Repair and Renovation of Phase II building at NFDC at NFDC FD Complex, 24, Dr Gopal Rao Deshmukh Marg, Mumbai.

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

1 Enabling Work

2 14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven Sqm 1796.30 338.25 6,07,596.78

story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase

system in the scaffolding for working platform etc. and maintaining it in a serviceable condition

for the required duration as approved and removing it there after. The scaffolding system shall

be stiffened with bracings, runners, connection with the building etc wherever required for

inspection of work at required locations with essential safety features for the workmen etc.

complete as per directions and approval of Engineer-in-charge. The elevational area of the

scaffolding shall be measured for payment purpose. The payment will be made once irrespective

of duration of scaffolding. (DSR 2023, ITEM NO. 14.72, PG. NO. 233)

3 26.36 Providing, erecting, maintaining and removing temporary protective screens made out of Sqm 1796.30 54.25 97,449.00

specified fabric with all necessary fixing arrangement to ensure that it remains in position for

the work duration as required by the Engineer-in-charge. (a) Wooven PVC cloth (DSR 2023,

ITEM NO. 26.36, PG. NO. 363)

4 NS Providing and erecting external safety net of opening 75x75 in addition to vertical fisher net Sqm 898.15 129.00 1,15,861.03

arrester on the first floor or vertically throughout to prevent debris falling while execution of

work, to hold / absorb the debris stone impact, and during the entire period of work. The work

should be carried out with all the safety measures like helmet, safety belt and adequate labour

insurance under the supervision of qualified supervisor and removing after completion after

complete work. etc. complete. (As directed by Engineer in Charge)

5 NS Providing and fixing in vertical position telescopic M.S.prop under deflected Nos. 671.00 1,854.00 12,44,034.00

beam/lintel/slab/chajjas by using teak wood battens of size 1000 x 80 x 80 for packing between

prop plate and the beam/lintel/slab/chajjas bottom surface as per the directions of engineer-in-

charge (BMC 2023, ITEM NO. R3-CS-RM-66, PG. NO. 219)

6 NS Providing and fixing 6mm thick commercial plywood with jungle wood frame work of 50x35mm Sqm 85.80 1,048.00 89,918.40

size at 60cm on both ways for closing the window portion/openings for protection from falling

debris, dustetc. including cutting, fixing with nails and removing after the same after completion

of the work. (To be used after approval of Superintending Engineer) (SSR 2022-23, ITEM NO.

7 Dismantling & Demolishing Work

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

8 26.28 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual

Chisel and/ or by standard power driven percussion type or of approved make including

tapering of all edges, making square shoulders of cavities including cleaning the exposed

concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and

lifts all complete as per direction of Engineer-In-Charge (DSR 2023, ITEM NO. 26.28, PG. NO.

9 a) 50 mm average thickness Sqm 335.42 256.35 85,983.78

10 b) 25 mm average thickness Sqm 335.42 126.75 42,513.92

11 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster Sqm 670.83 54.65 36,660.92

including disposal of rubbish to the dumping ground within 50 metres lead. (DSR 2023, ITEM

12 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and Cum 10.00 3,551.25 35,512.50

disposal of unserviceable material within 50 metres lead as per direction of Engineer - in-

charge. (DSR 2023, ITEM NO. 15.3, PG. NO. 239)

13 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material

within 50 metres lead as per direction of Engineer - in - charge. (DSR 2023, ITEM NO. 15.2 PG.

14 a) Nominal concrete 1:3:6 or richer mix (including equivalent Cum 10.00 2,434.25 24,342.50

15 b) Nominal concrete 1:4:8 or leaner mix (including equivalent Cum 10.00 1,503.60 15,036.00

16 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead. (DSR 2023, ITEM NO. 15.23, PG. NO. 241)

17 a) For thickness of tiles 10 mm to 25 mm Sqm 3041.85 73.40 2,23,271.79

18 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling Sqm 3041.85 56.35 1,71,408.25

including disposal of unserviceable material and stacking of serviceable material with in 50

meters lead as directed by Engineer-in-charge. (DSR 2023, ITEM NO. 15.57, PG. NO. 243)

19 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 2023,

ITEM NO. 15.12, PG. NO. 240)

20 a) Of area 3 sq.m. and below Nos. 20.00 367.20 7,344.00

21 b) Of area beyond 3 sq. metres Nos. 20.00 502.75 10,055.00

22 15.27 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. (DSR Cum. 598.66 914.30 5,47,354.84

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

23 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge. (DSR 2023, ITEM NO. 15.7, PG. NO. 239)

24 a) In cement mortar Cum 1.50 2,060.20 3,090.30

25 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset Kg. 200.00 5.65 1,130.00

plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50

metres lead. (DSR 2023, ITEM NO. 15.18, PG. NO. 240)

26 Structural Repair Work

27 26.29 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel

surface by using alkaline chemical rust remover of approved make with paint brush and

removing loose particles after 24 hours of its application with wire brush and thoroughly

washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

(DSR 2023, ITEM NO. 26.29, PG.NO. 361)

28 a) Bars upto 12 mm diameter Metre 1000.00 8.25 8,250.00

29 b) Bars above 12 mm diameter Metre 1000.00 16.45 16,450.00

30 NS Anti Corrosive coating to exposed reinforcement: Providing & applying Two coats of Anti MT 2.47 6,030.40 14,895.09

Corrosive protective coating (CBRI / CSIR technology) for reinforcement bars by brush. Sprinkle

dry sand when second coat is tacky so as to get rough surface. (BMC 2023, ITEM NO. R3-CS-RF-

31 NS Application of Corrosion Inhibitor: Providing & applying One coat of Concrete Penetrating Sqm 670.83 164.00 1,10,016.31

Corrosion Inhibitor (Surface applied) which works on Bipolar Inhibition Mechanism on entire

concrete surface to be repaired by using brush or spray at 250 ml per Sq.Mt./Coat or as per

manufacturer’s specification and prior to application of first coat of anti corrosive coating to

reinforcement. (BMC 2023, ITEM NO. R3-CS-RF-1 , PG.NO. 245)

32 26.35 Providing and injecting approved grout in proportion recommended by the manufacturer into

cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure

including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge.

(The payment shall be made on the basis of actual weight of approved grout injected.) (DSR

2023, ITEM NO. 26.35, PG.NO. 363)

33 Epoxy injection grout in concrete/RCC work of approved

34 NS Bond Coat: Providing & applying One coat of structural grade epoxy bond coat by brush Sqm 670.83 520.00 3,48,832.20

conforming to ASTM-C-88287 to the prepared concrete surface to be repaired / strengthened.

This is applied prior to the application of polymer repair mortar / epoxy mortar /

Microconcrete to have monolithic action between old conc (BMC 2023, ITEM NO. R3-CS-RF-5 ,

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

35 5.9 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 2023,

ITEM NO. 5.9, PG. NO. 115)

36 a) Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm Sqm 152.09 1,028.40 1,56,411.93

37 b) Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm Sqm 109.26 841.95 91,994.89

38 c) Columns, Pillars, Piers, Abutments, Posts and Struts) Sqm 148.12 961.30 1,42,385.83

39 NS Making up of distressed / loose / cracked / porous carbonated, loose part of concrete with Kg 28845.74 90.00 25,96,116.55

Fiberous Micro Concrete by Micron 1000 of Associated Chemicals or equivalent and repairing

the damaged surface of concrete, fixing the form work / shuttering across the profile of

damaged structural element, Micro concrete should be mixed homogeneously Pour the free flow

ready mix micro concrete mix with 5 L to 7 L of water in the form work. The work should be

carried out with all the safety measures like helmet, safety belt and adequate labour insurance

under the supervision of qualified supervisor etc…complete

(As directed by Engineer in Charge)

40 NS Making up of lost section of concrete with thixotropic repair ready mix mortar. It is one Kg 22137.43 82.00 18,15,269.09

component thixotropic dual shrinkage compensated fiber reinforcement formulation, for

structural Beam / slab members of / Cema Crete, Associated Chemicals or equivalent It is done

by hand packing as per manufacturers specification, applied by means of hand gloves by expert

applicator. The rehabilitated surface should be free from air gaps, voids It should be in line with

existing surface, including curing, cleaning the area etc. complete. The work should be carried

out with all the safety measures like helmet, safety belt and adequate labour insurance, under

the supervision of qualified supervisor etc...complete

(As directed by Engineer in Charge)

41 5.22/5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

A and binding all complete upto plinth level. (DSR 2023, ITEM NO. 5.22/5.22A, PG. NO. 118)

42 a) Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 1609.99 107.85 1,73,637.93

43 NS Shear Connectors: Make 10/12 mm dia holes using heavy duty electrically operated hammer Nos. 269.00 561.00 1,50,909.00

drills in the concrete of RCC members to a depth of about 75 mm at 500 mm c/c or at suitable

grid in zig-zag fashion, clean the holes using air jet and fix pre-fabricated 100 x 50 mm L-shape 8

mm dia rebar using Anti Corrosive protective coating so that 75 mm out of 100 mm is inserted

inside the concrete and 25 mm remain outside along with 50 mm bend. The shear connectors

are used to tie the additional reinforcement bars. (BMC 2023, ITEM NO. R2-CS-RF-3, PG. NO.

44 NS Drilling and fixing 8mm,10mm,12mm,16mm, 20mm, 25mm, re-bars with 'Fischer/Hilti' system

and chemical, etc. the cost of steel for re-bars is included.

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

51 Waterproofing Treatment

52 NS Saturate the prepared surface with clean water for at least one to two hours before applying the Sqm 598.66 996.00 5,96,265.36

bond slurry. Apply RIPSTAR 137 as supplied on to the prepared damp surface using a brush or

medium nap roller. Wet down absorbent surfaces, such as concrete, brick, stone, etc., ensuring

that they are saturated but free of surface water. ii)Apply the one coat SMARTSIL 104 with

brush, roller or spray. If applied by brush or roller the coat should be applied in one direction

only. Allow it to dry completely for 2-3 hours. Apply the second coat of SMARTSIL 104 on the

dried first coat. If applied by brush or roller, the second coat should be applied in the direction

perpendicular to the first coat. Allow it to dry for 3-4 hours. iii) Applying 50gsm geo textile

membren on above coat. iv) Apply SMARTSIL 450 in one coat using airless spray to achieve a

WFT of 650μ or in two coats each of 325μ WFT using roller or brush, with the second coat

applied 2 – 4 hrs after the first and at right angle to it etc complete.

53 NS Providing and laying integral cement based water proofing treatment including preparation of Sqm 598.66 1,704.00 10,20,116.64

surface as required for treatment of roofs, balconies, terraces etc consisting of following

operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the

RCC slab including adjoining walls upto 300 mm height including cleaning the surface before

treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm

size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer

of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating

similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and

slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/

sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved

by Engineer-in-charge.

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4

coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster

and finally finishing the surface with trowel with neat cement slurry and making pattern of

300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final test. All above operations to be done

in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120

mm and minimum,thickness at khurra (BMC 2022-23, ITEM NO. R3-CS-WP-5, PG. NO. 52)

54 Allied Civil & Finishing Works

55 Plain Cement Concrete

56 4.1.5 Providing and laying in position cement concrete of specified gradeexcluding the cost of

centering and shuttering - All work up to plinth level : (DSR 2023, ITEM NO. 4.1.5, PG. NO.

57 a) 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone Cum 20.00 7,294.70 1,45,894.00

aggregate 20 mm nominal size derived from natural sources)

58 4.1.2 Providing and laying in position cement concrete of specified gradeexcluding the cost of

centering and shuttering - All work up to plinth level : (DSR 2023, ITEM NO. 4.1.2, PG. NO.

