e-Quotation Notice No.02 for 2025-26

Amount

Supply and Installation of 3mm thick roofing Shingles of Flexible Sheet Formulated with high Grade asphalt membrane sheet having 3ft x1ft in size with application of bitumen primer. Shingles sheet Should be fitted on 18 mm thick Cement Sheet with all scaffolding and as directed by Engineer in charge etc. Complete. (Rate including Supply and Installation of 18 mm Cement Sheet)

Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 16 mm thick of 1200mm (min.) width with angular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility & strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers

Providing and fixing modular toilet cubicle partitions of approved design and color, made from 12mm thick high pressure compact laminate (HPL) board conforming to EN 438/IS 2046, supported on stainless steel (SS 304 grade) hardware including adjustable legs, U-channels, coat hooks, door knobs, privacy indicators, hinges, and all necessary fittings. The cubicles shall be fixed with stainless steel brackets anchored to wall and floor using approved fasteners. The work includes all cutting, fixing, finishing, and cleaning the site etc., complete as directed by the Engineer-in-Charge.

Supply and Installation of 24 inch dia turbo ventilator with Aluminium profile base Specification of Turbo ventilator 1. Neck/Throat dia - 24" 2. Blade material - Aluminium 3. Number of blades - 46 nos 4. Blade thickness - 0.50 mm 5. Top cover material with size - Aluminium (420 mm) 6. Bottom ring material with size - SS (610 mm) 7. Bottom ring cross material with sizes - 2 mm SS (610mm) 8. Centre shaft material with size - SS (12mm) 9. Number of bearings, type of seal and make - 2 nos (HCH 6100 RS) 10. Min operational wind speed in kmph - 0.50 kmph 11. Max sustain wind speed in kmph - 10 kmph 12. Fins and Rivets - Aluminium 13. No. of fins - 38 nos 14. Total weight of Aluminium turbo ventilator - 4.3 kgs 15. Total height of turbo ventilator with base - 875 mm and as directed by Engineer in charge etc. Complete.

Drilling ,Pouring of Epoxy grout and fixing of Anchor bolt GM 16 X 1000 8.8 ZP Threaded Rod FISCHER or Any Make ,FIS VL 360 S FISCHER or Any Make,M16 NUT & WASHER SET ICFS MAKE and as directed by Engineer in charge etc. Complete.

SAGAR VINCHU (BID ID -6656117)

ABHISHEK SURYABHAN SADGIR (BID ID -6656183)