Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹23.9 L+₹1.6 L (7.27%)Rejected-Finance FLAT NO 107 C WING SKYWAYS SERENO LOHEGAON PUNE 411 047 | PUNE | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance not being lowest | |
| 3 | L3₹26.5 L+₹4.3 L (19.1%)Rejected-Finance | L3 | Rejected-Finance not being lowest | |
| 4 | L4₹27.8 L+₹5.6 L (25.1%)Rejected-Finance | L4 | Rejected-Finance not being lowest | |
| 5 | L5₹29.4 L+₹7.1 L (32.0%)Rejected-Finance | L5 | Rejected-Finance not being lowest |
Tender Value
₹29.1 L
EMD Value
₹58,200
Closing Date
22 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (CME) Kirkee
Garrison Engineer (CME) Kirkee, Phugewadi, Dapodi, Kendriya vidyalay Gate , beside Unlimited (Mega Mart) Mall, Pune - 411 012
Provn of storage accn at BSO yard, provn of FLY proofing in GCs mess of CTW and upgradation of windows at P-350 and P-351 (Types-IV offrs md accn) at CME, Pune
2022_MES_532150_3
8318/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (CME) Kirkee
Class D a(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (CME) Kirkee
₹58,200
20 Sept 2022
8 Aug 2022
24 Aug 2022
8 Aug 2022
22 Aug 2022
9 Aug 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil etc. complete all as specified and directed.
Excavating over areas, n. exc. 1.5 m deep and 1.5 m in depth and getting out in hard/ dense soil etc. complete all as specified and directed.
M& L for cement concrete 1:2:4, type B - 2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete in post holes etc. complete all as specified and directed.
S&F steel work of grade Fe - 410 W (Gde E -250) quality B inroof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and directed. Note : Steel frame work will include post, truss, purline, rafter, runner, bracings etc.
S&F steel work of grade Fe - 410 W (Gde E -250) quality B mild steel plates (plain or chequered) 5 mm or over in thickness in available sizes complete all as specified and directed.
M & L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for excavating in trenches in hard/dense soil, n. exc. 1.5 mwide and not exceeding 1.50 m depth for foundations etc. n. exc. 10 sqm on plan and getting out complete all as specified & directed.
M& L for cement concrete 1:4:8, type D - 2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete below wall etc. complete all as specified and directed.
M&L precast solid block masonry of block 1:3:6 type C-1 using 20mm graded stone aggregate as in wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.
M & L moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering
M&L hardcore of guage exc. 63mm but n. exc. 100 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled/rammed to a true surface
M&L for 75mm thick PCC 1:4:8 type D2, using 40mm graded stone aggregate as in sub base etc. complete all as specified and directed.
M&L for 100 mm thick PCC 1:2:4 type B - 2, (using 40 mm graded stone aggregate) as in floor finish even and smooth without using extra cement etc. complete all as specified and directed.
M&L 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection,laid to slope 1:12 and finishing cement concrete surface even and smooth w/o using extra cement with and including all necessary form work to divide the area in panels finishing exposed edges fair or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) etc. complete all as specified and directed.
M&L preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed
Returning, filling in, including spreading, levelling watering and well ramming in layer not exc. 25 cm in soft/loose soil
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
M&L for PCC (1:3:6 ) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
M&L forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' etc. complete all as specified and directed.
S &F steel rolling shutters, 1.25 mm thick laths, but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete push pull or manual type
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to E.290.Gde-E-165 etc. complete all as specified and directed.
S&F sheet glass, ordinary quality, 3 mm thick and glazing with oil putty or fixed with wooden beads in squares n. exc. 0.5 sq. m each pane etc. complete all as specified and directed.
M&L for point wiring with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc.
One light point controlled by one switch
One fan/exhaust fan point controlled by one switch and regulator
Socket outlet, three pin 5 Amps on the same board
Socket outlet, three pin, 5 Amp, independent
All as per item No.27 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.
S & F switch piano, flush type, single pole one way 5 amps complete all as specified and directed.
S & F switch piano, flush type, single pole one way 15 amps complete all as specified and directed.
S & F socket outlet 2 in 1, 5 pin, 5 amps flush type complete all as specified and directed.
S & F switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and directed.
S & F ceiling rose, PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.
S&F surface and wall mounted LED batten (LED tube light fitting 20W) with polycarbonate housing & integrated electronic driver alongwith LED tube 20 watt and 02 No PVC square blocks incl taking down old UNSV fitting. Make- Havells cat No LUMILINEBS20WLED830SPCWH or equivalent of Philips/Bajaj/shakti
S&F building security LED light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 including suitable size bracket incl taking down old UNSV one. Make - Havells cat No ENDURAPEARLSL25WLED757SASYTOPC or equivalent of Philips/Bajaj/shakti
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
Supply and fixing of industrial wall mounted plug socket 32 Amp, 3 phase including MCB TPN 32 Amp complete all as specified and directed
S&F load line vertical TPN distribution board 4 way including 1 incommer MCCB of 100 Amps 4 pole double door IP-43 protection, powder coated, IK08 with provision of suitable size bus bar and cable management kit complete all as specified and directed. Make : Indoasian cat part No 811888 or equivalent in Hager/Havells/Legrand
M&L for sub main wiring with two run of 4 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC conduit of desired colour not less than1.2 mm thick and 25 mm wide & 4 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.
All as per item No.39 above, but size 4 Sqmm Four runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.
All as per item No.39 above, but size 1.5 Sqmm two runs and with one run 1.5 Sqmm FRLSH copper wire for earth continuity.
S&F MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one.
S & F MCB SP 6 to 32 Amps, 230 V AC incl taking down old unserviceable one complete all as specificed and directed.