59 a) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone Cum 20.00 8,430.85 1,68,617.00

aggregate 20 mm nominal size derived from natural sources)

60 Reinforced Cement Concrete

61 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of concrete to site

of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is more than 110% of the

specified minimum cement content, the contractor shall have discretion to either re-design the

mix or bear the cost of extra cement. (DSR 2023, ITEM NO. 5.33, PG. NO. 120)

62 All works upto plinth level

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

63 a) Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 10.00 9,504.75 95,047.50

64 b) Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 10.00 9,655.70 96,557.00

65 All works above plinth level upto floor V level

66 a) Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 2.00 9,860.40 19,720.80

67 b) Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 2.00 10,011.35 20,022.70

68 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

(DSR 2023, ITEM NO. 5.1, PG. NO. 113)

69 a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone Cum 2.00 9,045.75 18,091.50

aggregate 20 mm nominal size derived from natural sources)

70 Steel Reinforcement

71 5.22/5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

A and binding all complete upto plinth level. (DSR 2023, ITEM NO. 5.22/5.22A, PG. NO. 118)

72 a) Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 750.00 107.85 80,887.50

73 Masonry Work

74 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:: (DSR 2023, ITEM NO. 6.1, PG. NO. 127)

75 a) cement mortar 1:4 (1 cement : 4 coarse sand) Cum 4.00 7,370.65 29,482.60

76 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 2023, ITEM

77 a) cement mortar 1:4 (1 cement : 4 coarse sand) Cum 4.00 9,344.35 37,377.40

78 6.12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in foundations and plinth in : (DSR 2023, ITEM NO. 6.12, PG. NO. 127/128)

79 a) cement mortar 1:4 (1 cement : 4 coarse sand) Sqm 10.00 905.05 9,050.50

80 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in superstructure above plinth level up to floor V level. (DSR 2023, ITEM NO. 6.13, PG. NO.

81 a) Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 10.00 1,123.80 11,238.00

82 Internal & External Plaster

83 13.16 6 mm cement plaster of mix : (DSR 2023, ITEM NO. 13.16, PG. NO. 218)

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

85 13.1 12 mm cement plaster of mix : (DSR 2023, ITEM NO. 13.1, PG. NO. 217)

87 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 Sqm 1796.30 518.55 9,31,468.77

coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

(DSR 2023, ITEM NO. 13.11, PG. NO. 217)

88 NS Providing sand faced plaster externally in cement mortar using approved screened sand, in all Sqm 1796.30 639.00 11,47,832.51

positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing

compound at 1Kilogram per cement bag curing the same for not less than 2days and keeping the

surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement

mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding

etc.complete. (SSR 2022-23, ITEM NO. 32.11, PG. NO. 209)

90 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, Sqm 7023.43 25.15 1,76,639.18

sand papering and preparing the surface smooth including necessary repairs to scratches etc.

complete. (DSR 2023, ITEM NO. 13.91, PG. NO. 224)

91 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand Sqm 7023.43 156.05 10,96,005.71

and manufacturer, over the plastered wall surface to prepare the surface even and smooth

complete. (DSR 2023, ITEM NO. 13.80, PG. NO. 123)

92 13.85 Applying priming coats with primer of approved brand and manufacture,

having low VOC (Volatile Organic Compound ) content. (DSR 2023, ITEM NO. 13.85, PG. NO.

93 a) With water thinnable cement primer on wall surface having VOC content less than 50 Sqm 7023.43 73.95 5,19,382.39

94 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour. (DSR

96 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required

shade: (DSR 2023, ITEM NO. 13.47, PG. NO. 220)

97 a) New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of Sqm 1796.30 171.10 3,07,346.07

exterior primer applied @ 0.90 litre/10 sqm)

98 13.50 Applying priming coat: (DSR 2023, ITEM NO. 13.50, PG. NO. 220/221)

99 a) With ready mixed aluminium primer of approved brand and manufacture on resinous wood and Sqm 500.00 74.65 37,325.00

BILL OF QUANTITIES (CIVIL WORKS)

S.No. DSR2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

100 b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel Sqm 500.00 67.40 33,700.00

galvanised iron/ steel works

101 13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to

give an even shade : (DSR 2023, ITEM NO. 13.62, PG. NO. 222)

102 a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of Sqm 1000.00 226.25 2,26,250.00

approved brand and manufacture

103 Miscellaneous

104 NS Cleaning, Lowering down, Disposal of all debris/ malba obtained from dismantling/ Cum 248.29 1,163.00 2,88,761.27

demolishing/ breaking and removing of plaster/ brick masonry/ concrete etc. from all floors by

any means without causing dust nuisance and damage to structure, stacking the same as and

where directed including cleaning the site complete. The cost is including disposal of debris/

malba/ similar unserviceable or waste material by mechanical transport including loading,

transporting, unloading to approved municipal dumping ground for all leads & lifts, complete.

NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (INTERIOR WORKS)

Rate (Rs.) Amount (Rs.)

S.No. DSR 2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

1 1046 Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 Sqm 1528.69 1,636.00 25,00,936.84

millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla)

of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical

filling joints curing and cleaning etc .complete. (DSR 2023, ITEM NO. 1046, PG.NO.199)

2 1051 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622- Sqm 69.80 1,200.00 83,760.00

2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement

float, filling joint with cement slurry cleaning curing etc. complete.(DSR 2023, ITEM NO. 1051, PG.NO.199)

3 1012 Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting Sqm 287.10 1,392.00 3,99,643.20

in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including

joint filling with white/ colour cement slurry cleaning curing etc. complete.(DSR 2023, ITEM NO. 1012, PG.NO.194)

4 1749 Providing and constructing non load bearing wall with 100 mm Grinded Horizontally perforated clay hollow blocks Sqm 55.20 1,325.00 73,140.00

with compressive strength not less than 35Kilogram/Sqcm, U value of 1.7 W/m2K, Water Absorption of 15%

tolerance on Grinded brick height is +/- 1.00 mm, masonry to be done using Dry Flx. Systeam with 20 mm thick S

shape application (Application method need to be followed as per Wienerberger methodology) blocks of size

400mm x 100 mm x 200 mm (12.5 brick per One Square Metre.) including cost of material, labour charges,

scaffolding, curing at all height, RCC. stiffener band necessary at every 1.0 meter height of the wall, complete as per

specification & directions of Engineer in charge. Cost shall be inclusive of end bricks to be used at window and door

jambs for fixing hold fast. anchors etc.,,plastering is to be done as per requirement ,and is to be considered seperatly

with prior approval of concerned Superitending Engineer. (DSR 2023, ITEM NO. 1749, PG.NO.312)

5 1837 Providing & Fixing in position, Partition made from 12mm thick Gypsum from both sides on 50 x 50 mm Sal-wood Sqm 614.16 2,524.00 15,50,139.84

frame of 600 x 600 c to c, having of 800 gsm synthetic wool 50 mm thick in between, including cost of required Cut-

Outs & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all

materials labour,finishing etc complete. (DSR 2023, ITEM NO. 1837, PG.NO.329)

6 NS Supply and instalaation of Demountable Modular Aluminium Frame Glass Partition, Single glazed system comprising Sqm 52.50 8,250.00 4,33,125.00

of 10mm Toughnend Glass and Aluminium profile Sections of size75MM x 30MM for fixing at Floor level and at false

ceiling level with appropriate brackets and expansion bolts of standardised S.S. Finish. All Hardwares shall be made

of standardised S.S. finish etc. complete. The Profile features and double sided adhesive tape guarantees perfect

structural union and sound insulation. Finishes exposed aluminium sections are anodized aluminium finish with

6463 T6 Grade. The Quantity for this item will be the glass panel of height 2100MM only. (MCGM 2023, ITEM

NO.R3-CS-FUR-33 , PG.NO.261)

7 1885 Solid Core Flush door Single leaf: Providing and fixing factory made solid core flush door in single leaf 35 mm thick, Sqm 28.35 2,750.00 77,962.50

decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved

face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed,

all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with

french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use)

Commercial Hard Wood shutter (DSR 2023, ITEM NO. 1885, PG.NO.343)

8 NS Providing and fixing fully glazed 12mm thick entrance Toughened glass door comprising of one leaf glass shutter of Nos 2.00 15,459.00 30,918.00

size 900 mm width and height 2100mm fully glazed with necessary handles, etching, pivot arrangements complete

incl all hardware patch fitting, floor spring, locks etc. as per approved drawing.

BILL OF QUANTITIES (INTERIOR WORKS)

Rate (Rs.) Amount (Rs.)

S.No. DSR 2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

9 NS Reception desk: Reception Counter in of size 2.50m(l)x0.9m(D)x1.0 m(h) in 19 & 12mm marine ply in laminated Nos 1.00 74,950.00 74,950.00

finish from exterior sides and 0.8m laminate to inside with 25x6mm btc beqding. It shall have 2 nos of cabinet, 2nos

of Drawer & keyboard drawers with ss drawer channel and 100mm handles and godrej drawer lock, french polishing

etc. complete as per picture & approved drawings with approved make etc

10 1846 Executive's Table @ 1800Lx900Dx750HT : Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END Nos 6.00 17,231.00 1,03,386.00

to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY

PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing (DSR 2023,

ITEM NO. 1846, PG.NO.330)

11 NS Credestal( Side runner) @ 1000Lx300Lx600HT : Providing & Fixing of LOW HEIGHT CREDESTAL Nos 6.00 21,873.00 1,31,238.00

@1000Lx300Lx600HT :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between

)as per drawing & picture with approved make etc

12 NS Executive's Table @ 1200Lx750Dx750HT : Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END Nos 17.00 21,539.00 3,66,163.00

to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY

PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing & picture with

approved make etc

13 NS Credestal( Side runner) @ 600Lx300Lx600HT : Providing & Fixing of LOW HEIGHT CREDESTAL Nos 17.00 21,873.00 3,71,841.00

@600Lx300Lx600HT :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between

)as per drawing & picture with approved make etc

14 NS Providing & Fixing Curviliner Workstation @ 900Lx75Dx750HT, Curvilinear Table Top @ 900Lx750D :- TOP to be Nos 196.00 19,709.00 38,62,964.00

made of 25 mm thick Prelaminated particle board with PVC edge band, GABLE END to be made of 25 mm thick

Prelaminated particle board with PVC edge band, KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder

Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT

having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal

with powder coat finish, facia in 18 mm prelaminated particle board & picture with approved make etc

15 NS Providing and fixing Storage cabinet in all areas in 19mm & 12mm marine ply including sealing the ply edges by btc Sqm 36.16 47,381.00 17,13,391.72

stips of required size. French Polishing etc. complete. Fittings and fixtures, 3 nos. of 100mmx25mmx25mm SS hinges,

one 300mm ss tower bolt & magnetic cather to each shutter. It shall have have ss 25mm hanger rod and Cupoard

lock of godrej make, all hardwares and required accessories as directed & drawings, picture with approved make etc

16 1865 Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift Nos 24.00 17,331.00 4,15,944.00

for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery (DSR 2023, ITEM NO.

