Providing Internal Electrical wirings, LED lighting fixtures with MCBDBs and SITC of 4X1.5 TR Split AC units for the CPAN Room at 3rd Floor Telephone Bhawan, Cuttack.(SH-Pdg EI and Fans).(2nd call)

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire of the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2X1.5sqmm + 1X1.5sqmm earth wire

4X1.5sqmm + 2X1.5sqmm earth wire

2X2.5sqmm + 1X2.5sqmm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core flexible cable in the existing surface/ recessed steel/ PVC conduit as required.

1X1.5 sq. mm

2X1.5 sq. mm

3X1.5 sq. mm

3X2.5 sq. mm

3X4 sq. mm

Supply of the following sizes PVC insulated & PVC sheathed copper conductor multicore un armoured cable including fixing/laying on wall with C-clamps/in existing conduits/on cable trays with cable ties etc. as required.

3 coreX2.5sqmm

4 coreX2.5sqmm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess/on cable trays including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. (Make: Legrand /Havells/Anchor/Schneider)

1 or 2 Module (75 mmX75 mm)

3 Module (100 mmX75 mm)

6 Module (200 mmX75 mm)

8 Module (125mmX125mm)

12 Module (200 mmX150 mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make: Legrand /Havells/Anchor/Schneider)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make: Legrand /Havells/Anchor/Schneider)

Supply and fixing of computer power supply boards in surface/recessed, consisting of 4nos modular type 10Amps 5 pin shuttered socket and 4nos 10 amps modular type switch with modular GI box, modular plate and front facia i/c interconnections with suitable size PVC insulated copper conductor cable etc. as required. (Make: Legrand/Havells/Schneider)

S/F of 8 modular facia with mounting plate in the existing cut outs of work stations for fixing of modular type switches, sockets and RJ45 jack for providing power supply and ethernet connections to the work station computers etc. as required. (Make: Legrand /Havells/Anchor/Schneider)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Make: Legrand /Havells/Anchor/Schneider)

10 A Modular switch

3 pin 10 A Modular shuttered socket

15/16 A Modular switch

6 pin 5/6A & 15/16 A modular shuttered socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supply and fixing 4 way (8 + 12) horizontal type 3 phase and neutral MCB distribution board of sheet steel, IP-43 with metal door, suitable for flush mounting and surface mounting, with 100Amps copper bus bar for each phase with neutral bar, earth bar and cable ties for cable management, fully insulated busbar & shrouded neutral bars, pre-fitted masking sheet, reversible door with provision for fixing four pole MCB/Isolator /RCCB/RCBO as incomer and SPMCB's as outgoing etc. as per IEC 61439-3 and grouting in wall as required.(Make: Legrand/ L&T / Schneider Electric/ Siemens / ABB)

Supply and fixing 12 way 1 phase and neutral MCB distribution board of sheet steel, IP-43 with metal door, suitable for flush mounting and surface mounting with 100Amps copper bus bar with neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bars, pre-fitted masking sheet, reversible door etc. as per IEC 61439-3 and grouting in wall as required. (Make: Legrand/ L&T / Schneider Electric/ Siemens / ABB)

Supply and fixing of Cable End box for the following IP 43 MCBDBs suitable for mounting on the top/bottom of the DB and provision for keeping extra cables/mounting terminal blocks/use as terminal box adaptor. (Make: Legrand/ L&T / Schneider Electric/ Siemens / ABB)

For ETPN 4 way DB

For SPN 12 way DB

Supplying and fixing following rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make: Legrand/ L&T / Schneider Electric/ Siemens / ABB)

6-32Amps Single pole

40-63Amps Double pole

6-32Amps 4 Pole

40-63Amps 4 Pole

Blanking plate

Supply and fixing 2'x2' ultra-modern recess mounting luminaire of luminous flux not less than 3600 lumens for general purpose square shaped luminaire with CRCA housing and high transmittivity diffuser, inbuilt electronic driver, colour Temperature: 6500°K ± 5%, CRI: ≥80 , luminous efficacy: ≥100 Lm/W, operating voltage 220-240 volt, 50 Hz AC supply with high performance LEDs, suitable for mounting with Armstrong/grid ceiling along with Ceiling light fixtures suspension cable kit fitting, hanging chains, adjustable trim length (3.2ft) including connection, testing etc. complete as required. (Make :-Phillips / Havells / Crompton / Bajaj)

Supply and fixing of 34watt, surface /suspended and wall mounted LED batten having CRCA housing & polycarbonate diffuser, built-In electronic driver with initial Lumen efficacy >=120 lm/W, initial corr.color Temperature 6500K, Initial CRI > 80, suitable for operation on 140-270V 50HZ AC supply including connection , testing etc. as required. (Make:Havells/Phillips/Crompton/Bajaj)

Supply and fixing of 34watt, surface /suspended and wall mounted LED batten having CRCA housing & polycarbonate diffuser, built-In electronic driver with initial Lumen efficacy >=120 lm/W, initial corr.color Temperature 6500K, Initial CRI > 80, suitable for operation on 140-270V 50HZ AC supply including connection , testing etc. as required. (Make:Havells/Phillips/Crompton/Bajaj)

Supply and fixing of 15 watt round shaped surface type LED luminaire of lumen output not less than 1600 lm, corr.color temp. 6500K, with polycarbonate body with inbuilt electronic LED driver suitable for operation on 140-270 volt, 50 Hz AC supply etc. as required. (Make :-Phillips / Havells / Crompton / Bajaj)

Supply and fixing of 20 watt, colour temperature: 6000K ± 5%, energy efficiency 4ft (T8), Luminous efficiency: ≥100lm/watt, CRI: ≥ 80, cool day light LED retrofit Tube rods having integrated driver and glass body suitable for operation on 85-285V AC supply etc. as required. (Make :-Phillips / Havells / Crompton / Bajaj)

Supply of the following sizes PVC insulated & PVC sheathed Aluminium conductor armoured cable 650/1100 V. grade confirming to IS : 7098 (Part-1) 1988 etc. as required. (Make- Polycab/Havells/Glowstar/ISI)

3½ X 50 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Above 35 sq. mm and up to 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Above 35 sq. mm and up to 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing Duct/Air as required.

Above 35 sq. mm and up to 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on the Cable Trays as required.

Above 35 sq. mm and up to 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supply and making MV cable end terminations with brass compression gland and copper / aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE copper/aluminium conductor cable of 1.1 KV grade as required.

3½ X 50 sq. mm (35mm) Aluminium conductor cable

Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray (galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors including bends, Tees, cross members and reducers suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. (Make-MEM/Bharti/Ratan/Slotco/Profab)

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

Supply and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply and fixing of earth bus of 50 mm x 5 mm GI strip on surface above suitable size insulators, drilling holes for connections etc. complete as required.

Supply and Fixing of MCB protected Socket outlet 4 modules with metal box comprising of 01no. 25Amps socket and 01no. 25Amps Plug and 01no. 25Amps "C" series SPMCB for Split AC units’ i/c grouting in wall, connection, testing etc. as required. (Make: Legrand/ L&T / Schneider Electric/ Siemens / ABB)

Supply and laying of 2.0mm thick Rubber mat as per IS 15652:2006 having High electrical insulation resistance, 100% shock proof, fire retardant, moisture proof, washable type suitable for providing at electrical panels etc. as required. (Make- ISI)