S & F MCB SPN 40 to 63 Amps, 230 V, AC incl taking down old unserviceable one complete all as specificed and directed.
S & F MCB TPN 63 Amps,415 V, AC incl taking down old unserviceable one complete all as specificed and directed.
M&L for earthing complete with GI earth plate electrode 60x60cmx6mm thick burried directly in ground in earth pit not less than 2.25 mtr depth below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to & including GI lead 4 mm dia as earthing lead connecting to equipment by means of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR part-I 2009 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork in any strata and testing on completion etc. complete all as specified and directed by Engineer-in-charge.
Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good surface for laying /removing of cable all as specified and directed.
Soft/loose soil
Supplying and laying GI tubing light grade of size 40mm dia bore for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/ sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed by Engr-in-charge.
Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl connection with proper sizes lugs and gland, suitable clamp of cross sectional area 3.5 core 95 Sqmm all as specified and directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl connection with proper sizes lugs and gland, suitable clamp of cross sectional area 3.5 core 50 Sqmm all as specified and directed.
Supply & Laying DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 77 mm and inner dia 63 mm polythylene with smooth internal and profiled external surface for non pressure under ground cable incl couplers & bends complete all as specified and directed. Make : REX POLYEXTRUSION LTD or its equivalent as approved
Supply, install, connect, test and commissioning factory made, dust/vermin, weather proof self ventilated, cubical of size 1.5 x 0.50 x1.2 (aps) with front made of and rear opening, hinged door for front,and rear with MS angle iron frame 50 x 50 x 5mm for base support, 3.15 mm thick CRCA sheet, LT panel board, (LT KIOSK), CPRI approved out door, cubicle type, floor mounted, double door with neoprene gasket and locking arrangement with canopy including painting with powder coated on steel surfaces internally & externally and provision of two Nos earth terminals on both sides, cable glands and PCC foundation with PCC 1 : 2 : 4, type B1, and 30 cm all around the outer dimension of panel including gap for insertion of cable having bottom of panel at height of 45 cms above, the ground level with cable entry glands to accommodate and including the following accessories:-
Copper bus bar rectangular 300 Amps full for phase and half for neutral mounted on epoxy insulators with colour coding PVC sleeves.-01 job
MCCB 200 Amps, TPN, 415 Volts, 50 Hz, 36 KA - 01 No (Incoming)
MCCB 125 Amps, TPN, 415 Volts, 50 Hz, 36 KA - 01 No (Outgoing)
MCCB 63 Amps, TPN, 415 Volts, 50 Hz, 36 KA - 04 No (Outgoing)
RYB LED Indicator Lamp- Set of Three-01
Provision of cubicle to accommodate the above mentioned accessories.
Internal wiring of panel board, metering equipment with suitable size PVC insulated, unsheathed, 1100 V grade cable with multistranded copper conductor, including provision of lugs/thimbles on either ends of cable.
M & L for earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms thick burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanised iron strip of 25 x 4 mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 40 mm dia GI tubing light grade protection pipe upto test point, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30x30 CM made of RCC 1:3:6 with suitable handle, angle iron frame of angle iron size 40 x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site all as specified in plate No 3 of SSR Part-I 2009 and directed by Engr-in-Charge.
S & F 2nd class hard wood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred put together with glue pinned at joints etc. complete all as specified and directed.
S & fixed 2nd class hard wood 35mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed.
S & F mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified and directed.
S & F 150mm long aluminium anodised handles of extruded section complete all as specified and directed.
S & F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor including 140mm overall length of cover plate etc. complete all as specified and directed.
M & L for preparing new surface of wood of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F powder coated aluminium sliding windows three track with two glass shutters using 5mm thick glass tinted and one shutter with stainless steel wire (gauge wire) cloth 0.31mm nominal dia of wire and width of aperture 1.61mm using aluminium powder coated sect, aluminium cleat, PVC track, bearing, handle lock rubber beading etc. complete all as specified and directed. Note: Size of aluminium sections are as under:-
Three track top & vertical - Jindal main-- 2010 Section No. 20621.
Three track bottom - Jindal main-- 2010 Section No. 20620.
Shutter vertical section- Jindal main-- 2010 Section No. 20606.
Shutter top & bottom - Jindal main-- 2010 Section No. 20604.
Shutter vertical middle (interlock) - Jindal main-- 2010 Section No. 20605.
S & F powder coated of any colour, anodised, aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S & F stainless steel (wire gauge) wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm & fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutters from the frames) not exc. 1.5 sqm each and removing from site complete all as specified and directed.
Taking down chowkats or frames, exc. 1.50 sqm but not exc. 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
S & F aluminium powder coated ventilators partly fix and partly louvered of aluminium section designed DG-2762 (40mmx32mmx1.5 mm thick) (wt 0.668kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40mm x 32mm x1.5mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27mm x 17.15mm x 1.22mm thick) (wt 0.124 kg/mtr) including 5mm thick pinheaded figured glass louvers with blades of 100mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed minimum 6 Nos of suitable size galvanised screws with PVC plug complete all as specified and directed.
M & L rendering 15mm thick on stone masonry surfaces in CM 1:6 finished even and smooth with sagol over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 complete all as specified and directed.
M & L preparing newly plastered surfaces of wall and applying complete wall with 3mm thick POP/Birla putty for making smooth surfaces and applying two coats of oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.
M & L for cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fast and other similar works and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of necessary form work etc. complete all as specified and directed.
Mukund Engineers and Contractors
Aishwarya Constructions
SHINDE DHEERAJKUMAR SIDRAM
Vastushilpa Contrustion
VAISHNAVI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .