Construction of 11 KV U/g, O/h line Feeder Bifurcation along with loading and unloading work under the Different Extende Area of EUDD BM and MH, Pyg. under Summer Plan of B.P. Year 2023-24

Amount

Fixing & grouting of stay rod with cement, sand and bricks ballast in ratio 1:4:8 and fasteniong the stay wire with pole and stay rod nozzling.(Grouting material will be arranged by the contractor)

Earthing of support complete with the help of M.S. rod 16 mm dia and 2.5 mtr. long, fastening of GI Strip of size 50x6 mm with clamp. with clamps/X-arm/support to M.S. earth rod. (All material will be arranged by the contractor as per Resspo and Electrical Safety rule)

Errection&Commissioning of 11 KV,3X185/120 sq.mm XLPE Cable with hanging arrangement (with the help of stay wire). all required Local materials arranged by the contractor as per Resspo and Electrical Safety rule.

Fixing and providing of Heat Shrink cable type end Terminations suitable for 11 KV, 3x185/120sq mm XLPE cable and 11 KV 3X185/120 sq mm ISI mark jointing kit will be arrange by the contractor as per Resspo and Electrical safety rules.

Outdoor/indoor jointing kit

Straight through jointing kit

Hoisting of 11 KV 3x185 sq mm XLPE cable providing GI pipe of size 6” dia 3 M long on double pole including its jumpering, complete with providing all required material arrange by contractor with one year gauranty as per Resspo and Electrical safety rules.

Erection, grouting, plinthing, paintimg & earthing of 11 mtr long single pole with 1 no 'v' cross arm/LT x-arm including fixing of necessary clamps, other accessories like guarding angle ,disc insulator with fitting, pin insulator, L.T arm, shackle insulator etc. for construction of single circuit 11 KV & double circuit LT line, grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly (Grouting & plinthing material will be arranged by the contractor)

Erection, grouting, plinthing, painting & earthing of 11 mtr long double/section pole including fixing of necessary clamps, other accessories like channel, disc insulator with fitting, pin insulator L.T arm, shackle insulator etc. grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly (Grouting & plinthing material will be arranged by the contractor)

Spreading and stringing of 1 stay wire continuous for Hanging of 11 KV cable including binding of insulator,clamp etc complete in all respect. (All required material will be arranged by the contractor except Stay wire as per Resspo and Electrical Safety rule)

Dismantling of all the HT/LT line, connections & earthing of old 11/.4 kV,250 transformer along with LT cubical box, cable GO set, DO set & T/F, safe loading carrage and unloading of dismentled item from site of work to center store Naini/Power House store/Dump site.

Laying of single 11 KV 3x185/120 sq mm XLPE cable by machine drilling method. The cable shall be laid at the depth of 900 mm from the surface of road. (The rates must be quoted for each cable of length per mtr.)

Installation of 11 KV VCB outgoing in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. Fixing of 11 KV switchgears rag bolt with proper connection, control cable provided by contractor. 11 KV VCB provided by Deptt.

J.L. Enterprises

M/s Hari Om Enterprises

M/s PRABHAT ENTERPRISES

PRANIKA ENTERPRISES

Urmila Associates

M/s A.E. Enterprises

M/s Samdariya and Company

D N S ENTERPRISES

M/S VINAYAK ASSOCIATE