17 1867 Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Nos 305.00 9,563.00 29,16,715.00

Standard 5-prong/Nylon Base with Leather Upholstery (DSR 2023, ITEM NO. 1867, PG.NO.334)

18 NS Conference Table @2400 x 900 x 750 mm Ht. : Providing & Fixing of Main Table @ 2400Lx900Dx750HT - made up of Nos 3.00 26,385.00 79,155.00

18+18mm Thick HDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding

of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC

Membrane finish and rest in Prelaminated HDF with batton structure. Gable ends should be hollow from inside for

the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated

HDF with PVC edge band Access Flap:- For Wire manager 1 Nos. complete as per drawing & picture with approved

BILL OF QUANTITIES (INTERIOR WORKS)

Rate (Rs.) Amount (Rs.)

S.No. DSR 2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

19 NS Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal Nos 14.00 52,920.00 - 7,40,880.00

frame work made of C.P. teak / equivalent wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and

cushion madewith foam of 150mm thick - minimum 32 density on seat covered with 14mm thick - minimum 18

density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and coveredwith foam of

100mm thick - 32densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam

of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with

wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc.complete. Three

seater (MCGM 2023, ITEM NO.R3-CS-FUR-17-c , PG.NO.257)

20 NS Providing and fixing Panelling in 50X 25 mm 1st class teak wood frame in 600mm X 600mm grid with 12 mm Sqm 165.51 15,266.00 25,26,675.66

plywood panels complete as directed & as per drawing etc

21 1844 Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Sqm 168.00 2,152.00 3,61,536.00

Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be

final by Engineer In-charge prior execution of work)( 2000 x 1500mm) (DSR 2023, ITEM NO. 1844, PG.NO.330)

22 NS Providing and supplying Artificial plant with cover medium size complete as directed etc Nos 55.00 12,938.00 7,11,590.00

23 NS Providing and supplying Artificial plant with cover Large size complete as directed etc Nos 55.00 22,425.00 12,33,375.00

24 NS Providing and fixing 85mm thick puff Acoustic Door consisting 1st class teak wood door frame section of size 100mm Sqm 15.12 9,868.00 1,49,204.16

x 50mm and middle section size is 125mm x 50mm. 9mm thick commercial ply to be fixed on both size at 1st class

teak wooden frame with 50mm thick resin bonded rockwool pad conforming to IS8193 of minimum 100kg density

to be fill in gap at wooden frame. For sound absorption 2mm thick sound damping layer (mass load vinyl) to be fix

on inside 6mm calcium silicate board to be fixed inside the door to reduce sound transportation for acoustic

insulation. 4mm thick teak veneer to be fixed as a skin on both sides finished. All edges of the panel door to be cover

with 85mm wide x 10mm thick 1st class teak wood battens - D type rubber gasket to be fixed teak wood batten for

stop noise leakage complete door as performance as a top quality sound proof acoustic door. The door to be fixed on

existing door frame with heavy duty SS hinges at size 150mm x 50mm x 4mm with ss screws. All hardware i.e. door

handles, door stopper and door closer etc have to be taken separately, not to be included in this item. complete as

directed as per drawing & picture with approved make etc

BILL OF QUANTITIES (INTERIOR WORKS)

Rate (Rs.) Amount (Rs.)

S.No. DSR 2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

25 NS METAL FALSE CEILING WITHOUT SUSPENSION SUPPORT FROM TRUE CEILING: Providing & fixing horizontal level Sqm 1500.00 6,511.00 - 97,66,500.00

suspended metal ceilings comprising of Metalworks F-H 600 Hook-on corridor system manufactured by Armstrong

Ceiling Solutions with Rectangular panels made of 0.7mm thick Galvanised Steel (GI) of 120gsm, post coated to

Global White colour, suitable for Interior applications and architectural finishes, double grid concealed system and

butt joint panels. The panel width shall be 300mm, length ranging from 1500mm to 2660mm. General

Specifications:Entire system to be designed for Interior applications, and concealed Grid, Butt joint panels. Panel

Specifications: Material: The F-H 600 rectangular Hook-on panels to be made of galvanized steel (GI) of minimum

120gsm hot dipped galvanization (both sides included) as per IS 277 (2003), zero or minimum spangled, in

minimum base material thickness of 0.7mm as per in IS:513 (1994). Dimensions: The panel Length varies between

1500mm to 2660mm, panel Width shall be 300mm. The dimensional tolerances for length shall be ±1.0m up to

1000mm L; ±1.5mm between 1001 to 2000mm L; ±2.0mm between 2001 to 3000mm L. The dimensional tolerances

for width shall be ±0.5m up to 300mm W. Dimensional Tolerances for panel Thickness / panel width / panel length -

to be measured in accordance with TAIM standards. Edge detail: the panels shall ha+A3ve Square Edge, with a

3mm(W) x 8mm(H) black foam gasket glued at the edges, typically on one long and one short side. All adjacent

panels shall touch each other forming a butt joint and concealed grid visuals. Upturns: The short side of the panel

shall have vertical upturns of minimum 30mm (H) and shall be bent appropriately bent as per the manufacturer’s

specifications for providing hook-on ends. The long side shall have inside horizontal bends of 5-15mm for rigidity

and vertical upturns of 40mm (for length ranging from 1251-2660mm).

Surface Finish: Plain: The panels shall be in plain unperforated finish (without any acoustical backing / felt). Colour

and finishes: The panel surface shall be electrostatically powder coated (post coat) on visible side after mechanical

production, using RoHS compliant powder, to achieve coating thickness ranging from 60-80µ and architectural

quality finish. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for

1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017, 250 hours of

condensation test (as per DIN 50017 or DIN EN ISO 6270-1 Norms), UV resistance of 500 hours and 50% gloss

retention (as per ASTM G 154 UVB-313 Norms). The powder coating shall have an adhesion of GT0 as per EN ISO

2409. The shade variation across batches shall be delta E (∆e) <1 measured using Excite/BYK Gardner instrument

and gloss level of 25±5% at 60˚ as per ASTM D523.The colour / shade to be Global White (Polyester for Interior) as

approved by the Architect or Engineer-in-charge.

Surface Protection: The visible panel surface shall be protected using a guard film made of LDPE of 50µ thickness,

having appropriate surface adhesion (or tackiness) corresponding to surface gloss level. Light reflectance: The panel

shall have a Light Reflectance of ≥ 63% in accordance to ASTM 1477-98. Flatness and Sag limit: Panels shall be

flattened by precision leveller to minimize sag to less than Length/400mm. The difference between the two diagonal

dimensions of the panel to be less than 1mm. The sag to be measured at the center in accordance with TAIM

standards. Access and Plenum space: The panels to be Fully Accessible, with system height of 98mm, and would

require a plenum height of a minimum 450mm clear space from bare ceiling / rigid structure for installation.

Packaging: The Panels shall be packed in wooden crates of appropriate dimensions based on panel sizes. The wooden

planks for rates shall have thickness of approx.15mm, width of around 4” and gap between two planks around 3”.

Crates to have layer separators of 1” x 2” dimensions to prohibit load transfer on bottom panels, and the crates lifting

to be 2way or 4way. The bottom of crates shall be completely closed, and the panels kept inside shall have cushioning

of corrugated sheets or other appropriate material.

BILL OF QUANTITIES (INTERIOR WORKS)

Rate (Rs.) Amount (Rs.)

S.No. DSR 2023 Description Unit Qty.

DSR 2023 NS DSR 2023 NS

26 1144 Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Sqm 7473.32 275.00 20,55,163.00

Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral

turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty

with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery

paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45%

or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or

65 to 70 % by roller. (With prior approval of EIC)(DSR 2023, ITEM NO. 1144, PG.NO.206)

27 NS Working Table @ 3000Lx900Dx750HT : Providing & Fixing of Table @ 3000Lx900Dx750HT - TOP & GABLE END to Nos 6.00 21,116.00 1,26,696.00

be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY

PANEL to be made of 18 mm thick Prelaminated HDF board with PVC edge band as per drawing & picture with

approved make complete

28 NS Providing and fixing of Raised platform of required size 4000L x1200Dx200H. Platform top shall be made of 25mm Nos 4.00 22,978.00 91,912.00

thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS

710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressedPVC edge

banding in matching colour. (RehauMake/or Equivalent) for better impact resistance in approved colour and shade

as per pre-approved sample etc. complete

29 NS DISCUSSION TABLE: Providing and fixing of Modular table of required size. Table topshall be made of 25mm thick Nos 15.00 17,719.00 2,65,785.00

Marine ply (IS 710 : 2010) , FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Commercial Plywood

(IS 303 : 1989) . All boards components like top, sides etc. are finished with 2mm thickmachine pressed PVC edge

banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Double modesty panel height

max 450mm of 18mm Marine ply (IS 710 : 2010) in approved colour and shade as per pre- approved sample.

Modesty panels to be separated by min 50mm clear gap between and cut-outs etc. to make to accommodate

electrical/data switches/sockets where indicated. Cables from floor to the modesty panel should be concealed / fixed

along with the table vertical supports etc. complete. Adjustable levellers to be provided to supports(1200x75

x750mm) as directed and as per drawing & picture with approved make complete etc.

30 NS Dining Chair:Providing and fixing SS (IS 6911:1992) grade of steel 304 Dinning chirs for dining Hall and dining Nos 75.00 8,597.00 6,44,775.00

Room area as per the drawing or approved size and shape including all lead lift shiftingto work location etc. complete

(MCGM 2023, ITEM NO.R3-CS-FUR-25, PG.NO.259)

31 1369 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as Sqm 8.52 9,827.00 83,726.04

per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with

kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both

sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm

including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size

5.00 m x 0.60 m and height is 0.75 m) (Dsr 2023, ITEM 1369, PG.NO.250)

NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (SOUND WORKS)

ITEM NO. Description Unit Qty. Rate Amount

DSR 2023 NS DSR 2023 NS

1 VX-1000MC SITC Matrix Controller Nos 1 2,38,312.80 2,38,312.80

2 PM-100VX SITC Paging Microphone Nos 1 9,812.88 9,812.88

3 VX-100RM SITC IP Remote Microphone Nos 1 1,86,444.72 1,86,444.72

4 RM-110VX SITC Remote Microphone Extension Nos 1 35,046.00 35,046.00

5 DA-X1000S SITC Digital Power Amplifier Nos 2 2,38,312.80 4,76,625.60

6 VX-1010ZE SITC Zone Expansion Panel Nos 1 1,16,703.18 1,16,703.18

7 PC-658R SITC CEILING MOUNT SPEAKER Nos 46 4,415.80 2,03,126.62

8 BS-633A WALL MOUNT SPEAKER 6W Nos 10 4,976.53 49,765.32

10 16-2C 16 Gauge 2 Core shielded speaker cable (305m Roll) with high- Nos 6 75,000.00 4,50,000.00

quality oxygen free copper conducter ensuring excellent sound

quality includes conduiting & cable Pulling

11 SITC of shielded CAT6 cable (305m Rolls) includes conduiting & Nos 3 41,000.00 1,23,000.00

1 Pulz CX10 Point source - 10'' Co-axial speaker system Nos 4 95,927.00 3,83,708.00

2 Pulz CX10 brackets MS Support Accessory for CX10 Nos 4 5,529.60 22,118.40

3 Pulz IW210 MG InWall - Dual 10'' Subwoofer system with metal grill for surround Nos 2 1,18,493.00 2,36,986.00

4 Pulz IW210 Brackets MS Wall Mount Bracket (Vertical Set) For IW210 Nos 2 37,314.00 74,628.00

5 Pulz DSS88 Speaker management system/ Digital X-over Nos 1 1,87,398.00 1,87,398.00

6 Pulz PZ2800 2 channel power amplifier Nos 1 1,35,533.00 1,35,533.00

7 Pulz PZ6300/2 2 channel power amplifier Nos 1 1,15,184.70 1,15,184.70

8 Cables & Connectors Limited Essential audio, line-level interconect cables & connectors Nos 1 40,500.00 40,500.00

1 Pulz EM3 Energy - Dual 15" 2 - way cinema screen speaker system Nos 1 2,43,631.80 2,43,631.80

2 Pulz EW2 Energy - 18" Subwoofer system Nos 1 1,62,621.00 1,62,621.00

3 Pulz IW210 WG InWall - Dual 10'' Subwoofer system with wooden grill Nos 1 1,21,505.40 1,21,505.40

BILL OF QUANTITIES (SOUND WORKS)

