Package No.PNP-01/2022-23 - RGSA -2021- 22 Construction of New Panchayat Office Building at Edayapatty H/o Edayapatty in Peddanaickenpalayam Panchayat Union at Salem District.

Amount

1) Construction of New Panchayat Office Building at Edayapatty Panchayat

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Supplying and filling with river sand in layers of not more than 15cm thick for foundation

Supplying and Filling the foundation and basement with excavated earth in layers of not more than 15cm thick well rammed, watered and consolidated as directed by the deptl. officers. Complete complying with standard specifications.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete.

Brick work using second class Country bricks of size 8 3/4" x 4 1/4" x 2 3/4" in Cement Mortar 1:5 (one cement and Five sand) including curing, neat finishing, etc, complete complying with standard specification.

Foundation and Basement

Above Basement

Supplying and erecting, centering for sides and soffits including supports and strutting up to 3.29m height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheet etc., complete.

Foundation basement

Above Basement

Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of M.S. plain rods / RTS rods and binding wire)

Reinforced Cement Concrete of mix 1:11/2:3 (One cement, one and half sand and three aggregate) with water proofing compound of 2% by weight of cement used and using 20mm size machine crushed granite stone jelly etc., complete.

Foundation basement

Above Basement

Paving the floor with best quality Double charged Vertified tiles 600 x 600 x 8mm of approved colour, shade and quality laid in CementMortor 1:3 (one Cementand three sand) 20mm thick in all floors and the top pointed with the white Cementmixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing of Kotta stone for flooring size 610 x 610 x 20 mm including cost and labour fixing charges etc.,complete.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete

Supplying and fixing of Anti-Skid tiles for approved quality including cost and labour fixing charges etc.,complete.

Dadooing with white glazed tiles for approved quality of tiles including cost and labour charges etc.,complete

Weathering Course concrete with broken brick jelly of 20mm gauge in pure slaked lime to be laid in a single layer (No sand to be added) over roof slab the proportion of brick jelly to lime being 32 to 12.5cft by volume well beaten with wooden beaters etc., complete.

Finishing the top of roof with one course of New Machine Pressed tiles of approved quality of size 23x23x2cm laid in cement mortar base layer 1:3 (One cement and Three sand) 12mm thick mixed with water proofing compound etc., complete.

Special ceiling plastering with cement mortar 1;3. using 10mm thick in all floors etc.,complete.

Plastering with cement mortar 1;5, using 12mm thick in all floors etc.,complete.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats to new Irion works including cost and labour charges etc.,complete.

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Fabrication and supply of mild steel Window of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. - W

Fabrication and supply of mild steel Window of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. - W1

Towards cost and supply of Rolling shutter of size 1.20X2.10m

Supply and fixing of MS grill for Gate with 1500 x 2100 mm plate using 12 mm square rod including cost and conveyance and all other labour charges

Solid PVC Door shutter with frame using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Solid PVC Door shutter with frame using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete

Supply and fixing of Rain water PVC pipe of 110mm dia

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5 SD 25

Supply and fixing of energy efficient 11W lamp on the battern holder SD 80

Supply and fixing of WT bulk head fitting with guard for 11W CFL SD 84

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for Open plug point SD 10

Supply and Fixing of 32AMPS DPI Switch of 500 V SD 159

Supply and Fixing of TNEB Meter Board suitable for 32 A single phase Sc with 32 A fuse unit etc.., SD - 125

Supply and run off 2x1.50 sqm PVC unsheated Sc unsheated, copper conductor of 1100 V grade on 7/20 GI Bearer wire for service main SD - 64

Supply and run off 4x6 sqm PVC unsheated Sc unsheated, copper conductor of 1100 V grade for service main SD - 68

Supply and fixing of PVC water storage tank of 500 litres capacity etc complete

Supply and fixing in position of Indian water closet of size 580 mm x 440 mm etc. complete as directed by the departmental officers and complying with standard specifications (The water closet P or S trap are to be got approved by the Executive Engineer before use on works)

Supply and fixing in position of Europen water closet of size 580 mm x 440 mm etc. complete as directed by the departmental officers and complying with standard specifications (The water closet P or S trap are to be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best Indian make wash hand basin of size 550mm X 400mm and approved brand and quality with a pair of C.I. Brackets fixed to wall with necessary teakwood plugs and brass screws one No. of 15mm C.P. Pillar tap, 32mm C.P. Waste coupling, rubber plug and chain, 32mm G. I. Union, 32mmG. I. Waste pipe, 15mm dia G. M. Wheel valve 15mm brass nipple and nylon connection including cost of white lead TW Plugs clamps, rubber washer, etc., complete. (The wash hand basin should be got approved from the Executive Engineer before use on works). White glazed earthern ware wash hand basin without pedestal

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Thangam and Co