PROVISION OF TRAINING SHED AT CG DHQ-3 MANGALORE UNDER GE(I)(CG) GOA

Amount

SCH A PART - I [ B/R ITEMS] Excavation in trenches width not exceeding 1.5mtr and depth not exceeding 1.5metre for foundations, not exceeding 10 Sqm on plan for manholes etc and getting out in hard/dense soil, complete all as specified and directed.

All as per item No. 01 but exc 1.50m and not exc 3.0 m in deep and getting out hard/dense soil.complete all as specified and directed.

Returning filling in hard/dense soil including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. Total Quantity = 15.75 (SCH A PART -I) + 3.00 ( SCH A PART-II) = 18.75 Cum

M&L for Plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) as in foundation mass concrete filling complete all as specified and directed.

M&L for formwork to sides of concrete foundation, footing, bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and directed.

M&L for formwork to sides of pillar, post, struts, piers, columns and stanchios for rough finished surface complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for Reinforced cement concrete design mix M30 (20mm graded aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and directed.

M&L for Reinforced cement concrete design mix M30 (20mm graded aggregates) in Columns, pillars, piers, posts and struts. complete all as specified and directed.

M&L for Reinforced cement concrete design mix M30 (20mm graded aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span. complete all as specified and directed.

S& F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip. complete all as specified and directed.

_ditto_ as item No. 12, but 5mm dia and over upto and including 10mm dia, in stirrups, spacers and binders. complete all as specified and directed.

S&F Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F Fe 410W (Gde E-250) quality A for 6mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment to bottom of GI pipe complete all as specified and as directed conforming to Fe-410W. complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S& F for 2mm thick polycarbonate sheet of any colour or texture as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brickwork or concrete surface, and finished even and smooth without using extra cement.complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of primer

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.complete all as specified and directed.

M&L for plain cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 50 mm thick in flooring.complete all as specified and directed.

S&F Glass dividing strips, 3mm thick, 22 mm width as in flooring.complete all as specified and directed.

S&F UPVC (SWR) pipes 150 mm dia as in PVC gutter.complete all as specified and directed.

S&F PVC(SWR) pipes 75 mm dia single socketed in any length, with rubber rings, fixed to walls.complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia.complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges.complete all as specified and directed.

SCH A PART - II [ E/M ITEMS] Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) including taking down the old unsv ceiling fan and deposit to MES Store. complete all as specified and directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 4 core 16 sq mm. complete all as specified and directed.

Supply and fixing LED highbay light 100 W outdoor type complete all as specified and directed.

M&L for laying copper flexible un armoured cable of size 3 core 2.5 SQMM inside PVC Conduit of suitable size for connection of LED highbay lights and control through panel. complete all as specified and directed.

S&F in replacement thermo plastic power distribution board,IP 44, Anti corrosive,Dust,water ,Insulated and shock proof consist of the following components. Panel mounted on angle iron frame 50 x 50 x 6 mm thick duly painted and embedded in PCC 1:3:6.complete all as specified and directed. (a) MCB 4 pole 32 A as incomer -1 No . (b) MCB single pole 10 A as outgoing- 8 Nos (c)16 A 3 pin plug & socket - 4 Nos (d) 10 SQMM terminal block - 4Nos (e) 2.5 SQMM terminal Block - 06 Nos

Supply and lay GI pipe medium grade 40 mm dia as cable protection laid on trench/floor, fixed on pole/wall etc of following sizes.complete all as specified and directed.

M&L for Cutting of existing concret/ interlock road / Hardstanding of size not less than 50 mm for laying of electrical cable in GI pipe and makng good to the disturbed surfaces by providing PCC or same material after laying of electrical cables and returning filling complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft /loose soil.complete all as specified and directed.

Returning filling in including spreading, leveling,watering and well ramming in layers not exc 25 cm in soft /loose soil.complete all as specified and directed.

M&L for spread fine river sand in trenches complete all as specified and directed. Note: For measurement purpose, punned down thickness shall only be taken.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and directed.

Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work.complete all as specified and directed.

M/S V ASSOCIATES (BID ID -3084331)

Gates Infra Construction Co (BID ID -3075918)

KDR CONSTRUCTION (BID ID -3079733)