ITEM NO. Description Unit Qty. Rate Amount

DSR 2023 NS DSR 2023 NS

4 Pulz SYSTEMWG MS Wall Mount Bracket (Vertical Set) For IW210 Nos 1 37,314.00 37,314.00

5 Pulz CSX10 Point source - 10'' Co-axial speaker system Nos 1 67,124.70 67,124.70

6 Pulz CSX10 Brackets MS support accessory for CSX10 Nos 1 5,988.60 5,988.60

7 Pulz DC12 Point source - 12'' Full range cinema surround speaker system Nos 1 64,081.80 64,081.80

8 Pulz DC12 Brackets MS support accessory for DC12 Nos 1 5,988.60 5,988.60

9 Pulz DC8 Point source - 8'' Full range cinema surround speaker system Nos 1 37,314.00 37,314.00

10 Pulz DC8 Brackets MS support accessory for DC8 Nos 1 5,529.60 5,529.60

11 Pulz XO47 Active Cinema X-over Nos 1 62,515.80 62,515.80

12 Pulz AD4820 DPT - 4 channel power amplifier Nos 1 2,48,772.60 2,48,772.60

13 Rack 36U Equipment Rack -36U Nos 1 1,15,173.90 1,15,173.90

14 Cables & Connectors Limited Essential audio, line-level interconect cables & connectors Nos 1 81,000.00 81,000.00

15 Calibration Technical Calibration Charges Nos 1 1,48,500.00 1,48,500.00

1 BS-1030 Speaker box with elegant softline design fits into modern architecture. Nos 18 33,984.00 6,11,712.00

High quality 2-way speaker in a bass reflex enclosure suitable for flush-

mounting/ surface-mounting wall/ceiling speaker with optional bracket

or on an optional floor stand, including 100V-transformer, 12 cm cone

Woofer and 2.5 cm dome tweeter designed for both music reproduction

and high intelligibility, rotary switch for power adjustment including low

impedance selection on the rear. Low resonance ABS enclosure with

removable metal grille in the same color as the body , with U-brackets

for tilt and pan.

2 A-3224DM-AS The digital mixer amplifier is a 240W high durability, high reliability and Nos 4 1,47,649.50 5,90,598.00

high performance. There are 5 mixing inputs, 3 balanced microphone

inputs with phone jack and 2 inputs with RCA. Microphone 1 have a

separately switchable to switch between phone or RJ45 input whereby

an EC-380 chime microphone can be connected using a cat5 cable. The

mute function and phantom power whereof mic 1 inputs can be turned

on or off. Microphone 4 or Aux 1 come with a selectable input and up to

4 microphones can be connect to the amplifier. This amplifier also

equipped with MP3, FM radio and Bluetooth function.

BILL OF QUANTITIES (SOUND WORKS)

ITEM NO. Description Unit Qty. Rate Amount

DSR 2023 NS DSR 2023 NS

PA SYSTEM Specifications shall follow:

The front panel shall include a Power On/Off switch, Power indicator,

Signal shall be green and Protect and Peak indicator shall be red LED.

The front panel shall include individual Microphone, Auxiliary, and Tone.

The bass/treble tone controls shall be 100 and 10k Hz, +/- 10 dB. The

tone controls shall not affect the Record output. A Master Volume knobs

shall control the main volume. The front panel shall include a MP3

player whereby playback via USB/SD card/Bluetooth with a volume

control. Frequency response: 50 to 20k Hz (+/- 3 dB). THD: <1% at 1k Hz

at rated output. The MIC inputs shall be electronically balanced -60 dB,

600 ohm input impedance, and switchable 21 VDC phantom power

(MIC1). The AUX inputs shall be unbalanced, -10 dBV, 10k ohm input

impedance with stereo-summing dual-RCA pin jacks. The record out is

0dB, 600Ω shall be unbalanced RCA pin jacks. The mixer power amplifier

shall include a selectable output of 100V line out (83Ω) or 4 ohm (22V)

outputs. The mixer power amplifier shall be capable of operation from a

100 - 240 VAC, 50/60 Hz. Power consumption at rated output shall be 44

W. Operating temperature is 0 °C to +40 °C. Dimensions (W x H x D) shall

be 420 x 100.9 x 357 mm. Net weight shall be 4.6 kg. The front panel

finish and material shall be Black, ABS finish and case shall be black steel

plate. The mixer power amplifier shall be desktop standard.

BILL OF QUANTITIES (SOUND WORKS)

ITEM NO. Description Unit Qty. Rate Amount

DSR 2023 NS DSR 2023 NS

EM-380AS The gooseneck microphone shall have a unique shape and high qualities Nos 4 29,815.50 1,19,262.00

condenser unidirectional cardioid microphone element. Frequency

response shall be 50 Hz to 16 kHz. Rated impedance shall be 750 ohm,

balanced, and rated sensitivity shall be –41 dB +/-3dB (1 kHz 0 dB=1

V/Pa). Two gooseneck adjustment points shall provide more flexible

microphone positioning angles. The microphone indicator ring has a

bright Blue LED light upon activated. The microphone base stand output

shall be balanced XLR-3-32 and well-suited for conferences, lectures, and

paging applications. A selector switch which allows to choose power

between phantom power source supplying 9 – 52 volts or 2 x “AA”

battery. Operating temperature shall be 0° C to +40° C (32° F to 104° F).

Body and shaft finish shall be copper alloy, with black paint. Dimensions

shall be 110mm x 145mm x 532 mm, and weight shall be 550 g (without

battery). A windscreen and 7.5 metre microphone cable with stereo

phone jack shall be provided as an accessory.

4 WS-402 Wireless Dual Microphone with below specifications Nos 4 88,050.00 3,52,200.00

System ComponentsHandheld wireless microphone x 1, Wireless transmitter x 1, Receiver x

1, Lavalier microphone x 1

Frequency Range865 - 868MHz, UHF

Channel SelectableUp to 16 channels (depending on region)

Tunable Frequency25kHz Steps

Tone Frequency32.768kHz

Total Harmonic DistortionLess than 1% @ 1kHz

FunctionIR sync, Channel scan, Battery indicator

Included AccessoriesAC adapter x 1, Microphone holder x 1, Screw driver x 1, Lavalier

WIRELESS MICROPHONE

Microphone ElementDynamic with cardioid pattern

RF Carrier Power10 mW

Maximum Input Level140 dB SPL

Audio Frequency Response80 - 15 kHz

Battery1 AA size alkaline battery, 1.5 V

Battery Lifeapprox. 10 hours

IndicatorBattery status LED, 7 segments LED

FinishResin, coating

Dimensions250 x 055 mm, Weight245 g (with battery)

BILL OF QUANTITIES (SOUND WORKS)

ITEM NO. Description Unit Qty. Rate Amount

DSR 2023 NS DSR 2023 NS

PA SYSTEM WIRELESS TRANSMITTER

Microphone ElementBack electret condenser; Omni-directional

RF Carrier Power10 mW, Maximum Input Level-6 dBV, mic gain 0 dB

Audio Frequency Response50 - 15 kHz

Battery1 AA size alkaline battery, 1.5 V approx. 10 hours

Battery LifeBattery status LED, 7 segments LED

IndicatorResin, coating

Finish62 (V) x 100 (H) x 25 (D) mm (with clip)

Dimensions85 g (with battery) Weight

DUAL WIRELESS RECEIVER

Power SourceAC mains (supplied AC-DC adapter must be used)

Power Consumption11-18 V DC 500mA

Audio Frequency Response50 - 15 kHz

Squelch SystemTone SQ, Carrier SQ, Noise SQ

Audio Output Level (Maximum)Balanced (XLR socket) : 16 dBu

Un-balanced (1/4" jack socket) : 10 dBu

Dimensions210M × 44(H) x 202(D) mm (excluding antenna)

Weight720 g Optional AccessoriesMounting bracket kit:

6 Flip 75 75" Touch screen Professional Display Nos 4 4,50,000.00 18,00,000.00

With OPS Core-i5

7 Video Backend Video Connectivity & Cable Set Nos 4 39,828.00 1,59,312.00

8 Audio Backend Audio Connectivity & Cable Set Nos 4 31,800.00 1,27,200.00

9 Cabling Conduiting, Cable Pulling Nos 4 46,500.00 1,86,000.00

10 16-2C 16 Gauge 2 Core shielded speaker cable (305m Roll) with high- Nos 3 75,000.00 2,25,000.00

quality oxygen free copper conducter ensuring excellent sound

quality includes conduiting & cable Pulling

11 Equipment Rack Rack 9U Nos 4 20,100.00 80,400.00

CONFERENCE ROOM

1 UC-M50-U Crestron Flex Advanced Tabletop Large Room Video Nos 3 10,31,499.00 30,94,497.00

2 Flip 65 65" Touch screen Professional Display Nos 3 3,00,000.00 9,00,000.00

With OPS Core-i5

NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (CCTV WORKS)

ITEM Rate Amount

Description Unit Qty.

DSR 2023 NS DSR 2023 NS

1 NS Supplying and installation of Hikvision 64CH NVR 7664NI-M4 Nos 2.00 56,940.00 1,13,880.00

2 NS Supplying and installation of Hikvision 2MP IP camera with MIC Nos 78.00 4,185.00 3,26,430.00

DS-2CD3321G2E-LIU

3 NS Supplying and installation of Seagate Survilliance 4TB HDD Nos 4.00 14,985.00 59,940.00

4 NS Supplying and installation of Hikvision 24 Port POE Switch Nos 6.00 29,625.00 1,77,750.00

5 NS Supplying and installation of4U Rack with tray Nos 5.00 7,335.00 36,675.00

6 NS Supplying and installation of Box Cable manager Nos 5.00 1,125.00 5,625.00

7 NS Supplying and installation of Dlink Cat6 cable in Mtrs Nos 2000.00 180.00 3,60,000.00

8 NS Supplying and installation of Dlink Patch Panel loaded Nos 6.00 12,750.00 76,500.00

9 NS Supplying and installation of Dlink Patch Cord Nos 300.00 270.00 81,000.00

10 NS Supplying and installation of Label Tie for marking 5inch Nos 10.00 1,125.00 11,250.00

11 NS Supplying and installation of Ferrule 10 number for Cat6 cable Nos 10.00 1,125.00 11,250.00

12 NS Supplying and installation of NETWORKING for CCTV, Cable Ferruling, Nos 1.00 2,25,000.00 2,25,000.00

Rack Dressing & LAN Testing, Rack installation with all Equipment’s

13 NS Supplying and installation of Syntel telecom NEOS IT EPBX configured lot 1.00 24,75,000.00 24,75,000.00

for 8 analog lines, ISDN TRI 56IP extensions, 1 operator console device,

7 executive phone devices and 48 standard phone with caller ID, patch

panel cabelling and networking

14 NS Testing and commissioning of all systems JOB 1.00 1,50,000.00 1,50,000.00

NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (FIRE FIGHTING WORKS)

