ENDURA CITYLINER NEO. Code- LHETAXU7PN6W080, Optic-General Spread or equivalent model of Philips/CG/Bajaj/WIPRO as aprroved by GE.
Material & Labour for bracket made out of GI pipe 25 mm dia medium grade, 1.2 metre long bent to shape fixed with MS flat iron clamps, made out of 40mm x 6mm thick, nuts, bolts complete all as specified and directed.
M/s Hari Construction
H.S.SIROHI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .