Repair and Maintenance of Wireless CCTV Camera in main mandi yard under KUMS Khairthal

Amount

IR Color IP Bullet Camera

Supplying, Installation, Testing and Commissioning of Network (IP) Bullet IR Camera’s Including with supported accessories Like Stand, Mounting kit, Connector, Cables etc. complete in all respect mounting on existing PCC/Tubular Poles as required by Engineer-incharge including weather proof outdoor camera housing.

a. Image sensor = 1/2.8" Progressive scan CMOS sensor with WDR.

b. Resolution = 1280 x 1024

c. Mega Pixel = 2 Mega Pixel ; 1280 X 1024 @ 30FPS

d. Lens = 3-10.5 mm varifocal,

e. Minimum Illumination = Colour- 0.5 Lux @ 30IRE, Black & White - 0.05 Lux @ 30IRE,

f. IR Illumination = Inbuilt / External 35mtr range IR illuminator

g. Audio Input/Output = Yes

i. Compression = Dual H.264 compression standards.

j. Wide Dynamic Range = 90 db or more

k. Day/Night Camera = Auto day/night configuration.

l. Stream Configuration = Min 30 Frames per second for both the streams with following configuration 2048 X 1536 @ 30FPS @ H.264 for primary stream ; 1280 X 720 @ 30 FPS @ H.264 for secondary team simultaneiusly

m. Web interface = Camera should have web interface to configure and control.

n. Alarm input = One day alarm input & output.

o. Edge Storage = Provision for 64GB SD Card.

p. Ethernet, Network protocols = 10/100 Tx Auto sensing (half/full duplex), 802.3af class 3 PoE, IPv4/v6, Unicast, Multicast, RTP, TCP, UDP, HTTP, IGMP, ICMP, DHCP, DNS, ONVIF.

q. Operating Temperature = 0 to 45 C Degrees.

r. Operating Humidity = 20 to 80% RH non-condensing.

s. Regulatory Approvals = CE/FCC/ROHS

t. Make [any one of the specified] = Honeywell, Sony,Bosch,Pelco

Wireless CPE with Weather Proof Box

Supply, Installation, Testing and Commissioning of Customer Premises Equipment(CPE) with supported accessories Like Stand, Mounting kit, DC and RJ45 Connector, LAN and Electrical Cables etc. complete in all respect Mounting on Existing PCC/Tubular Poles. as required by Engineer-incharge for feeding required CCTV Camera links.

A) Wireless CPE

a. WLAN standard = IEEE 802.11a/n, b/g/n

b. Radio mode = MIMO 2x2

c. Operating modes = Access point (auto WDS), Station, Station WDS, Access Point, Station

d. Radio frequency = 5.8GHz

e. Transmit power = Upto 29dBm

f. Receive sensitivity = Varying between -95 and -75 dBm depending on modulation

g. Channel size = 20, 40 MHz

h. Modulation schemes = OFDM (64-QAM, 16-QAM, QPSK, BPSK)

j. Duplexing scheme = Time division duplex

k. Antenna type = Integrated dual-polarized antenna

l. Wired interface = 10/100/1000 Base-T, RJ45

m. Surge Protection = Built In

n. Operating modes = Bridge, Router

o. WAN = Static IP, DHCP client, PPPoE client

p. NAT = Routing w/ or w/o NAT

q. Static routing = Supported

r. DHCP = Client, Server, Relay

s. Port forwarding = Supported

t. VLAN = Supported for management and data

u. System configuration = User-friendly web GUI, Command line via SSH centralized Wireless Network Management System, reset via reset tool

v. System monitoring = SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap

w. Power supply = 12 - 24 V DC passive Power over Ethernet(POE)

x. Power source = 100V – 240V AC via included adapter

y. Power consumption = 15 W

z. Enclosure = IP67

ab. Make [any one of the specified] = Motorola/ WISNETWORK/Engenius/Alcon/CISCO/ALCATEL

Bidder Name

Amount

SOLUTION AND SOLUTION

GANPATI COMMUNICATION SERVICES

INFINTY ELECTRICAL SOLUTIONS

INFINTY ELECTRICAL SOLUTIONS

SOLUTION AND SOLUTION

INFINTY ELECTRICAL SOLUTIONS

GANPATI COMMUNICATION SERVICES