Revenue work at Dalhousie cantt

Amount

Sch 'A' B/R Part-I:- Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard / soft soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing excavated surplus soil not exc 50 m and depositing where directed at level n.exc 1.5 m above the starting point. complete all as specified and directed by the Engr -in-charge.

M&L for Plain Cement Concrete Type D-2 M-7.5 (using 40 mm graded granite crushed stone aggregate) in foundations, filling and mass concrete.

M&L for 75 mm thick Cement concrete type D 2, M-7.5 (using 40 mm graded granite crushed stone aggregate) in sub base of flooring/ hard standing.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.

M&L for Reinforced cement concretetc M-25 using 20mm graded crushed stone aggregate as in floor or roof beams Note:-TMT bar shall be masured and paid sepratly

Use and waste of formwork for foundation beams floor beam roof beam etc as in lintel over 1.5m clear span. for rough finished surfaces

Mild steel TMT bars 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beams,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders

M&L 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed.

M & L Rendering 10 mm thick in cement mortar (1:3) as in bedding layer for laying of tiles in vertical surfaces complete all as specified & directed.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18 sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match

M & L glazed, ceramic, coloured tiles of size450x350x7mm thick, on vertical surfaces such as skirting, dados etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement.

Preparing newly plastered surfaces of walls and applying three coats of white wash.

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

S & F aluminium handle 125 mm long anodised, cast type fixed complete.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane .and extra over sheet glass'ordianry quality if sheet glass is ground orobscured or frosted.on one side

S&F Steel window or ventilators with top hung shutter including hinges,steel pegstay complete all as specifid and directed

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 110mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 75 mm bore PVC (SWR) bends any radius.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 110 mm bore pipe as directed.

S & F 15 mm bore galvanized steel tubes, medium grade with all fittings complete fixed to walls and ceilings or laid in floors as specified.

S & F 15 mm bore Bip taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F stop valve15mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs.

S&F , 20 mm bore, ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule. complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S & F in repair vitreous china squatting pan "orissa pattern, size 580x440mm white , with integral foot rests(excluding flushing cistern and flush pipe) including provison of lean concrete bedding connection to drain out pipe, to flush pipe and antisyphonage pipe etc, complete all as specified.

S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe.

S&F PVC (SWR) 100mm dia floor trap, plain with grating including jointing with solvent cement.

S&F in repairs 4mm thick non asbestos fibre cement bldg boards as in ceiling including two coat of colour wash, placed on powder coated aluminum anodised snap grid frame work false ceiling of gird size 605mmX605mm of texture and finish as approved by AGE(I). The frame shall be as per drg no std/809/07, SH No 32/44 dt 03.11.2007 and comprising of following:- (a) wall powder coated aluminum anodised angles of size as shown on drg shall be mounted at pusing PVC dash fasteners with full threated dry wall screws placed at c/c. (b) Suspended powder coated aluminum anodised main runner (size38mmX24MM bulb T-section) From the ceiling with 4mm dia GI Wire at@ 1200 C/C as shown on drg level shall be adjusted with adjustments to secure. (c) powder coated alumium anodised cross tees 1200mm long (28mmX24MM bulb t-section shall be placed in position @ 610mm C/C using snap and baynoet fixing arrangements to secure main runners. (d) False ceiling shall be provided at site as per drg and in consultation with manufactres.

S&F 2nd class hard wood, plain, solid straight chowkhets and frames, wrought framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete.

S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets.

3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed.

S&F 150mm long aluminium handles cast type, anodised and fitted.

S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete.

M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum , getting out, returning, fillingin and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in hard/dense soil.

M&L for cement concrete type C-2 M-10 (Using 40mm graded crushed stone aggt) in foundation filling/post hole and mass concrete f all as specifide and directed.

S&F Roof trusses (framed work), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410-W(Gde-E-250 ) quality A and complete all as specified and directed by the Engr -in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screw complete all as specified and directed by the Engr -in-charge.

M&L preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer complete all as specified and directed.

Surface excavation not exc. 30 cm deep and and avg 15 cm deep and getting out in hard/soil

M&L for hardcore of gauge n exc 63mm (broken stone or bolder) , deposited, spread and levelled in layers n exc 10cm thick, watered and rammed to a true surface. complete all as specified and directed by the Engr -in-charge.

