REPAIRS / REPLACEMENT TO VARIOUS B/R ITEMS IN TOILETS AND BATHROOMS OF VARIOUS OTM AND MD ACCN ALONGWITH OTHER CONNECTED MISC ITEM IN AOR OF AGE B/R NRC UNDER GE NASIK ROAD.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete concrete(un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate)as in sub base to flooring all as directed by EIC.

M&L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6.

M&L for Non Skid ceramic tiles 7 to 8 mm thick for coloured tiles (square rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm , in floors etc, set and ointed in neat cement slurry and painted in coloured cement to match.

M&L for rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces as a backing coats for fixing tiles.

M&L for glazed ceramic tiles coloured in vertical surface 300x600/300x450x6mm to 7mm thick set and joint in neat cement slurry and pointed in colour cement to match (coloured tiles).

M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Note: screed bed layer, cement motar measured seperately

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

M&L for rendering 15 mm thick cement plaster other than fair faces of brick work or concrete surfaces in CM 1:6 rendering is to be finished even and smooth without using extra cement adding water proofing compound 3% by weight of cement (water proofing compound shall be measured and paid separately)

M&L for rendering 15 mm thick (1: 6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparing plastered surfaces and applying two coats of oil bound distemper over one coat of primer including preparatory work with including and applying 3mm thick wall care putty to distempering on surfaces of walls complete all as specified and directed by EIC.

S&F in repairs plastic seat cover coloured closed pattern with flat bottom and cover with mild steel chromium plated or alluminium hinging device.

S&F in repairs homemade single bowl Stainless steel kitchen sink 1.0 mm thick sheet for kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and conecting union to pipe, bowl size 600mmx450mmx250mm all as specified and directed

S&F in repairs PVC valveless, syphonic action type 10 ltr capacity flushing cistern, lowlevel, white or coloured, with inlet, ball valve,float and handle including brackets.

S&F in repairs Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs chromium Plated cast copper alloy pillar tap with capston heads fixed to iron pipes 15mm dia..

S&F in repairs bib tap 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&Fin repairs brass chromium plated tublar towel rail 'D' shape 20mm dia 600mm long.

S&F in repairs Angle cock 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&F in repair for chromium plated fancy shower rose with or without swivel joints of 65mm size

S&F PTMT grating of size up to 100mm (Minimum weight 25gms)

S&F in repairs PVC connection 15mm size with brass nut of 450mm long size

S&F in repair stop valve , chromium plated fancy typewith long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe of bore dia 15 mm or for union.

S&F in repair hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP)

Taking down PVC chowkat or frames with PVC shutters (without taking off shutters from the frame not exc. 1.5 Sqm each.

Providing & Fixing "RAJSHRI" Brand factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 63mm x 51 mm ( Moulded ) Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min.990 N ), Minimum Compressive Strength of 58 N/mm2 , Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and lenght, all as per specifications drawings as directed by the Engineer-In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company ( Hold Fast or Dash Fasteners shall be paid separately ) - For WC/Bathroom/ Toilet etc.

Providing “RAJSHRI” Brand Factory Made 25mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors.

S&F stainless steel barrel tower bolt 150 mm long

S&F stainless steel 150 mm handels

Dismantlling of stone slabs & tiles of any decsription or thickness in floors, aprons etc laid, bedded & pointed in any mortar.

S&F hand cut cudappa stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: Screed bed layer measured seperately complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20mm thick.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

S & F in repair for vitreous china wash down WC Pan Pedestal pattern type including fixing.

S&F in repairs vitreous china counter type wash basin Flat Bar 550x400mm excluding taps, chain and plug and porceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in CM 1:2 in wall completed all as specified and directed.

Taking up or down 15 mm dia tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed.

All as per Item No.40.00 above but 20 mm dia

Re-fixing only 15 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

All as per Item No.42.00 above but 20 mm dia

S&F for 15 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

All as per Item No.44.00 above but 20 mm dia

S&F 75 mm dia of PVC(SWR) pipes single socketed,in any length with rubber ring joints fixed to walls

All as per Item No.46.00 above but 110 mm dia

S&F of 75 mm dia PVC(SWR) bends of any radius

All as per Item No.48.00 above but 110 mm dia

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

M&L for stainless steel wire netting cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with stainless steel wire staples complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each.

S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,Glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge

S&F anodised powder coated aluminium Window/ventilators shutters, sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws, suitable handles and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

S&F figured glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane as per instructions of manufacturers complete all as specifed and directed

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of nitoproof 100 & nitopro 120 on plastered surface.Rendering again 10mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600mm long 20mm dia spout light grade & 1:3:6 C2 filling ,floor area of wc upto 1.5Sqm etc complete all as specified and directed.

M&L for Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

Dismantling water tanks exc 500 & n exc 1000 ltr capacity and removing from site.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layer 1000 litre capacity, hoisted and fixed in position all as specified.

S&F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms).

S&F Gun-metal, globe or gate valves, 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs Vitreous china bowl urinal flat back ,size of 465x355x265 white (minimum),with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe)

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directd

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 38,445.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Srujan Associates (BID ID -3061511)

Abhiraj Enterprises (BID ID -3062596)

MAHIMA CONSTRUCTION (BID ID -3061683)

M/S SAMEER SUBHASH PATANI (BID ID -3062341)

M/S K. K. Construction (BID ID -3062124)

SVT ENGINEERS AND CONTRACTOR. (BID ID -3061018)

sunway associates (BID ID -3062434)

Bidder Name

MAHIMA CONSTRUCTION

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

sunway associates

Srujan Associates

Abhiraj Enterprises

VISHAL CONSTRUCTIONS