Construction of Mdache Gaon Mahitiche Dalan at village Shelmoha. Tq. Gangakhed and Dist. Parbhani

Providing and laying cast in situ / Ready mix , cement concrete in M10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, form work, compacting, roughing them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reverisble drum type mixer/concrete batch mix plant (pan mixer) etc complete finishing if required and curing etc. complete. Spec. No. : Bdf3. SSR I.No. 24.01. Page. no. 217

Providing and laying in situ / Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete columns as per detailed design and drawing or as directed including steel centreing, formwork, , cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complte (excluding reinforcemetn anf structural steel) etc. complete with fully automatic micro processor based PLC with SCADA enabled reverisble drum type mixer/concrete batch mix plant (pan mixer) etc complete with fine aggregate (Natural sand / CRushed sand VSI grade finely washed etc ) finishing if required and curing etc Spec. No. : Bd.F.5 Page No. 300. and B.7 , Page. No. 38 S.S.R.I. I.No. 25.31 Page. No. 222.

Providing and laying in situ / Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed design and drawing or as directed including steel centreing, formwork, , ocver blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complte (excluding reinforcemetn anf structural steel) etc. complete with fully automatic micro processor based PLC with SCADA enabled reverisble drum type mixer/concrete batch mix plant (pan mixer) etc complete with fine aggregate (Natural sand / CRushed sand VSI grade finely washed etc ) finishing if required and curing etc Spec. No. : Bd.F.6 Page No. 300. and B.7 , Page. No. 38 S.S.R.I. I.No. 25.50.

Providing and laying in situ / Ready mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed design and drawing or as directed including steel centreing, formwork, , ocver blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complte (excluding reinforcemetn anf structural steel) etc. complete with fully automatic micro processor based PLC with SCADA enabled reverisble drum type mixer/concrete batch mix plant (pan mixer) etc complete with fine aggregate (Natural sand / CRushed sand VSI grade finely washed etc ) finishing if required and curing etc Spec. No. : Bd.F.8 Page No. 302. and B.7 , Page. No. 38 S.S.R.I. I.No. 25.70

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR I.No. 26.05

Filling in plinth and floors with contractor's soil, sand or murum in 15 cm. to 20 cm. layers including watering and compaction etc. complete. Spec. No. : Bd.A.11 Page No. 263. SSR I.No.21.37

ᤂ픀牐癯摩湩⁧湩整湲污挠浥湥⁴汰獡整⁲㈱浭琠楨正椠楳杮敬挠慯⁴湩挠浥湥⁴潭瑲牡ㄠ㐺眠瑩潨瑵渠敥畲映湩獩⁨潴挠湯牣瑥⁥牯戠楲正猠牵慦散ⱳ椠污潰楳楴湯⁳湩汣摵湩⁧捳晡潦摬湩⁧湡⁤畣楲杮攠捴‮潣灭敬整‮卄⁒⹉潮‮㈳〮頴
牐癯摩湩⁧湡⁤慬楹杮瘠瑩楲楦摥洠物潲⁲ 汧獯祳映湩獩⁨楴敬⁳敤潣慲楴敶琠灹⁥栠癡湩⁧楳敺㔠〹洠潴㘠㔰洠⁸㤵‰浭琠〶‵浭漠⁦‸潴ㄠ‰浭琠楨正敮獳愠摮挠湯楦浲湩⁧潴䤠⹓ㄠ㘵㈲㈭〰‶
牧畯⁰求⥡漠⁦灡牰癯摥洠歡ⱥ猠慨敤愠摮瀠瑡整湲映牯映潬牯湩⁧湩爠煥極敲⁤潰楳楴湯氠楡⁤湯愠戠摥漠⁦㨱‴散敭瑮洠牯慴⁲湩汣摵湩⁧敮瑡挠浥湥⁴汦慯ⱴ映汩楬杮樠楯瑮ⱳ挠牵湩⁧湡⁤汣慥楲杮†瑥⹣挠浯汰瑥⹥愠
汆潯楲杮䐠剓䤠丮⹯㌠⸳〴ĩ倀潲楶楤杮愠摮映硩湩⁧牏獩慳琠灹⁥桷瑩⁥汧穡摥攠牡桴湥慷敲㔠㔷洠慷整⁲汣獯瑥瀠湡椠据畬楤杮匠琠慲⁰楷桴攠牡桴湥慷敲映潯⁴敲瑳ⱳ挠獡⁴物湯猠楯湡⁤敶瑮瀠灩⁥灵潴漠瑵楳敤映捡⁥景琠敨眠污㨱㨲‴牢捩慢⁴楬敭挠湯牣瑥⁥敢摤湩⁧楷桴畯⁴汦獵楨杮琠湡湡⁤瑩⁳捡散獳牯敩⁳瑥⹣挠浯汰瑥⹥䐠剓䤠丮⹯㐠⸲〳刀浧ǁЈ䔀捸癡瑡潩潦⁲潦湵慤楴湯椠慥瑲ⱨ猠楯獬漠⁦污祴数ⱳ猠湡Ɽ䜠慲敶湡⁤潳瑦洠牵浵‬湩汣摵湩⁧敲潭

