Internal and External Electrification work of Stadium at Gole Gujral Talab Tillo Jammu.

Amount

Wiring for light point/ fan point/exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4sq. mm + 1 X 4 sq. mm earth wire

2 X 6sq. mm + 1 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

3 x1.5 sq mm

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of Recessed conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6Amp Switch

3 pin 5/6 Amp socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

12 way , Double door

Supplying and fixing 5 amps to 32 amps rating, 240 Volts, 'C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Supplying and fixing following Electrical items complete with connections as required.

MCB SPN 40 Amp

MCB SPN 63 Amp

Angle/Batten Holder

Phenolic laminated round sheet 4" dia average

Aluminium cable twin core 10 sq. mm

Aluminium cable twin core 16 sq. Mm

Aluminium 3.5 core 35sq. mm

4 core Aluminium cable 16 sq mm (armoured)

Supply, installation, testing & commissioning of GI Electrode Earthing with 50 mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Supplying, installation, testing & commisioning of Lightening fixtures.

20/22 watt LED 4 feet tube light fitting/fixture CRCA housing with 2000 Lumens and min lumens efficiency 100 Lumens/watt P.F 70.95 THD < 16% & voltage input range 140-270 V with Shot circuit & overloading protection circuit off

Supply of 1200 mm sweep 230V 50Hz celing fan with double ball bearing with low power consumption (5 star rating)

Supply of following sizes of heavy duty exhaust fan as per approved makes

300mm Sweep

Supply, Installation, Testing and commissioning of suitable size double dood outdoor pannel made out of CRCA sheet, vermin and dust proof and complete with one no MCCB FP 100AMP 25k, Change over switch 100 Amp aluminium buss bars 200 amp 2 sets/ MCB strip form housing of 20 Nos MCB 1 No.Digital Energy Meter for Measurement and display(LED/LCD) of Current,Current Transformer set having Ratio of 160/5, set of protection MCBs

Supply, Supply and fixing of suitable size double door Weather proof outdoor type main pannel made out of CRCA sheet, vermin and dust proof including providing and fixing of 1 no 63 Amp FP MCB digital timer switch, suitable rating contactor. aluminium bus bar 1 set and MCB STRIP for housing 12 nos MCB uncluding connection etc as requires

Surface/recessed square/round LED Panel 11/12 watt

Supplying and fixing of ENDURA PEARL 30W MP new generation energy saying and enviromental friendly long life LED stret light made up of pressure die cast aluminium housing with high efficent LEd as lighting source and PC cover hsving TOP Opening seperate drive compartment with IPG protectionand impact resisitance of IK07 complete with M.S/ GI pipe bracket duly embeded along the parapet /wall including complete connections as required.

Supplying and fixing 4 sq mm 3 core copper conductor cable in the existing surface/ recessed pvc conduit.

High Mast light Supply,Installation,Testing and Commissioning with transportation at site of 1 No. 11 mtr High Mast Pole suitable for 6 Nos. Luminaries installation symmetrically alongwith junction box, cross arm/ suitable ring for Luminaires including foundation accessories. The High Mast pole shall have an intigral power tools installed inside the base compartment for the operation of luminaires. Wiring with 3 x 2.5 sq.mm PVC insulated copper conductor from junction box of pole to luminaires alongwith installation charges includes in the mast supply price. The erection of pole with all accessories shall be with the help of suitable equipment or with help of modern engineering practice. The specifications of pole is as under. Length Section Bottom 5.6 Mtr. Middle 2.7 Mtr. Top 2.7 Mtr. Outside Diameter. Bottom 165.1 x 4.50 mm. Middle 139.7 x 4.50 mm Top 114.3 x 3.65 mm Approx. weight of Pole 147 Kgs. Base Plate 600 x 600 x 8mm Tensile Test - Tensile Strength 540 Mpa (55 Kgf/Sq.mm). And with Technical Parameters as Physical Requirement The material when tested in accordance with IS: 1894:1972 shall have minimum tensile strength of 42 Kgf/mm and confirming IS 1894: 1972.

Protection Against Corrosion. The poles shall be coated with black bituminous paint confirm to IS 158-1968 throughout internally and externally upto the level i.e 1/6 of the total length which goes inside the earth. Tolerance. Outside diameter of poles as nearly circular as possible and their diameter shal l not vay by more than 1%. Earthing. Nut 10 mm dia shall welded on pole at the height of 400 mm from planting depth. Steel should be of good quality of weight 7.85 g/cum factor of safety on cripplilating load 2 and factor of safety on breaking load is 2.5 size of the base plate duly welded at bottom. The mast shall have 4 No 32 mm dia wholes at 2.54 above the base plate suitable to accommodates 6 to 8 Nos. of 3 core x 2.5 sq.mm Cu conductor cables from control panel to luminaries dia of adjustable ring = 1800mm dia of the steel pipe of the ring =50 mm 4Nos. of support of 50mm dia pipe duly welded between inner periphery of the ring and the cap. The pole is to be errected in c. concretc in the ratio of 1:2:4 mix. The fondation is to be continued upto 2' above groung level in square/round shape. The length and diameter of the cap of the adjustable ring is such that showed be well fixed in top of the mast and give an overall aesthetic look to the mast. The cap of the ring shall have 6 Nos. holes welded suitably with 6 Nos. nuts to facilitate tightening of the top of the mast.

Supply,Installation,Testing and Commissioning of LED Luminarie 150 watt

Supplying & laying of 1.1 kv grade PVC insulated and PVC sheathed XPLE armoured Aluminium conductor cables of 16 Sq.mm (twin core) including excavation of earth and refilling the same after laying the cable.

Supplying & laying of G.I pipe 50 mm diameter

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required..

Providing and fixing 25 mm X 3 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 3 mm copper strip on surface or in recess for connections etc. as required.

Design, Supplying, installation ,testing and commissioning of high mast feeder pillar panel (outdoor type) made up of 2mm thick sheet steel, compartmentalized complete with incomer MCB SPN 63 Amp 10 KA & out going 16 Amp MCB SP 6 Nos., Aluminium bus bar of the required rating, specifications, contactor and timer of suitable rating of reputed make and 2 KVA servo voltage stabilizer complete job.

M/S ULTIMATE POWER SOLUTIONS

Mandeep Sharma

M/S NEW LIFE ENTERPRISES