Item Description Unit Qty Rate Amount

No. DSR 2023 NS DSR 2023 NS

1 NS Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with Rmt. 47.00 4,310.25 2,02,581.75

necessary fittings duly painted with two coats of synthetic enamel

paint of fire red colour over a coat of primer (ISC code 536 as per IS

2932 of 2003) complete as per specification no. FF-PP

2 NS Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with Rmt. 34.00 2,037.00 69,258.00

necessary fittings duly painted with two coats of synthetic enamel

paint of fire red colour over a coat of primer (ISC code 536 as per IS

2932 of 2003) complete as per specification no. FF-PP

3 NS Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with Rmt. 45.15 1,603.00 72,378.66

necessary fittings duly painted with two coats of synthetic enamel

paint of fire red colour over a coat of primer (ISC code 536 as per IS

2932 of 2003) complete as per specification no. FF-PP

4 NS Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with Rmt. 68.22 1,258.25 85,837.82

necessary fittings duly painted with two coats of synthetic enamel

paint of fire red colour over a coat of primer (ISC code 536 as per IS

2932 of 2003) complete as per specification no. FF-PP

5 NS Supplying and erecting G.I. pipe ‘C’ class ERW 40 mm dia with Rmt. 57.25 827.75 47,388.69

necessary fittings duly painted with two coats of synthetic enamel

paint of fire red colour over a coat of primer (ISC code 536 as per IS

2932 of 2003) complete as per specification no. FF-PP

6 NS Supplying and erecting G.I. pipe ‘C’ class ERW 32 mm dia with Rmt. 61.91 745.50 46,154.65

necessary fittings duly painted with two coats of synthetic enamel

paint of fire red colour over a coat of primer (ISC code 536 as per IS

2932 of 2003) complete as per specification no. FF-PP

7 NS Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with Rmt. 330.42 635.25 2,09,901.85

necessary fittings duly painted with two coats of synthetic enamel

paint of fire red colour over a coat of primer (ISC code 536 as per IS

2932 of 2003) complete as per specification no. FF-PP

BILL OF QUANTITIES (FIRE FIGHTING WORKS)

Item Description Unit Qty Rate Amount

No. DSR 2023 NS DSR 2023 NS

8 NS Supplying and erecting 63mm dia, controlled percolation (C.P.) hose Each 20.00 7,129.50 1,42,590.00

pipe, 15m in length, fitted with necessary accessories complete as per

specification no. FF-FFA/CPH

9 NS Supplying gun metal double outlet hydrant valve fitted with Each 10.00 30,730.00 3,07,300.00

necessary accessories complete as per specification no. FF-VL/HV

10 NS Supplying and installing wall mounting swinging hose reel drum Each 10.00 12,290.25 1,22,902.50

fitted with 19 mm dia. 30m long high pressure polypropylene

(Polyhose) alongwith necessary accessories complete as per

specification no. FF-FFA/HV

11 NS Supplying and erecting brass orifice plate having 6 mm. thickness, Each 10.00 1,856.75 18,567.50

140 mm outer dia with required diameter of inner hole at every single

outlet hydrant valve as per specification no. FF-FFA/OP

12 NS Supplying and erecting gun metal branch pipe of 63 mm dia fitted Each 10.00 3,540.25 35,402.50

with 20 mm dia detachable hexagonal nozzle complete as per

specification no. FF- FFA/NZ

13 NS Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0- Each 10.00 1,417.50 14,175.00

14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected

with provided G.I. pipe, elbow etc. complete as per specification no. FF-

14 NS Supplying and erecting M.S./CRCA cabinet for housing double hose Each 10.00 12,829.25 1,28,292.50

pipe with nozzle (size 750 x 600x 250 mm.) made from 16 SWG sheet

and angle iron 25 x 25 x 4 mm. having front doors with viewing glass

(8"x6") and locking arrangement with necessary fixing material such

as rubber bidding etc. duly painted in post box red colour( Code 538 of

BILL OF QUANTITIES (FIRE FIGHTING WORKS)

Item Description Unit Qty Rate Amount

No. DSR 2023 NS DSR 2023 NS

15 NS Supplying, erecting, testing and commissioning vane type water flow Each 5.00 13,095.25 65,476.25

detector 75/80 mm dia. with 1) Visual switch activation 2) Rugged

switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable

metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT (

Single pole double track ) synchronised switches 7) serviceable

without draining pipes. as per specification no. FF- SPR/WFD

16 NS Supplying, erecting, testing and commissioning of Upright/ Pendent Each 185.00 784.00 1,45,040.00

quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome

finished, 68º C fixed temperature rating with deflector disc of

conventional construction complete as per specification no. FF-

17 NS Supplying erecting, testing and commissioning of sprinkler flexible Each 100.00 1,233.75 1,23,375.00

pipe of stainless steel complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure of 875 PSI

(Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler

head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of 1200 mm size (UL Listed)

complete as required as per specification no. FF-SPR/FHP

18 NS Supplying and fixing of self expanding, ready to use polyurethane (PU) Each 100.00 2,616.25 2,61,625.00

foam sealant of minimum 750ml bottle, suitable to seal the openings

of all kinds of cables, pipes and cable support system in steel,

aluminium and plastic profiles (except hollow core conductors).

Sealant shall have minimum 2 hour fire rating , conforming to EN 1366-

4:2021 as per specification no FF-FRS.

19 NS Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 Each 10.00 17,400.25 1,74,002.50

kg. capacity cartridge type conform to IS 2878 /15683 complete

erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut

& bolts routed in wall complete.

BILL OF QUANTITIES (FIRE FIGHTING WORKS)

Item Description Unit Qty Rate Amount

No. DSR 2023 NS DSR 2023 NS

20 NS Supplying and erecting 75/80 mm dia. cast iron double flange Each 5.00 5,638.50 28,192.50

butterfly valve of size complete with PN16 pressure rating, as per

specification no. FF-VL/BFV

21 NS Supplying and erecting 65 mm dia. cast iron double flange butterfly Each 1.00 4,740.75 4,740.75

valve of size Complete with PN16 pressure rating, as per specification

22 NS Providing and fixing 50 mm Ball Valve with complete with PN16 Each 8.00 5,929.00 47,432.00

pressure rating, as per specification no. FF-VL/BV

23 NS Providing and fixing 32/40 mm Ball Valve complete with PN16 Each 4.00 4,257.75 17,031.00

pressure rating, as per specification no. FF-VL/BV

24 NS Supplying and erecting 25 mm Ball Valve complete with PN16 Each 13.00 2,581.25 33,556.25

pressure rating, as per specification no. FF-VL/BV

25 NS Providing and fixing inspectors test assembly complete with test Each 6.00 1,531.25 9,187.50

valve, sight glass sectional drain valve, union; necessary piping,

threading, jointing & with corrosion resistant orifice all complete

strictly as per drawing.

26 NS Supplying and erecting ABC powder type fire extinguisher as per IS : Each 12.00 6,562.50 78,750.00

13849 /15683 of 6 kg capacity with necessary clamp for erection on

27 NS Providing Round bottom fire bucket of 9 Litres capacity as per IS Each 12.00 1,750.00 21,000.00

:2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly

painted white inside and red outside with FIRE Mark, on provided

stand/ wall hook complete

TOTAL OF FIRE FIGHTING SYSTEM 25,12,140.00

NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (PLUMBING WORKS)

S.No. DSR2023 Description Unit Quantity Rate Amount

DSR NS DSR NS

1 Water Supply (Internal)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and

fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

1.1 18.8 one step CPVC solvent cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in Charge. Concealed work,

including cutting chases and making good the walls etc. (DSR 2023 18.8)

20 mm nominal dia Pipes Metre 119.00 537.60 63,974.40

25 mm nominal dia Pipes Metre 49.00 627.25 30,735.25

Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end) : (DSR 2023 18.17)

25 mm nominal bore Nos. 10.00 622.40 6,224.00

2 Internal Drainage

Supply, Fabrication, Installation, Testing, Balancing and Commissioning in position Low

noise Silent SWR Poly Vinyl Chloride (PVC) class B 6Kg/Cm² pipes as per IS 13592 and IS

14735, shud be sustain for 13 dB at 2 lps as per EN 14366 with an integral groove to hold

the rubber gasket, having thermal stability to take care thermal expansion/contraction &

2.1 Special brackets to dampen vibrations, including all SWR PVC plain & modulded fittings,

including concealing the pipes in walls or under floors, including making chases in the walls,

fixing vertically against walls by specially made with Hi-tech clamp with EPDM (FLAT)

rubber, Z bracket 5mm thick at every 2m c/c. making good the same, includes jointing of

pipes & fittings etc. complete as per direction of Engineer in Charge. (For Internal Toilet)

Providing, fixing, testing and commissioning of SWR-PVC class B Multifloor Trap with

50mm water seal with 80 mm nominal bore outlet, conforming to IS : IS: 14735 , required 3

2.3 NS no. of inlet connections for 32/40mm dia waste drains, including setting with cement Nos. 15.00 390.00 5,850.00

concrete 1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size)

including cost of cutting and making good the walls & floors wherever required.

BILL OF QUANTITIES (PLUMBING WORKS)

S.No. DSR2023 Description Unit Quantity Rate Amount

DSR NS DSR NS

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-

PVC class B Nahani trap with 50mm water seal with 80 mm nominal bore outlet,

conforming to IS : IS: 14735 , cutting chase / hole in floor / slabs and bringing the same in

2.4 NS proper condition and shape after placing the trap in right position complete as required. Nos. 16.00 375.00 6,000.00

Trap shall include 125/100 mm dia C.P. brass heavy duty grating with frame of approved

design including setting in floor with cement motor to match with floor finish as per

Architect’s requirement.

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-

PVC class B Cleanout Plug with 50mm water seal with 80 mm nominal bore outlet,

conforming to IS : IS: 14735 , cutting chase / hole in floor / slabs and bringing the same in

2.5 proper condition and shape after placing the trap in right position complete as required.

Trap shall include 125/100 mm dia C.P. brass heavy duty grating with frame of approved

design including setting in floor with cement motor to match with floor finish as per

Architect’s requirement.

Supply, Fabrication, Installation, Testing, Balancing and Commissioningg in position SWR-

PVC P Trap with 50mm water seal with 80 mm nominal bore outlet, conforming to IS : IS:

14735 , cutting chase / hole in floor / slabs and bringing the same in proper condition and

2.6 NS shape after placing the trap in right position complete as required. Trap shall include Nos. 4.00 375.00 1,500.00

125/100 mm dia C.P. brass heavy duty grating with frame of approved design including

setting in floor with cement motor to match with floor finish as per Architect’s requirement.

Supply, Fabrication, Installation, Testing, Balancing and Commissioning straight/offset type

flexible single body push fit type WC Pan Connector with factory supplied seal guard with

integrated single mould sealing fins made of flexible EVA Body, including bush/adaptor for

use with CI Pipe as supplied with Pan Connector (For European water closet).

3 Sanitary Fixtures

BILL OF QUANTITIES (PLUMBING WORKS)

S.No. DSR2023 Description Unit Quantity Rate Amount

DSR NS DSR NS

NOTE: Sanitary fixtures and C. P. fittings will be supplied by the owners. However all

other piping accessories and consumables required for fixing and connecting of these

fixtures, such as brass screws, M. S. screws, teflon tapes, hodfasts are to be provided by

Contractor at no extra costs.

(If sanitary fixture will be provided by the owner then other item will be provided by the

contractor with no extra cost )

Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern &

C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with

specials of standard make and mosquito proof coupling of approved municipal design

complete, including painting of fittings and brackets, cutting and making good the walls and

floors wherever required (DSR 2023 17.3)

W.C. pan with ISI marked white solid plastic seat and lid Nos. 17.00 8,006.60 1,36,112.20

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.

