Periodical services for Md Accn under AGE B/R-II at Mil Stn Bikaner

Amount

Preparation of old decorated plastered or un plastered surface of walls including cornices, pilasters etc by brooming down etc and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge.

Preparation of old decorated plastered or un plastered surface of ceilings by brooming down etc and applying one coat of white wash complete all as specified and as directed by Engr-in-Charge.

Preparation of old decorated plastered or un plastered surface of walls by brooming down etc and applying one coat of colour wash complete all as specified and as directed by Engr-in-Charge.

Preparation of old decorated plastered or un plastered surface of walls by brooming down etc and applying two coats of colour wash complete all as specified and as directed by Engr-in-Charge.

Preparation of old decorated surface of walls including cornices, pilasters etc by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss and efflorescentsalts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surfaceand applying and applying one coat of distemper oil emulsion white or tinted complete all as specified and as directed by Engr-in-Charge.

Complete removal of existing treatment of walls including cornices, pilasters etc by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss and efflorescentsalts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surfaceand applying two coat of distemper oil emulsion white or tinted complete all as specified and as directed by engineer-in-charge.

Preparation of old decorated surface of walls including cornices, pilasters etc and applying one coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-Charge.

Painting to old wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces finishing with one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Painting to old steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces finishing with one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment of walls including cornices, pilasters etc by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss and efflorescentsalts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surfaceand applying two coat of cement based paint white or tinted complete all as specified and as directed by engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames of any thickness including punching or drilling out old glazing pins/springs clips all as directed by Engineer-in -charge.

Sheet glass 03 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane all as directed by Engineer-in -charge.

ditto- but figured glass pin head type complete all as specified and as directed by Engineer-in-charge.

Taking down cement or cement lime plaster/ terrazo finish of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge( Note : The quoted rates should be irespective of height contractor shall not made claim for same.)

Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge ( Note : The quoted rates should be irespective of height contractor shall not made claim for same.)

Rendering 10 mm thick in cement and sand mortar 1:3 on cement concrete surfaces as on ceilings including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Preparation of newly plastered or un plastered surface of walls including cornices, pilasters etc by brooming down etc and applying two coats of white wash on walls complete all as specified and as directed by Engr-in-Charge.

Preparation of newly plastered surfaces/walls putty surface of walls including cornices, pillasters etc and applying two coats of cement based paint of approved tint or color complete all as specified and as directed by Engineer-in-Charge

Preparation of newly plastered surfaces/walls putty surface of walls including cornices, pillasters etc and applying two coats of Distemper oil emulsion of approved tint or color on putty surfaces complete all as specified and as directed by Engineer-in-Charge.

Preparation of newly plastered surfaces of ceilings and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge

Preparation of old painted plastered or un plastered or concrete surface of walls of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Complete removal of old painted plastered or un plastered surface of walls of any description, including cornices, pillasters etc and applying two coat of weather proof emulsion (APEX of Asian paints or equivalent quality), complete all as specified and as directed by Engineer-in-Charge.

15 mm thick rough cast plaster in Cement mortar 1:4 consists of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with course sand and cement in the ratio of 1:1:1 complete all as specified and as directed by Engineer-in-Charge.Note: The rate quoted shall be deemed to include for necessary use and waste of form work if required and nothing extra shall be paid on this account).

Writing letter or Figuers (Blocks Romas, Italic or Indian Style) height of letter not exc 30cm in height complete all as specified and as directed by Engineer-in-Charge

Applying single thin layer of 2 to 3 mm walls care putty on walls over a coat of suitable primer as per manufacturer instruction, complete all as specified and as directed by Engineer-in-Charge.

Removing up rooting vegitation growth building roof top/sides of walls nexc. 30 cm girth including and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 cm and clearing site and making good of the disturbed surfaces in brick work cm 1:4 and plaster in 1:4 ,surfacearea nexc 0.50 sqm.(Note: For removal of vegitation if reqd at site rain water pipes bends to be removed preserved and refixed in the same location.)

SUBHAM ENTERPRISES

m/s gaurav enterprises

Hariom Traders