据畬楤杮渠捥獥慳祲猠慣晦汯楤杮愠摮洠楡瑮湥湡散映牯㌠礠獲映牯愠祮氠慥慫敧⁳牯搠獩潬慣楴湯⁳景瀠灩獥‮汁桴⁥⹐⹖⹃映瑩楴杮⁳湡⁤摡楤楴湯污㈠瀠敩散猠捯敫⁴汣灩⁳桳污敢朠瑯愠灰潲敶⁤牦浯攠杮湩敥⁲湩挠慨杲⁥瑥⹣挠浯汰瑥⹥†卄⁒⹉潎‮㈴㠮䀷
牐癯摩湩Ⱨ氠祡湩⁧湡⁤楦楸杮倠嘮䌮‮楰数漠⁦㔱浭搠慩‮楷桴映瑩楴杮⁳畳档愠⁳敢摮ⱳ琠敥ⱳ爠摥捵牥ⱳ挠慬灭ⱳ攠捴‮湩汣摵湩⁧敮散獳牡⁹硥慣慶楴湯‬牴湥档映汩楬杮攠捴‮潣灭敬整‮湉汣摵湩⁧敲潭楶杮攠楸瑳湩⁧楰数氠湩⁥晩渠捥獥慳祲愠摮挠湯敶楹杮愠摮猠慴正湩⁧桴⁥慳敭椠坐⁄档睯祫漠⁲獡搠物捥整⁤瑥⹣挠浯汰瑥⹥䐠剓䤠丮⹯㐠⸲ㄲr倀潲楶楤杮猠慯楰⁴景猠穩⁥㈱挰⁸㈱挰⁸㈱挰湩汣摵湩⁧硥慣慶楴杮愠摮映汩楬杮眠瑩⁨牢捩⵫慢獴‮卄⁒⹉潎‮㈴ㄮ猹
牐癯摩湩⁧湡⁤楦楸杮眠楨整朠慬敺⁤慥瑲敨睮牡⁥慗桳䠠湡⁤慂楳景㔠挵⹭砠㐠‰浣‮楳敺椠据畬楤杮挠汯⁤慷整⁲楰汬牡琠灡振汯⁤湡⁤潨⁴慷整⁲楰汬牡琠灡戠慲正瑥ⱳ爠扵敢⁲汰杵⁳湡⁤牢獡⁳档楡Ɱ猠潴⁰慴⁰湡⁤敮散獳牡⁹楰数挠湯敮瑣潩獮椠据畬楤杮倠嘮䌮‮慷瑳⁥楰数愠摮琠慲⁰灵琠桴⁥畯獴摩⁥慦散漠⁦桴⁥慷汬‮慍楫杮朠潯⁤桴⁥慤慭敧⁤畳晲捡ⱥ琠獥楴杮攠捴‮潣灭敬整‮卄⁒⹉潎‮ㄴ㘮ᄳ
牐癯摩湩⁧湡⁤灡汰楹杮琠潷挠慯獴漠⁦敬摡稯湩⁣慢敳漠汩瀠楡瑮戯瑩浵湩潩獵瀠楡瑮漠⁦灡牰癯摥挠汯畯⁲湡⁤桳摡⁥潴漠摬眠潯⁤潷歲愠摮映扩牥戠慯摲⁳牰癥潩獵祬瀠楡瑮摥椠据畬楤杮椠⁦敮散獳牡⁹捳晡潦摬湩Ⱨ瀠敲慰楲杮琠敨猠牵慦散攠捸畬楤杮瀠楲業杮挠慯⁴瑥⹣†潣灭敬整‮卄⁒⹉潎‮㔳̳〮楌

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of contractor, work completion and liability period etc, having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25m) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbos etc with approved colour shade paint complete, on M.S. angle of size 3 x 35 x 3 mm frame with properly cross braced M.S angle of size 35 mm x 35 mm x 3 mm duly painted including two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling transportatiion, and labour etc complete Spec. No. As directed by engineer in charge MORTH 801 S.S.R. I.No. 6.96