3.1.2 17.16A triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - Nos. 17.00 349.15 5,935.55

charge (DSR 2023 17.16A)

Fixing, jointing, and testing in position approved make 15mm dia. C.P. Bib cock / Pillar cock

with areator consisting of the following including making water connections.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved

quality conforming to IS:8931 (DSR 2023 18.53)

15 mm nominal bore Nos. 27.00 861.45 23,259.15

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112

3.4 17.71 mm distance from wall of standard shape with bracket of the same materials with snap Nos. 18.00 168.35 3,030.30

fittings of approved quality and colour, weighing not less than 105 gms.(DSR 2023 17.71)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

3.5 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require:(DSR 2023 17.7)

BILL OF QUANTITIES (PLUMBING WORKS)

S.No. DSR2023 Description Unit Quantity Rate Amount

DSR NS DSR NS

White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per

the direction of Engineer-in-charge.(DSR 2023 17.72A)

Providing and fixing white vitreous china flat back or wall corner type lipped front

urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic

3.7 17.4 flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I

clamps complete, including painting of fittings and brackets, cutting and making good the

walls and floors wherever required : (DSR 2023 17.4)

Range of two urinal basins with 5 litre white P.V.C. automatic

flushing cistern

3.8 17.3 Providing and fixing toilet paper holder : (DSR 2023 17.3)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.

3.9 17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets,

cutting and making good the walls wherever required : (DSR 2023 17.10)

Kitchen sink without drain board

NAME OF PROJECT : - NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

A POWER DISTRIBUTION PANEL AND UPS

MR Supply, installation, testing commissioning, Design, fabrication, assembling and wiring of panels

fabricated out of 16 gauge CRCA sheet steel sections after carrying out 9 tank cleaning process &

duly powder coated using Siemens Grey shade no. RAL- 7032 or as per approved shade in cubicle

compartmentised,free standing, floor mounted, dust and vermin proof with reinforcement of

suitable size, angle iron, channel, ‘T’ sections and / or flats wherever necessary. Cable gland

plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated

with all anticorrosive process before powder coating as per specifications and final approved

shade. 2 Nos. earthing terminals shall be provided for all distrtibution panels. Panels shall be

suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in

case of large panels. Approval shall be taken for each panel in the form of shop drawings before

fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels.The

system shall be provided with Automatic & Manual mode similar :- Please refer Single Line

Diagram for the detail specifications and Comply to IS 8623, IS 13947, IS 11353, IS 2705, IS 1248,

IS 722, IS 13703. i) Main busbars with bar type feeder connections & all internal wiring and

connections. ii) All accessories & supporting structure. iii) All ammeters with C.T's and voltmeter

and energy meters with necessary MCB. (All meters shall be digital) iv)Panel components as

specified. v) MS base frame. vi) All switch gear to have short circuit levels as specified. All Load

Managers to have parameters like KW, KVA, A, V, PF, KVAR, Active & Reactive ( Appx 15-16

parameter ) component of power, as required & desired to complete the system. All metering

shall be of Digital Type & with the necessary BMS compatibility. viii) All MCCBs below 250A Shall

be of Thermal Magnetic type & Above 250A shall be Microprocessor Based. ix) All Fire

Emergency panels shall provide separate BMS compartment and inter panel wiring from

switchgear to BMS compartment shall be in panel builders scope of work. x) Space heaters with

thermostat shall be consider if required. xi) Bus bars shall be designed for easy extension in

future on either side. xii) The construction of MAIN LT PANEL shall conform to a degree of

protection equivalent to IP-51 per IS-13947

PLEASE REFER SLD FOR MORE CLARIFICATIONS

PANEL SHALL BE INDOOR TYPE- IP-43

FAULT CURRENT - 25 kA

All panels Switchgear will be provided with lockout tagout (LOTO)arrangement.

INDICATIONS POSITION

FOR ALL INCOMERS PHASE INDICATION WITH SWITCH POSITION.

FOR ALL OUTGOINGS FOR SWITCH ON OFF & TRIP INDICATION

ALL ACBS WITH - PHASE INDICATION WITH SWITCH POSITION.

PROTECTIONS: SURGE PROTECTION ON INCOMER

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

SINGLE PHASING PREVENTER ON INCOMING BUS FOR PHASE IN BALANCE AND SINGLE PHASE

PANEL SHALL CONSIST OF AUTO CHANGEOVER LOGIC

ALL INCOMERS METER SHALL BE :- SCHNEIDER :- PM- 2230 Series Or Equivalent

ALL OUTGOING METER SHALL BE :- SCHNEIDER :- EM- 6400 NG Series Or Equivalent

ALL METERS SHALL BE COMMUNICATION CAPABLE

2.00 HVAC PANEL ( TERRACE PANEL-IP -65) Nos 1.00 8,70,000.00 8,70,000.00

4.00 UPS INPUT PANEL AND UPS OUT PUT PANEL Nos 1.00 6,75,000.00 6,75,000.00

6.00 Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with Nos 1.00 2,136.00 - 2,136.00

30/100/300 mA sensitivity with earth leakage trip indication complete as per

specification no. SW-RCCB..(For FA FAN )

7.00 Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with Nos 3.00 2,722.00 - 8,166.00

30/100/300 mA sensitivity with earth leakage trip indication complete as per

specification no. SW-RCCB..(For KITCHEN EX. & FA FAN, KITCHEN DRY SCRUBBER )

8.00 32A, 4 Pole RCCB with Weatherproof enclosure with adaptor box for cable termination top and Nos 1.00 2,756.00 - 2,756.00

bottom.(For VRF OUTDOOR )

9.00 40A, 4 Pole RCCB with Weatherproof enclosure with adaptor box for cable termination top and Nos 3.00 2,756.00 - 8,268.00

bottom.(For VRF OUTDOOR )

10.00 63 A, 4 Pole RCCB with Weatherproof enclosure with adaptor box for cable termination top and Nos 3.00 3,092.00 - 9,276.00

bottom.(For VRF OUTDOOR )

UPS SYSTEM - -

11 Supplying,erecting, testing & commisioning of 20 kVA capacity on line pure SET 3.00 2,90,248.00 - 8,70,744.00

sine wave,PWM,IGBT based UPS with 0.9 to unity output pf ,3 phase input &3

phase output complete with all protections as per specification no. AP-UPS

(Without batteries)

phase output complete with all protections as per specification no. AP-UPS

(Without batteries)

12.00 Supplying and erecting 12 V/100Ah SMF battery with battery terminal wire, duly charged SET 3.00 9,549.00 28,647.00

complete with 24 months warranty complete.

B DISTRIBUTION BOARD

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

S.I.T.C. [Supply , Installation, Testing & Commissioning ] of MCB DB. ALL Indoor DB's to be IP43 &

Ourdoor IP55. SITC of DB'S ready made [1.2MM THICKNESS MINIMUM] as per 61439-3 or

fabricated with 1.6MM MINIMUM THICKNESS as per design & site conditions or consultants

requirements. TPN DB shall have 3 nos separate neutral links with internal wiring done as

required with FRLSH copper wire & cable sockets Internal terminations & wiring to be neatly

dressed up in a systematic manner. All MCB to be 'C' & 'D' curve as mentioned & indicators to

be LED All MCB & DB to be approved by consultant before procurement. DB to be fixed surface

or recessed as per requirements

13.0 12 Way TPN DB FOR 4TH ,5TH,6TH,7TH & 9TH FLOOR (LPDB) Nos 5.00 4,118.00 20,590.00

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB

of 12 ways/phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43

Protection provided on iron/GI frame (horizontal busbar type) as per specification no.

14.0 12 Way TPN DB FOR 4TH & 5TH (UPSDB) Nos 2.00 4,118.00 8,236.00

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB

of 12 ways/phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43

Protection provided on iron/GI frame (horizontal busbar type) as per specification no.

15.0 10 Way SPN DB FOR 6TH , 7TH ,EM. LIGHT DB FOR ALL FLOOR & SERVER ROOM Nos 4.00 1,605.00 6,420.00

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2

ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door,

1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as

per specification no. SW-MCBDB

16.0 TPN DB'S INCOMER BREAKER Nos 7.00 369.00 2,583.00

Supplying, erecting & marking SP MCB 40A to 63A, C-series with rated short -

circuit breaking capacity (Icn) 10kA in provided distribution board as per

specification no. SW-MCB

17.0 SPN DB'S INCOMER BREAKER Nos 3.00 535.00 1,605.00

Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - circuit

breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-

18.0 SPN DB'S INCOMER BREAKER Nos 1.00 713.00 713.00

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

Supplying, erecting & marking DP MCB 40A to 63A, C-series with rated short -

circuit breaking capacity (Icn) 10kA in provided distribution board as per

specification no. SW-MCB

Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit

breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-

C CABLE AND CABLE END TERMINATION

SITC of Armoured copper & aluminium , xlpe, cabling to be laid in trenches , cable trays

,walls , floor , ceiling , with labelling as required ,with saddle , spacers in well dressed

manner as required as per site conditions & consultant / architect. All cables shall be

XLPE FRLSH Outer sheathed & pvc insulated wires to be FRLSH Outer sheathed unless

otherwise mentioned

20.0 Supplying, erecting & terminating FR XLPE insulated, galvanised steel MTRS. 110.00 1,102.00 1,21,220.00

formed wire armoured (strip) cable, 1100 V 3½ core 185 sq. mm. aluminium

conductor complete erected with glands & lugs on wall/ trusses/pole or laid in

provided trench/ pipe as per specification no. CB-LT/AL

21.0 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed MTRS. 40.00 2,302.00 92,080.00

wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. copper conductor

complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided

trench/ pipe as per specification no. CB-LT/CU

22.0 Supplying, erecting & terminating FR XLPE insulated, galvanised steel MTRS. 85.00 605.00 51,425.00

formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper

conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in

provided trench/ pipe as per specification no. CB-LT/CU

23.0 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire MTRS. 90.00 398.00 35,820.00

armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete

erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe

as per specification no. CB-LT/CU

24.0 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire MTRS. 50.00 299.00 14,950.00

armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete

erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe

as per specification no. CB-LT/CU

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

25.0 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire MTRS. 20.00 318.00 6,360.00

armoured (round) cable 1100 V, 3 core 6 sq. mm. copper conductor complete

erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe

as per specification no. CB-LT/CU

26.0 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire MTRS. 75.00 244.00 18,300.00

armoured (round) cable 1100 V, 3 core 4 sq. mm. copper conductor complete

erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe

as per specification no. CB-LT/CU

Supply, transport, unloading, shifting & installation in horizontal & vertical formation of

Hot deep galvanized GI ladder type, perforated type hot deep galvanized sheet steel

Cable trays with Cable tray cover,trunking with cover of different widths and delivered

in standard lengths along with Coupler plates and requisite number of hardware, at

different levels along open area , ready made cable trenches, PEB supports etc., in tier

formation as per drawings, standard engineering practice. The Contractor's scope is

inclusive of lifting & placing of trays on supports at different levels, aligning, joining of

trays with couplers, clamping/ fastening to the support of the vertical portions and

wherever required.

All the necessary bends (horizontal/ vertical), tees, cross, elbows, reducers, etc., as per

site condition. The cable tray and all accessories shall be fabricated from sheet steel and

has to be hot dip galvanized against corrosion confirming to ISO 1461-1999 for

installations in both indoor and outdoor applications and should have a Base Perforation

Class B according to IEC 61537. The cable trays shall be supplied in standard lengths of

3000mm and the width of the tray shall be as follows.

PERFORATED TYPE

26.0 Providing & erecting hot dipped galvanised perforated type cable tray MTRS. 50.00 1,018.00 50,900.00

manufactured from 16 SWG GI sheet of 400 mm width & 75 mm height

complete with necessary coupler plates & hardware.

27.0 Providing & erecting hot dipped galvanised cover suitable for MTRS. 50.00 387.00 19,350.00

ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 200

mm width & 20 mm height complete with necessary hardware.

28.0 Providing & erecting hot dipped galvanised perforated type cable tray MTRS. 50.00 590.00 29,500.00

manufactured from 16 SWG GI sheet of 150 mm width & 75 mm height

complete with necessary coupler plates & hardware.

E GI TRUNKING WITH COVER & CONDUIT

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

S & I of pre coated galvanised sheet steel GI raceways factory fabricated out of 1.6mm

pre coated gal sheet steel with cover of flange type. All hardware shall be

electrogalvanised. Raceway shall be embedded in floor for power and data circuits

and all civil works shall be included in the item rate

29.0 Supplying and erecting G.I trunking of 225 x 50mm with cover and accessories on floor MTRS. 10.00 260.00 2,600.00

30.0 Supplying and erecting GI trunking of 100 x 50mm with cover and accessories on floor MTRS. 155.00 140.00 21,700.00

31.0 Supplying and erecting GI trunking of 150 x 50mm with cover and accessories on floor MTRS. 125.00 160.00 20,000.00

32.0 Supplying and erecting HMS PVC conduit 25mm dia. with PVC accessories on MTRS. 135.00 144.00 19,440.00

wall/ceiling as per specification no. WG-MA/CON.

Supply, installation, testing and commissioning of GI -JUNCTION BOX - 16 SWG MM

37.0 Supply, Installation, Testing and commissioning of maintenance free earthing comprising EACH 4.00 12,357.00 49,428.00

of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper

bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly

back fill ground enhancing compound required to fill up the excavated earth with

required quantity complete. Specification no. EA-MOBI

38.0 Supplying and erecting G. I. Earth Wire ( 8 SWG & 12 SWG )of high purity of different KG 100.00 168.00 16,800.00

sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed

on wall/cable/ conduit with screws in an approved manner

39.0 Supplying and erecting G.I. strip (25 x 6 mm ), ( 25 x 3 mm), (30 x 3 mm) of required size KG 250.00 236.00 59,000.00

used for earthing on wall and/or any other purpose with necessary GI clamps fixed on

wall painted with bituminous paint in an approved manner with joint required. as per

specification No (EA-EP).

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

40.0 Supplying and erecting copper strip (25 x 3 mm ) of required size used for earthing on KG 250.00 932.00 2,33,000.00

wall and/or any other purpose with necessary copper clamps fixed on wall painted with

bituminous paint in an approved manner with joints required. As per specification no. EA-

41.0 Supplying and erecting annealed bare copper earth conductor of required sizes KG 120.00 891.00 1,06,920.00

used for earthing on wall with necessary copper clamps fixed on

wall/cable/conduit with screws complete.

TOTAL OF SECTION - F

G LIGHT FIXTURES

SUPPLY &Installation, testing & commsioning of following type of light and fan fixtures

with all related accessories such as supporting rods/ropes/chains / MS pipes/MS or

wooden Frames and necessary hardware etc.

The rate shall be inclusive of fittings,

Required drivers

All accessories.

All luminaires shall be CERTIFIED for

BIS, LEED with Reg- no.

Warranty of Five years

THD less than 7%

The fittings with specified lumen package are expected.

TYPE OF LED FITTING - SMD TYPE

42.0 Supplying & erecting inverter LED batten 20W tube light fitting with NOS. 21.00 851.00 17,871.00

polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600

mA Lithium ion Battery with charging time of 8-10 Hours and backup time of

Min. 3 Hrs with minimum 25% of initial Watts having luminous efficacy of 100

lumen/watt, CRI>80, CCT of 6500K and THD<=20 % having useful life of

minimum 25000 Hrs with over heat protection with minimum 2 years as per

specification No. FG-IDF/LED.

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

43.0 Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W NOS. 244.00 2,887.00 7,04,428.00

having CRCA powder coated housing, polystyrene diffuser having system

lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80,

CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.

>0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of

50,000 Hrs at L70B50 including driver, having mounting arrangement with board

for surface type or spring loaded mounting clips complete with minimum 2 years

warranty as per specification No. FG-IDF/LED.

44.0 Supplying and erecting LED square / circular Max. 18 W down lighter / NOS. 80.00 1,544.00 1,23,520.00

Panel Light having pressure die-cast aluminium housing, polystyrene diffuser

having system lumens output of Min. 2000 Lumens, min. efficacy of 110

lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of

5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5

kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting

arrangement with board for surface type or spring loaded mounting clips

complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

45.0 Supplying and erecting LED square / circular Max. 11 W down lighter/Panel NOS. 33.00 807.00 26,631.00

Light having pressure die-cast aluminium housing, polystyrene diffuser having

system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W,

CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,

THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV,

Life class of 50,000 Hrs at L70B50 including driver, having mounting

arrangement with board for surface type or spring loaded mounting clips

complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

46.0 Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep NOS. 14.00 2,107.00 29,498.00

complete erected in position as per specification no. FG-FN/CF.

TOTAL OF SECTION - G

H POINT WIRING FOR LIGHTING & SMALL POWER

47.0 Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS Point 300.00 781.00 2,34,300.00

PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular

type switch, earthing and required accessories as per specification No: WGPW/

48.0 Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC Point 100.00 196 19,600.00

conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories

as per specification No: WG-PW/CW(OTHER THAN EXHAUST )

SWITCH SOCKET(WITHOUT BOX) -

BILL OF QUANTITIES (ELECTRICAL WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

49.0 Wiring for plug on board with Switch socket surface/concealed type, copper Each 498.00 397 1,97,706.00

wiring and earthing and with modular accessories as per specification No: WGPW/

50.0 Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and Each 648 72 46,656.00

box with wiring connections complete.

51.0 Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety Each 75 186 13,950.00

shutter, duly erected on provided plate and box with wiring connections

52.0 Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate Each 75 108 8,100.00

and box with wiring connections complete

53.0 Supplying and erecting modular type (two module) electronic step regulator Each 14 385 5,390.00

for fan, duly erected on provided plate and box with wiring connections complete

I SAFETEY ITEMS

54.0 Providing & Fixing of printed instruction chart for (with minimum 700 x Each 5 153.00 765.00

1000 mm in size) treating persons suffering from electric shock, printed in

English & Marathi and duly laminated complete.

55.0 Supplying and fixing PVC synthetic elastomer electrically insulating mat sqmtr 5 2,972.00 2,972.00

with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness

56.0 Providing pair of duly tested rubber hand gloves as per IS :47705 suitable Each 5 693.00 693.00

for working upto 22 kV supply complete.

57.0 Supplying and fixing standard first aid box with necessary antiseptic cream, Each 5 922.00 922.00

medicine for use on wounds due burn, crepe bandage, gauge bandage,

medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use,

scissors, antiseptic solution, etc. (All above contents shall be of standard makes)

58.0 Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 Job 1 9,566.00 9,566.00

as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings

with all kinds of cables, pipes and cable support system in steel and aluminium

NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (HVAC WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not

less than 6.5 (1.0

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 28,014.00

2 mA sensitivity with earth leakage trip indication complete as per specification no. SW- Each 7.00 4,002.00

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

3 necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature.(2.0 CPWD-2019)

BILL OF QUANTITIES (HVAC WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

Supply, installation, testing and commissioning of following minimum capacity 1-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

4 necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

Supply, installation, testing and commissioning of following minimum capacity and external

static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable

synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote

5 control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for -

operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall

have automatic force shut down provision in case of fire on receiveing signal from BMS System.

The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature.(4.0 CPWD-2019)

High Static Ductable units (minimum 110 pascal external static pressure)

Supplying and installation of high pressure grade required size copper connection Y or T-

Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber

insulation, painting etc. with brazing and testing for leakages confirming the normal operation

of the VRV/VRF air conditioning system.

BILL OF QUANTITIES (HVAC WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

Supplying, erecting, testing and commissioning centralised programmable remote control panel

(HMI) touch manager controls minimum 16 system of 64 ODU's can be controlled and up to 992

IDU's can be individually mounted and controlled indoor units having colour min 200mm size

LCD touch panel, yearly schedule, power proportional distribution function, temperature

limitation, history function complete erected on wall integrated with provided fire alarm

Providing vaccumising the airconditioner system to 200 micron and charging with R32 / R410A

refrigerant for AC unit.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections

of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other

9 purpose with bending, cutting, drilling and welding complete erected at the position with KG 645.00 279.00 1,79,955.00

necessary materials duly painted with one coat of red oxide and two coats of enamel paint to

match the switchgears or as per directions by the authority.

REFREGRENT PIPE

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :(5.0 CPWD-2019)

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19

mm thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19

mm thick insulation

19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm

thick insulation

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19

mm thick insulation

25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19

mm thick insulation

BILL OF QUANTITIES (HVAC WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19

mm thick insulation

31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation

38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation

41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19

mm thick insulation

supply & installation of PVC piping complete with fittings, supports as per specifications and

11 insulated with 9 mm thick closed cell elastomeric nitrile rubber insulation.

ELECTRICAL SECTION

Supply, Installation, Testing & Commissioning of All control cables between indoor and

outdoor unit laid in PVC Piping and clamped.

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm.

12.1 copper conductor complete erected on wall/ ceiling complete as per specification. M 350.00 202.50 70,875.00

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured

(strip) cable 1100 V, 3 core 4 sq mm copper conductor complete erected with glands & lugs, on

wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured

(strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs,

on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured

(strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs,

on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

BILL OF QUANTITIES (HVAC WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers,

vanes, hangers, supports etc. as per approved drawings and specifications of following sheet

thickness complete as required.(16.12.1 CPWD 22-23)

14 Supply, Fabrication & Installation of Air Flow Controller for All Cassette. -

Supply, fabrication, installation and testing of flexible canvas connections constructed between 1,36,291.50

15 ductable unit/ventilation fans / dampers/ducting of suitable size with fire resist flexible double Each 31.00 4,396.50

canvas sleeve complete.

Supply, installation, testing and commissioning of GI volume control duct damper complete

16 with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications sqm 2.00 6,500 13,000.00

17 Supplying, installing, testing and commissioning of disc valve dia 4" as per specification. Each 24.00 2,700.00

Supplying, installing, testing and commissioning of Non Insulated Flexible Duct dia 4"as per 13,125.00

Supplying, installing, testing and commissioning of Bird screen shall made out of 25 x 25 mm 15,750.00

18 2.5mm GI wire mesh inset with 0.8mm GI frame and bolted to the enclosure flange at 150mm sqm 3.00 5,250.00

center using 12mm MS brass bolts and nuts.

19 Grills & Diffusers

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium

19.1 with aluminium volume control dampers with anti smudge ring & removable core.(16.17 sqm 10.00 12,184 1,21,840.00

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium

without volume control dampers with anti smudge ring & removable core.(16.18 CPWD 22-23)

BILL OF QUANTITIES (HVAC WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium

volume control dampers as per specifications.(16.15 CPWD 22-23)

THERMAL, ACOUSTIC INSULATION & UNDERDECK WORKS

Supply, installation, testing and commissioning of 15mm thick Internal Duct acoustic insulation

using food grade adhesive with open cell structured Fire Retardant nitrile rubber with minimum

density 140-180 kg/m3 from inside of the supply air ducting upto 3 mtr.length from unit mouth

as per the specifications.

