IMPROVEMENT TO CERTAIN BLDGS AND WATER SUPPLY PIPE LINE IN MD ACCN UNDER AGE BR-I OF GE (AF) ADM AREA AT AF STATION AGRA

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radious, old size built in CM (1:6) complete all as specified and directed.

M&L for brickwork with fly ash brick straight or curved on plan to any radius in half brick thick walls old size built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for preperation of newly plastered wall surface & applying three coat of white wash on wall surface complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.50 mm graded stone agg) as in flooring finished even & smooth without using extra cement, complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premisesas complete all as specified and directed.

M&L for glazed ceramic designed coloured tiles 300 x 450 mm x 7 mm/ 450 x 350x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premisesas complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 15mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling Stone slabs and tiles of any description or thickness in laid, bedded and pointed in any mortar floors, aprons etc., removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed.

Taking down door shutter and re-fixing in same opening after necessary alteration to door shutter of size exc 1 sqm and not exc 2 sqm complete all as specified and directed.

Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed

M&L TMT bar 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I)

Ditto all all as item-14 above but 6 to 8mm dia

M&L RCC 1:2:4 ( Type A 1 ) using 20 mm graded aggregate in slabs supported on walls , beams, columns and similar work etc . including demolation of RCC chajjas, slab, beam and similar work as specified and as directed.complete all as specified and as directed.

Taking down steel tubing necessary fittings connection etc for 20 mm bore pipe and refixing old steel tubing and connections in new or old position of 20 mm bore complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia including taking down steel tubing necessary fittings connection etc for 20 mm bore pipe complete all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm dia including taking down steel tubing necessary fittings connection etc for 15 mm bore pipe complete all as specified and as directed.

Cutting chases, pinning in, brick walls and making good to facing where required and pointing in CM (1:3) to ends or edges and making good cutting not exc 10 cm girth complete all as specified and directed.

M&L for 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe for concealed pipe lines in walls including taking down steel tubing necessary fittings connection etc for 20 mm bore pipe complete all as specified and as directed. (Note : The rates for pipes in RM including short lengths, with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc complete all as specified and directed.

M&L for 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6Kgf/cm2 fixed to wall or floor complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern complete all as specified and directed.

S&F in repair stainles steel sink with draining board made out of stainless steel 1.00mm thick sheet for kitchen with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe over all size 915mmx460mm with bowl size 410mmx330mmx160mm incl waste pipe etc complete all as specified and directed.

S&F in repair PVC 32/40mm dia flexible waste pipe 800mm long with socket fixed with sink/Wash basin waste coupling complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm angle stop value chromium plated fancy type complete all as specified and directed.

S&F in repairs CP Bib taps 15 mm bore long body, cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed.

S & F in repairs vitreous china wash down water closet ( pedestal pattern), white, including PVC seat cover white with hinging device etc complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and directed.

S&F in repair wash hand basin vitreous china wash basin white flat back size 550x400 including supplied and fixed angle iron brakets errecting stand, CP waste coupling, waste pipe complete all as specified and directed.

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement complete all as specified and directed.

S&F Waste fittings 40mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair brass chromium plated shower roses with swivel joints 125mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Chromium plated Towel rail 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified and directed.

S&F in repair Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and directed.

S&F in repair Plastic water closet seat, white ISI Marked, closed pattern with flat bottom and cover and mild steel chromium plated hinges device complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair 15mm dia hot and cold centre hole wash hand basin mixer, chromium plated, fancy type complete all as specified and as directed. Make : Cat Part No- Prayag - Frost 7750, Jaquar- SOL 61678 or Plumber NTO 5102.

M&L in repairs wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, centre knob operated L-bend for head shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Cat Part No Prayag- 6575, Jaquar- SOL 6281 or Plumber CP-CRS 3000LB.

S&F in repair sink Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. Make: PRAYAG CAT PART No- 6514, Jaquar- CON-349KNM or Plumber- PST-1102

S&F soap dish, brass chromium plated, oval shaped of size 100 x 50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.

S&F Towel Ring of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 90 gms) complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity with 20mm dia PTMT float valve incl dismantling of existing water tanks complete all as specified and directed.

S&F sheet glass corner self of 3 tier assembly consisting of 5.5mm thick sheet glass self 15cm radius with chromium plated bracket guard and rail and fixed with CP screws and wood cleats with wall complete all as specified and directed.

S & F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm with tinned tacks or galvanised wire staples windows complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) not exc 1.5 sqm complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F box type steel window/ventilator with pressed steel frame made out from 1.25mm thick steel having two rebete with glazed shutters and fly proofing shutters including guard bars etc complete all as specified & shown in drg CE/ALD/TD-172 sh 1/2 & 2/2

S&F Figured glass 3.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of 100mm size for PVC door shutter complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed.

S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall including taking down eaves gutters and rain water pipe (any size or pattern ) including all fittings , heads, shoes, bends, swan-necks etc. complete all as specified and as directed.

S & F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall taking down eaves gutters and rain water pipe (any size or pattern ) including all fittings , heads, shoes, bends, swan-necks etc. complete all as specified and as directed.

S & F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor taking down eaves gutters and rain water pipe (any size or pattern ) including all fittings , heads, shoes, bends, swan-necks etc. complete all as specified and as directed.

S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repair PVC floor trap 125/110mm dia including jointing to waster pipe fixed in cement conccrete type- B1 (1:2:4) complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) branch piece single (Single Y) equal or unequal any radius complete all as specified and directed.

S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished surface should be even and smooth including WPC @3% by weight of cement complete all as specfied and directed. Note :- WPC shall be measured and paid for separately.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for rendering 10mm thick on concrete surfaces of ceiling with CM (1:4) and finished even and smooth without using extra cement complet all as specified and directed.

Complete removal of existing treatment of any type/description from ceilings / RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

M & L for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, over 1 mm thick wall care putty and a coat of alkali resistance priming paint exterior grade applied @ 0.90 litre/ 10 sqm on newly plastered external surfaces including preparation of surfaces complete all as specified and directed . Note : Apply second coat after first coat is dry approx 6-8 hours between two coat and Colour code of paint as approved by GE

M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manufacture including three coat of white wash complete all as specified and directed.

M & L for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, over a coat of alkali resistance priming paint exterior grade applied @ 0.90 litre/ 10 sqm on old plastered external surfaces including complete removal of existing any type of decorated surface by means of mechanical equipment and preparation of surfaces complete all as specified and directed . Note : Apply second coat after first coat is dry approx 6-8 hours between two coat and Colour code of paint as approved by GE

M&L for washing, rubbing down and stopping of old decorated surfaces of walls and applying one coats of weather proof emulsion paint including preparation of surfaces complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 25 mm dia including taking down steel tubing necessary fittings connection etc for 25 mm bore pipe complete all as specified and as directed.

S&F repairs for 20 mm stop valve, cast iron , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of 20mm bore of pipe fixed as in repair complete all as specified and directed..

S&F repairs for 25 mm stop valve, cast iron , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of 20mm bore of pipe fixed as in repair complete all as specified and directed..

S&F fix in repairs tripple layer 1000 ltrs rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) white in colour hoisted and fixed in position including flot valve complete all as specified and directed.

repair and fix PVC water tank covers for 500 to 1000 ltrs rotational moulded polyethlene water storage tanks capacity complete all as specified and directed.

M&L Cast iron soil, waste and vent pipe, Centrifugal type 100mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified including taking down of existing unserviceable pipe complete all as specified and directed..

M&L Cast iron soil, waste and vent pipe, Centrifugal type 100 mm bore, spun cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work complete all as specified.after including down of existing unserviceable pipe complete all as specified and directed..

M&L CI Cowl Centrifugal type suitable for 100 mm bore pipe as in repair complete all as specified and directed.

M&L Cast iron bends/Tee duck foot or heel rest, radius for 100 mm bore pipe, complete all as specified and directed.

M&L for Cement concrete (1:2:4) type B-1 using 20mm graded machnically crushed stone agg as in benching, coping, plinth course, bands stops etc incl necessary form works complete all as specified and directed.

Plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregates as surface channel/drains inside the manholes and like including weathering, sightly rounded or chamfered angles and throating as directed and provision of necessary formwork to any extent and finished exposed surface even and smooth without using extra cement complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster and putting aluminium channel in groove of required size complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

M/s K S Builders

M/S MAHAR CONSTRUCTION

Sethi Brothers

deva engineers

GIRENDRA SINGH AND CO

MUKTA AND COMPANY

M/S SINGH ELECTRIC CO

THENUA BUILDERS

M/S RAVI CONSTRUCTIONS