Renovation of Sun City HUDA Dispensary in Sector-54 in Gurugram District. (RECALL)

Amount

Fixing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in all colours and shades, laid on20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with greycement slurry @ 3.3 kg/ sqm including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600x600 mm(HSR 10.63.2) (Labour Rate)

Fixing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in all colours and shades, laid on20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with greycement slurry @ 3.3 kg/ sqm including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600x600 mm(HSR 10.63.3) (Labour Rate)

Fixing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming toIS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1 :4 (1Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc.,complete.(HSR 10.59) (Labour Rate)

Fixing and fixing 1st quality ceramic glazed wall tiles conforming to IS: sqm 235 403 63815622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados, over12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) andjointing with grey cement slurry@ 3.3kg per sqm, including pointing in whitecement mixed with pigment of matching shade complete.(HSR 10.62) (Labour Rate)

Providing and fixing ISi marked flush door shutters conforming to IS : 2202(Part I) non-decorative type, core of block board construction with frame of1st class hard wood and well matched commercial 3 ply veneering withvertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISi marked Stainless Steel butt hinges with sqmnecessary screws(HSR 12.37.2)

Supply & fixing Windows frames (Chowkhats) including mullions consistingframe fabricated from sheet roll formed out of 1.2mm thick galvanized sheetas per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm & Powdercoated with pure Polyester powder up to 50 microns (as per approvedcolour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCAelectroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffnerplate 200mm long, receiver for aldrop, weld less corner assembly withbrackets & screws, M.S tie rod 50mm x 25mm to be fixed at bottom finishedwith powder coated total thickness of coating 0.6mm of approved shade,fixed in position including the cost of cement concrete for 1 :2:4 for fixing lugscomplete in all respects as per drawing, design, specification & entiresatisfaction of Engineer-in-charge.Door Frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter(HSR 13.21.1)

Door Frame of size 125mm x 60mm with 37mm wide double metrerebate for 35mm door shutter(HSR 13.21.2)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge ofaverage width of aperture 1.4 mm in both directions with wire of dia 0.63 mm,for doors, windows and clerestory windows with hinges and necessaryscrews: 30 mm thick shutters Kiln seasoned and chemically treated Hollock wood(HSR 12.19.2.1.2)

Fixing white vitreous chinaware pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous chinawareflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquitoproof coupling of approved municipal design complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISi marked white solid plastic seat and lid(HSR 22.24.1) (Labour Rate)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/ccutting and making good the walls etc. 15 mm dia nominal bore(HSR 22.88.1)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore(HSR 22.88.2)

Fixing white vitreous chinaware flat back half stall urinal of size580x380x350 mm with white PVC flushing cistern, with fittings, standard sizeC.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass)with waste fitting as per IS : 2556, C.I. trap with outlet grating and othercouplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern(HSR 22.26.1) (Labour Rate)

Fixing in position vitreous chinaware white lavatory suites ofapproved make (to the approval of Engineer-in-charge) including Rack BoltScrew Pair 115mm long without CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm(HSR 22.221.2) (Labour Rate)

Fixing 600x450 mm bevelled edge mirror of superior glassapproved quality) complete with 6 mm thick hard board ground fixed towooden cleats with C.P. brass screws and washers complete.(HSR 22.209) (Labour Rate)

Fixing brass bib cock of approved quality: 15 mm nominal bore(HSR 22.96.1) (Labour Rate)

Fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make asapproved by Engineer - in - charge.(HSR 22.38) (Labour Rate)

Providing and fixing rectangular high density polyethylene water storage loft litre tank with cover, conforming to ISi : 12701, colour of opaque white or asapproved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures fortank shall be paid separately.(HSR 22.182)

Renewing glass panes and refixing existing wooden fillets:Float glass panes of nominal thickness 4 mm (weight not less than 1O kg/sqm)(HSR 30.56.1)

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISi marked M.S. pressed butthinges bright finished of required size with necessary screws, excludingpanelling which will be paid for separately, all complete as per direction ofEngineer-in-charge. (Note:- Butt hinges and necessary screws shall be paidseparately Kiln seasoned and chemically treated Hollock wood 30 mm thick shutters(HSR 12.7.2.2)

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,pipes.(i) Single socketed 110 mm diameter(HSR 9.57.2)

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ring conformingto IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 150 mm diameter(HSR 9.57.3)

Providing and fixing on wall face Unplasticised - PVC moulded fittings/accessories for Unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion. Single push fit Coupler 110 mm(HSR 9.58.2.2)

150 mm(HSR 9.58.2.3)

Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1 :4 (1 cement : 4 coarsesand) C.I. cover with frame (light duty) 455x61 O mm internal dimensions, totalweight of cover with frame to be not less than 38 kg (weight of cover 23 kgand weight of frame 15 kg), R.C.C. top slab with 1: 1.5:3 mix (1 cement : 1.5coarse sand : 3 graded stone aggregate 20 mm nominal size), foundationconcrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1 : 3 ( 1 cement : 3 coarsesand), finished smooth with a floating coat of neat cement on walls and bedconcrete etc.complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay non-modular bricks of class designation (HSR 22.179.1.1)

Brick work with common burnt clay non-modular bricks of classdesignation 7 .5 insuperstructure above plinth level up to floor IVlevel in all shapes and sizes in : Cement mortar Cement mortar 1:6 (1 cement: 6 coarse sand)(HSR 7.22.2)

12 mm cement plaster of mix :1 :6 (1 cement: 6 fine sand)(HSR 11.5.4)

15 mm cement plaster on the rough side of single or half brick wall of mix :1 :6 (1 cement: 6 fine sand)(HSR 11.6.2)

Applying priming coats with primer of approved brand and manufacture,having low voe (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having voe content less than 50 grams/litre(HSR 11.69.2) (Labour Rate)

Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade:) New work (two or more coats) over and including water thinnable priming coat with cement primer(HSR 11.64.1) ( Labour Rate)

Applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surfacesmooth with sand paper to get en even and smooth finish including cost andcarriage of all material , labour charges, scaffolding, sundries etc. complete(HSR 11.58) (Labour Rate)

Wall painting on a cement plaster surface with acrylic emulsion paint ofapproved brand and manufacture to give an even shade : Two or more coats on new work(HSR 11.71.1) (Labour Rate)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (HSR: 30.21)

Demolishing mud phaska in terracing and disposal of material within 50 metres lead.(HSR 5.11)

Regarding terracing of mud phaska covered with tiles or brick, in sqmcement mortar by dismantling tiles or bricks, removing mudplaster, preparing the surface of mud phaska to proper slope,relaying mud plaster gobri leaping and tiles or bricks, grouted incement mortar 1 :3 (1 cement : 3 fine sand), including replacingunserviceable tiles or bricks with new ones and disposal ofunserviceable material to the dumping ground (the cost of thenew tiles or brick excluded), all complete as per direction ofEngineer-in-Charge.(HSR 30.9)

Providing gola 75x75 mm in cement concrete 1: 2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cementmortar 1 :3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase(HSR 9.17.1)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.(HSR 11.77) (Labour Rate)

Fixing aluminium sliding door bolts, ISi marked anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm(HSR 12.98.1) (Labour Rate)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / panelling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners tobe paid for separately) :For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)(HSR 12.157.1.2)

Providing and fixing 12 mm thick prelaminated particle board flat pressedthree layer or graded wood particle board conforming to IS: 12823 Grade IType II, in panelling fixed in aluminium doors, windows shutters and partitionframes with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sqm sides(HSR 12.158.2)

Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete as perthe architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)(HSR 12.159.2)

Providing and fixing double action hydraulic floor spring of approved brandand manufacture conforming to IS : 6315, having brand logo embossed onthe body / plate with double spring mechanism and door weight up to 125 kg,for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and coverplates with brass pivot and single piece M.S. sheet outer box with slide plateetc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness(HSR 12.160.1)

Providing Aluminium Jali of thickness 7mm thick with openings - 75mm X sqm 75mm of including anodizing and fixing in frame with cost of screws etc.(HSR 12.107)

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete.Fixed to steel windows by welding(HSR 12.50.1)

Providing and fixing 1.2 metres high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres centre to centre founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and comer post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, tum buckles etc complete as per clause 807 G.I Barbed Wire Fencing 1.2 Metre High(HSR 34.29.1)

Providing and laying in position cement concrete of specifiedgrade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)(HSR 6.1.2)

Recovery Items:-Bidder have to quote rate for recovery items at least or more than reserve price. The rate quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency.T Note:- The reserve rate/amount is minimum amount to be used as base for quoted purchase rate by the agency. No rates/amount below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.-- Tiles @4.50 per Tiles Note:- All quantities of the above materials have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purhcase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purpose in case the agency qoutes lesser than reserve price. In case of any difference in the Unit & Nomenclature of any of the HSR Items of Civil, PH depiced in the DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. The agency to whom the workk has been allotted have to produce original bill/ voucher for all quantity in tokan of proof of purchase of material.