Kharal Laying of DI pipeline in balance streets providing balance FHTC addl structures repair of ww structures

Amount

Construction of 1.00 MLD rapid sand filtration plant comprising of labour for DI pipe from existing raw water main/pump, inlet channel alum dozing, flash mixing, tapered flocculate rectangular setting tank, filter box, over head reservoir for back wash including pump sets & electric control panel, sluice valves, DI pipes, DI specials, manholes covers, air scour equipment, chemical house including chlorination equipment & arrangement of flow measurement & sandbed complete in all respect as per DNIT. labor rate for fixing DI, S/S class K-9 ISI marked pipes including cost of DI specials / fitting ISI marked PN 1.6 sluice valves including cost of excavation, laying, cutting, jointing, threading & jointing material in horizontal length including connection complete in all respect. From existing raw water main pump to inlet box of filter unit to clear water tank, Note- DI pipe will be supplied by the department free of cost ( Based On SCADA system-1.00 MLD WTP)

Supply and erection of Horizontal spindle spilit casing type pumping sets of minimum four (4) star rating durites directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase, 50Hz and accessories as described in Schedule No. II complete in all respects with priming arrangement with complete base frame. A) Raw Water pump set 1200 LPM 35 mtr. Head

A) Raw Water pump set 1100 LPM 12 mtr. Head ( At W/W)

A) Clear Water pump set 2800 LPM 40 mtr. Head

A) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm having following items. A) For Raw water Pump set for 1200 LPM x 35 Mtr. head = 2 Nos. (a) Main switch 63 Amp. 2 no. (L&T Siemens, ABB) (b) Volt meter 100 x 100mm range 0 to 500 volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100 x 100mm range 0 to 100 volt 2 no. (AE/KAPPA/L&T) (d) CT 100/3 Nos. (AE/KAPPA/L&T) (e) VSS&ASS 1no. & 2 Nos of approved make (f) SPP 2 no. of approved make (g) Motor starter, star delta 2no. for 1200 LPM x 35 M Head Motor (L&T Siemens, AAB) (h) Capacitor of suitable capacity = 2 Nos. (i) Indicating Lamp = one set. (j) Change over switch 63 Amp = 1 No.

B) For Raw water Pump set for 1100 LPM x 12 Mtr. head = 2 Nos. (a) Main switch 63 Amp. 2 no. (L&T Siemens, ABB) (b) Volt meter 100 x 100mm range 0 to 500 volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100 x 100mm range 0 to 100 volt 2 no. (AE/KAPPA/L&T) (d) CT 100/3 Nos. (AE/KAPPA/L&T) (e) VSS&ASS 1no. & 2 Nos of approved make (f) SPP 2 no. of approved make (g) Motor starter, star delta 2no. for 1100 LPM x 12 M Head Motor (L&T Siemens, AAB) (h) Capacitor of suitable capacity = 2 Nos. (i) Indicating Lamp = one set. (j) Change over switch 63 Amp = 1 No.

C) For Clear water Pump set for 2800 LPM x 40 Mtr. head = 2 Nos. (a) Main switch 100 Amp. 2 no. (L&T Siemens, ABB) (b) Volt meter 100 x 100mm range 0 to 500 volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100 x 100mm range 0 to 100 volt 2 no. (AE/KAPPA/L&T) (d) CT 100/3 Nos. (AE/KAPPA/L&T) (e) VSS&ASS 1no. & 2 Nos of approved make (f) SPP 2 no. of approved make (g) Motor starter, star delta 2no. for 2800 LPM x 40 M Head Motor (L&T Siemens, AAB) (h) Capacitor of suitable capacity = 2 Nos. (i) Indicating Lamp = one set. (j) Change over switch 100 Amp = 1 No.

Supply, erection, testing of ISI marked copper wire for 6 No. Motors with under ground system in PVC & flexible pipes copper wire complete in all respects with accessories like thimble etc. Complete in respects. i) 6 sq mm 3 core

ii) 25 sq mm 3 core

Supply, erection, testing of ISI marked copper wire for 4 Nos panel boards from main switch to panel and wiring of panel with size 35 sq. mm (copper wire) ISI marked complete in all respects with accessories like thimble etc. Complete in respects.

Operation and Maintenance for WTP and Raw arrangements complete scope of work ( Disinfection material supplied by the PHED) as per schedule-IV for a period of 5 year (12 months) during defect liability period & 3 months trial run period. (will be charged to the A/Mtc. Estimate) complete in all respect. Operation and maintenance during defect liability period ( Operation only) after 3 months trial run period

For 1st year Operation and maintenance after defect liability period

For 2nd year Operation and maintenance

For 3rd year Operation and maintenance

For 4th year Operation and maintenance

For 5th year Operation and maintenance

Bidder Name

Amount

ROHTASH KUMAR CONTRACTOR(GSTN-NA)

Umesh Kumar Contractor(GSTN-NA)

Umesh Kumar Contractor

ROHTASH KUMAR CONTRACTOR