M&L for 100mm thick PCC M-7.5 Type C2 ( 40 mm graded crushed stone aggregsate) as in subbase and pavings etc all as specified.

M & L for 100mm thick PCC M-15 Type B2 ( 40 mm graded crushed stone aggregsate) as in subbase and pavings etc all as specified.

Sch 'A' E/M Part-II:- M & L for point wiring with copper conductor single core cable FRLS multistrand, PVC unsheathed 1.5 Sqmm size for one light point or bell point controlled by one switch including one run of 1.5 Sqmm single core multistrand PVC unsheathed copper conductor cable FRLS for earth continuity in and including concealed PVC conduit non rigid of approved size, make and quality ISI marked, including providing suitable size of copper lugs and all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring'".fixed on walls/ceiling including sunk cast iron boxes flushing (grouting)/ concealing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and directed.

Supply & Fixing Switch piano, flush button, single pole one way 5 amps.

Supply and fix ceiling rose 65X50 mm two to three terminals complete all as specified.

S&F Wall mounted LED integrateg batten fitting T5, 20 W LED, 4 feet, PVC extruded. Of make Havells Cat part No LHEXBXPNIN1W020/ C&S cat part No. LTTB 4F20WLED P/W /Crompton Cat part No. LDLSR20-CDL including square box and all accessories complete all as specifiedand as directed,

S&F Wall mounted LED integrateg batten fitting T5, 10W LED, 2 feet, PVC extruded.of make Havells Cat part No LHEXBXPNIN1W010/ C&S cat part No. LTTB 2F 10W LED P/W / Crompton Cat part No. LDLSR10-CDL including square box and all accessories complete all as specifiedand as directed,

S&F mirror optices linear & compact 9W mirror light with decorative gray end caps, polycarbonate body and ribbed opal diffuser complete all as specifide and as directed by Engr-in-charge.

S & F LED bulk head light fitting 10 watt complete of make Havells Cat part No LHEOAOP7UZ6W010/ Philips cat part No. WT202WLED65NWPSUS2PC /Bajaj cat part No. BIBWP10WLED complete all as specifiedand as directed,

Supply & Fixing Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 4 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's kitkat fuse/MCB SPN/SP as directed by Engineer-in-charge. Cat Part No CSDBSPNDDA2+04 of C&S/ Cat part No. DHDPSHODPW04 of havells/ Cat part No 6077 10 of legrand.

Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed. Make Havells Cat Part No DHMGCSNF006-32/ C&S cat part No CSMBS1C6N TO CSMBS1C32N/ Legrand Cat part No. 4086 09 06 to 4086 17 032

Supply and fixing inreplacement MCB single pole 6 to 32 Amps, 240 volts all as specified and directed. Make Havells Cat Part No DHMGCSPF006-32/ C&S cat part No CSMBS1C6 to CSMBS1C32/ Legrand Cat part No. 4085 87 06 to 4085 95 032

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground (earth pit not less than 2.5 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including Rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board/upto main DB including testing on completion all as specified and directed.

M&L for exhaust fan matelic body 300mm sweep complete with louvers and all fixing accessories including connection complete all as specified and as directed .Make:-Havells/Crompton/Philips

Supplying and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of follwing size:- size 10 Sqmm, 2 Core

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for taking out/laying of cable etc including getting out in any type of soil and taking out bricks and cable complete all as directed by Engr in Charge.

Returning filling–in and including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engr in Charge.

Removing of surplus excavated soil n exc 50 mtrs and depositing where directed at a level n. exc 1.5 mtr above the staring point all as specified and directed by Engr in Charge.

Material and labour for sand cushioning to underground cable 8 cm thick layers below the cable and 15 cm thick above the cable in trenches using fine screened river sand complete all as specified and directed by Engr in Charge. (Note:-Punned thickness shall be measured and paid)

Material and labour for well burnt sub class 'B' bricks of nominal size 230X115X075 mm abutting each other for cable protection all as specified and directed by Engr in Charge.

M&L for 40 mm GI tubing light grade galvanized with all fittings for protection to U/G cable along poles, walls, flows, road crossing including necessary cutting of road and making good in original surface where required all as specified and directed by Engr-In-Charge. Note:-cutting of road, making good in original surface with PCC 1:3:6 deemed to be included in quoted rate

m/S Varun Gupta

Pathania Builders