Supply, installation, testing and commissioning of 19 mm thick Duct Thermal insulation fire

retardant , closed cell structured factory laminated 7 mill glass cloth Nitrile insulation of

density 40-60 kg/m3 shall be with two coats of lag coating ( Anti-fungal & vapour barrier -5590

standard) wrapped with glass woven clothed surface For Supply and return insulation.

Supply, installation, testing and commissioning of closed cell structure both side plain type

25mm thick nitrile rubber insulation of density 40-60 kg/m3 for underdeck ceiling insulation

22 with food grade adhesive and proper fixing with required accessories etc. with two coats of lag Sqm 250.00 1,099.50 2,74,875.00

coating ( Anti-fungal & vapour barrier -5590 standard) over it.( For Below Terrace & Service

VENTILATION SYSTEM

Supply, installation, testing and commissioning of Inline fans for exhaust and fresh air shall be

complete with speed control, louver shutter, suitable starter panel, rain protection louver, bird

23 screen. Fans to be ring mounted on suitable frame provided by AC Contractor. Power will be

provided 5 ft away from fan and necessary wiring with plug will be provided by AC contractor.

Starter panel shall be BMS compatible.

Exhaust and Frsh Air Fan -

23.1 290 CFM / 15 MM Static - Fresh Air Fan for Ductable Each 1.00 21,750.00 21,750.00

23.2 400 CFM / 15 MM Static - Exhaust Air Fan for Toilet Each 4.00 30,000.00 1,20,000.00

23.3 435 CFM / 15 MM Static - Fresh Air Fan for Ductable Each 1.00 32,625.00 32,625.00

23.4 500 CFM / 15 MM Static - Fresh Air Fan for cassette Each 1.00 37,500.00 37,500.00

23.5 560 CFM / 15 MM Static - Fresh Air Fan for cassette Each 1.00 42,000.00 42,000.00

23.6 780 CFM / 15 MM Static - Fresh Air Fan for cassette Each 1.00 58,500.00 58,500.00

23.7 810 CFM / 15 MM Static - Fresh Air Fan for cassette Each 1.00 60,750.00 60,750.00

23.8 2400 CFM / 42 MM Static - Fresh Air Fan for Kitchen Each 1.00 1,80,000.00 1,80,000.00

23.9 2600 CFM / 42 MM Static - Exhaust Air Fan for Kitchen Each 1.00 1,95,000.00 1,95,000.00

BILL OF QUANTITIES (HVAC WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

Supply, Installation, Testing and Commissioning of Scrubber EACH comprising of extract air

intake section, electrostatic precipitation technology, dry type air cleaner to remove oil,

smoke and fumes from exhaust air, as per the Specifications. It also include require co-

ordination and connecting pieces to installation the scrubber along with respective exhaust air

fans: Electrostatic section shall be made of 16 gauge galvanised sheet, high bake epoxy powder

coated, washable type aluminium mesh filters, stainless steel spiked ionizers to create high

voltage DC field, aluminum collector plates which should be alternatively charged positive and

negative with large collecting area with 14" deep cell, to work as magnet for charged smoke

and oil particles. Average efficiency of 90-95% in single pass as per ASHRAE test method.

Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns

through solid state power supply. Collector cell should be of permanent type and incorporate

slide out facility for easy removal for cleaning. Power supplies shall be 100% solid state UL/CE

Listed, Module of capacity above 2600 CFM shall be equipped with Pulse width modulating

(PWM)The system should be fitted with interlock switch for safety . The system should allow

connection to a fan section to achieve 500 FPM velocity across the air cleaner with scubber

Supply, Installation, Testing and Commissioning of perforated painted with powder coating

M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended

25 from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as -

25.1 150 mm width X 50 mm depth X 1.6 mm thickness Each(4.3.2 CPWD 22-23) M 100.00 1,186.00 1,18,600.00

SUB TOTAL LOW SIDE WORK

Supplying, installing, testing & commissioning split type variable speed inverter technology with

minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.5TR capacity

having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of unit

hi-wall type complete with refrigerant R32/R410A having copper condenser, minimum 2.5PM

filter, self diagnosis feature, drain pump, stabilizer free operation & temperature display on

indoor unit, noise level maximum 50dBA at position as per specification.

Supply, installation, testing and commissioning of PLC sequential controller for sequencing,

programming and scheduling the interconnected AHUs with pre-defined duty cycle for equal

run, auto stand'by changeover, fault take'off, etc. as per working requirements complete all as

specified and directed by the engineer-in-charge.

BILL OF QUANTITIES (HVAC WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

Supply, Installation, Testing & Commissioning of All control cables between indoor and outdoor

unit laid in PVC Piping and clamped.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured

28.1 (strip) cable 1100 V, 4 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, M 30.00 216.00 6,480.00

on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured

28.2 (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, M 15.00 259.50 3,892.50

on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

SUB TOTAL DX SYSTEM

NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (NETWORKING WORKS)

ITEM NO. DISTRIBUTION UNIT QUANTITY

DSR 2023 NS DSR 2023 NS

2 Cat 6 Jack Panel 24 Port Loaded Nos 4 15,817.20 63,268.80

3 Cat 6 Patch Cord - 1Mtr for Rack Side Nos 130 485.10 63,063.00

4 Cat 6 UTP Cable ( Box of 305 Mtr ) Nos 12 28,782.60 3,45,391.20

Cisco CBS350-48T-4G- V04 - 10/100/1000 Giga unmanaged 7,98,000.00

Switch for Data

6 Dual Face Plate With Surface Box Nos 50 367.50 18,375.00

8 Netgear 8 Port POE Switch for POE Access Point Nos 6 19,110.00 1,14,660.00

9 Termination of Cat 6 I/O's With Dual Face Plate Nos 130 249.90 32,487.00

10 Termination of Jack Panels Nos 4 4,851.00 19,404.00

11 Valrac / WQ Make 6U Rack 600x500 for Network Rack Nos 3 19,110.00 57,330.00

12 Valrac / WQ Make 9U Rack 600x500 for Network Rack Nos 2 32,340.00 64,680.00

13 Installation & Configuration of AP's Nos 7 5,439.00 38,073.00

14 Installation of Rack Nos 1 3,675.00 3,675.00

15 Cable laying with Conduiting Nos 3200 235.20 7,52,640.00

NAME OF PROJECT : - Repair & Renovation work at NFDC Mumbai

BILL OF QUANTITIES (ACOUSTICAL WORKS)

Item No. Description Unit Qty Rate Amount

DSR 2023 NS DSR 2023 NS

Dry Wall: (+150mm From Existing Wall) Sqm. 200.00 13,372.00 26,74,400.00

Sound Dampner 22mm, FR Wooden Stud, and Absorb Wool 100mmx1500GSM

Providing and Fixing of Sound Dampner 22mm 1218x1218 mm made of 20 mm

compressed wood cement composites 1250Kg/m3 and 2mm dampner sheet. (37 STC

1 for 22 mm ). To be installed on FR Wooden Frame 600x600mm centre to centre with

backing of HIMALYAN ACOUSTICS/ ANUTONE / GIK ACOUSTICS. 50mm thick,1000

GSM absorb wool tested as per Fire etardant ASTMD 635-1991/Insulation and IS

15061-2002 for excellent results.

Absorption Wall Framing : (+100mm From Dry wall) Sqm. 200.00 4,034.00 8,06,800.00

Providing and Fixing of 100 mm Framing of G.I studs 600x600mm framing centre to

centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled

giving it high strength, hot dipped galvanized steel with 120GSM zinc coating

2 specially designed for Acoustic vibration management and long life with infill of

HIMALYAN ACOUSTICS/ANUTONE / GIK ACOUSTICS. 100mm thick,1500 GSM absorb

wool tested as per Fire etardant ASTMD 635-1991/Insulation and IS 15061-2002 for

excellent results.

Stretch fabric on Above G.I Framing Sqm. 200.00 13,954.00 27,90,800.00

Providing and Fixing of Himalyan Acoustics/ANUTONE / GIK ACOUSTICS Stretch

Fabric System on GI Graming 2400mm X 50x50 mm with backing of Confy Panel

3 15mm thick and acoustical foam 10mm thick. Then 12mm/20mm Vinyl tracks are

screw fixed on to the 6mm Ply and Acoustics panels. Then the fabric is stretched over

the Vinyl tracks. Fabric colour as per Architect choice-Ref attached specifications for

Pyramidal diffusers 610x610mm Sqm 100.00 2,834.00 2,83,400.00

Providing and Fixing of Pyramidal diffusers quickly and easily eliminate floor to

ceiling standing waves. They reduce flutter echo while maintaining a warm room

4 sound. Molded in a one-piece pyramid shape, their offset apex provides four different

angles of reflection. The internal cavity of the Pyramidal Diffuser can be lined with a 1

thick layer of glass fiber batting to increase absorption and prevent resonance. To be

installed directly.

BILL OF QUANTITIES (ACOUSTICAL WORKS)

Item No. Description Unit Qty Rate Amount

DSR 2023 NS DSR 2023 NS

Ceiling Absorption ( Horizontal design) Aphony Fibrette 15mm Thick Sqm 100.00 13,280.00 13,28,000.00

600x600/600x1200 mm NRC1 with GI Stud

Providing and Fixing of APHONY FIBRETTE tiles made of Wood Fibre 1mm width

cement composites 15mm thick with an option of colours as per the choice of the

Architect/ person in charge of size 600x600/600x1200x15 mm . Has excellent noise

absorption of 1 NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400 Kg/ m3,

meets stringent Fire Ratings ASTMD-876 and Fire Class -1 as per BS 476 part 5 and

6,Class P-not easily ignitable as per BS-476-Part 5 (Ignitability for material).This is

applicable for core and class 1 as per BS 476-Part 7 (Method for classification of

surface spread of flame) , weather resistance as per IS 3308, Thermal Insulation as

per IS:3346-1980 with relative humidity of 90% RH at 60o Celsius(140o Fahrenheit)

for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint

with Comfy Panel 15MM thick 2000 GSM . To be installed 100 mm Framing of G.I

studs 600x600mm framing centre to centre 2400mm X 50mm web thickness 0.5mm,

flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel

with 120GSM zinc coating specially designed for Acoustic vibration management and

long life with infill of HIMALYAN ACOUSTICS/AUDIOPHILE GOA/ ANUTONE / GIK

ACOUSTICS. 100mm thick,1500 GSM absorb wool tested as per Fire etardant ASTMD

635-1991/Insulation and IS 15061-2002 for excellent results.

Acoustical Door: Providing and Fixing of of Acoustic Door of 54 mm having an STC Sqm 12.00 1,15,650.00 13,87,800.00

rating upto 50. The Door will be led with high acoustic materials of 2 layers of 4 mm

Iso Shield,8mm water proof Acoustic Ply and 30 mm compressed insulation. Door

6 frame will be made of teak wood (Sudan Teak). Frame on all four sides or three sides

frame and drop seal below will be provided along with the door. High load bearing

hinges(10 Nos) will be provided along.

Removing & refixing new Carpet of NYLON 2400GSM wall to wall carpet-100% Made Sqm 100.00 8,096.00 8,09,600.00

Stage Ceiling Cloud Panels: Cloud panels 22mm thick composite panelsuspended Sqm 100.00 8,342.00 8,34,200.00

from the framework above